Anyang University

In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. For example, a key point that needs to be emphasized is thatthere is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process versus those that measure flux through the autophagy pathway (i.e., the completeprocess including the amount and rate of cargo sequestered and degraded). In particular, a block in macroautophagy that results in autophagosome accumulation must be differentiated from stimuli that increase autophagic activity, defined as increasedautophagy induction coupled with increased delivery to, and degradation within, lysosomes (inmost higher eukaryotes and some protists such as Dictyostelium) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the field understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in manycases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. It is worth emphasizing here that lysosomal digestion is a stage of autophagy and evaluating its competence is a crucial part of the evaluation of autophagic flux, or complete autophagy. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as forreviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multipleassays to monitor autophagy. Along these lines, because of the potential for pleiotropic effects due to blocking autophagy through genetic manipulation, it is imperative to target by gene knockout or RNA interference more than one autophagyrelated protein. In addition, some individual Atg proteins, or groups of proteins, are involved in other cellular pathways implying that not all Atg proteins can be used as a specific marker for an autophagic process. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular assays, we hope to encourage technical innovation in the field.

Humans rely increasingly on sensors to address grand challenges and to improve quality of life in the era of digitalization and big data. For ubiquitous sensing, flexible sensors are developed to overcome the limitations of conventional rigid counterparts. Despite rapid advancement in bench-side research over the last decade, the market adoption of flexible sensors remains limited. To ease and to expedite their deployment, here, we identify bottlenecks hindering the maturation of flexible sensors and propose promising solutions. We first analyze challenges in achieving satisfactory sensing performance for real-world applications and then summarize issues in compatible sensor-biology interfaces, followed by brief discussions on powering and connecting sensor networks. Issues en route to commercialization and for sustainable growth of the sector are also analyzed, highlighting environmental concerns and emphasizing nontechnical issues such as business, regulatory, and ethical considerations. Additionally, we look at future intelligent flexible sensors. In proposing a comprehensive roadmap, we hope to steer research efforts towards common goals and to guide coordinated development strategies from disparate communities. Through such collaborative efforts, scientific breakthroughs can be made sooner and capitalized for the betterment of humanity.

We present possible observing scenarios for the Advanced LIGO, Advanced Virgo and KAGRA gravitational-wave detectors over the next decade, with the intention of providing information to the astronomy community to facilitate planning for multi-messenger astronomy with gravitational waves. We estimate the sensitivity of the network to transient gravitational-wave signals, and study the capability of the network to determine the sky location of the source. We report our findings for gravitational-wave transients, with particular focus on gravitational-wave signals from the inspiral of binary neutron star systems, which are the most promising targets for multi-messenger astronomy. The ability to localize the sources of the detected signals depends on the geographical distribution of the detectors and their relative sensitivity, and [Formula: see text] credible regions can be as large as thousands of square degrees when only two sensitive detectors are operational. Determining the sky position of a significant fraction of detected signals to areas of 5-[Formula: see text] requires at least three detectors of sensitivity within a factor of [Formula: see text] of each other and with a broad frequency bandwidth. When all detectors, including KAGRA and the third LIGO detector in India, reach design sensitivity, a significant fraction of gravitational-wave signals will be localized to a few square degrees by gravitational-wave observations alone.

Discharging dye contaminants into water is a major concern around the world. Among a variety of methods to treat dye-contaminated water, photocatalytic degradation has gained attention as a tool for treating the colored water. Herein, we review the recent advancements in photocatalysis for dye degradation in industrial effluents by categorizing photocatalyst materials into three generations. First generation photocatalysts are composed of single-component materials (e.g., TiO2, ZnO, and CdS), while second generation photocatalysts are composed of multiple components in a suspension (e.g., WO3/NiWO4, BiOI/ZnTiO3, and C3N4/Ag3VO4). Photocatalysts immobilized on solid substrates are regarded as third generation materials (e.g., FTO/WO3-ZnO, Steel/TiO2-WO3, and Glass/P-TiO2). Photocatalytic degradation mechanisms, factors affecting the dye degradation, and the lesser-debated uncertainties related to the photocatalysis are also discussed to offer better insights into environmental applications. Furthermore, quantum yields of different photocatalysts are calculated, and a performance evaluation method is proposed to compare photocatalyst systems for dye degradation. Finally, we discuss the present limitations of photocatalytic dye degradation for field applications and the future of the technology.

Adipose tissue-derived mesenchymal stem cells (AdMSCs) represent an attractive and ethical cell source for stem cell therapy. With the recent demonstration of MSC homing properties, intravenous applications of MSCs to cell-damaged diseases have increased. In the present study, the toxicity and tumorigenicity of human AdMSCs (hAdMSCs) were investigated for clinical application. Culture-expanded hAdMSCs showed the typical appearance, immunophenotype, and differentiation capacity of MSCs, and were genetically stable at least 12 passages in culture. Cells suspended in physiological saline maintained their MSC properties in a cold storage condition for at least 3 days. To test the toxicity of hAdMSCs, different doses of hAdMSCs were injected intravenously into immunodeficient mice, and the mice were observed for 13 weeks. Even at the highest cell dose (2.5×10(8) cells/kg body weight), the SCID mice were viable and had no side effects. A tumorigenicity test was performed in Balb/c-nu nude mice for 26 weeks. Even at the highest cell dose (2×10(8) MSCs/kg), no evidence of tumor development was found. In a human clinical trial, 8 male patients who had suffered a spinal cord injury >12 months previous were intravenously administered autologous hAdMSCs (4×10(8) cells) one time. None of the patients developed any serious adverse events related to hAdMSC transplantation during the 3-month follow-up. In conclusion, the systemic transplantation of hAdMSCs appears to be safe and does not induce tumor development.

We fabricated an acoustic composite structure consisting of a periodic array of interspaced membranes and side holes. Experimental data on the transmission, effective density, and phase velocity are presented. The system exhibits two critical frequencies, ${\ensuremath{\omega}}_{\mathrm{SH}}$ and ${\ensuremath{\omega}}_{c}$. Our metamaterial is double negative and transparent for frequencies lower than ${\ensuremath{\omega}}_{\mathrm{SH}}$. For the frequencies ${\ensuremath{\omega}}_{\mathrm{SH}}<\ensuremath{\omega}<{\ensuremath{\omega}}_{c}$, the medium is opaque and only the density is negative. For the frequencies above ${\ensuremath{\omega}}_{c}$, the system is double positive and transparent. The present medium exhibits a very wide double negative spectral range that opens the possibility of the application of metamaterials for ``white lights.''

Microplastic pollution causes a major concern in the marine environment due to their worldwide distribution, persistence, and adverse effects of these pollutants in the marine ecosystem. Despite its global presence, there is still a lack of information on the effect of microplastics on marine organisms at the molecular level. Herein we demonstrated ingestion and egestion of nano- (0.05 μm) and micro-sized (0.5 and 6 μm) polystyrene microbeads in the marine copepod Paracyclopina nana, and examined molecular responses to exposure to microbeads with in vivo endpoints such as growth rate and fecundity. Also, we proposed an adverse outcome pathway for microplastic exposure that covers molecular and individual levels. This study provides the first insight into the mode of action in terms of microplastic-induced oxidative stress and related signaling pathways in P. nana.

Abstract El Niño and Southern Oscillation (ENSO) is the most prominent year‐to‐year climate fluctuation on Earth, alternating between anomalously warm (El Niño) and cold (La Niña) sea surface temperature (SST) conditions in the tropical Pacific. ENSO exerts its impacts on remote regions of the globe through atmospheric teleconnections, affecting extreme weather events worldwide. However, these teleconnections are inherently nonlinear and sensitive to ENSO SST anomaly patterns and amplitudes. In addition, teleconnections are modulated by variability in the oceanic and atmopsheric mean state outside the tropics and by land and sea ice extent. The character of ENSO as well as the ocean mean state have changed since the 1990s, which might be due to either natural variability or anthropogenic forcing, or their combined influences. This has resulted in changes in ENSO atmospheric teleconnections in terms of precipitation and temperature in various parts of the globe. In addition, changes in ENSO teleconnection patterns have affected their predictability and the statistics of extreme events. However, the short observational record does not allow us to clearly distinguish which changes are robust and which are not. Climate models suggest that ENSO teleconnections will change because the mean atmospheric circulation will change due to anthropogenic forcing in the 21st century, which is independent of whether ENSO properties change or not. However, future ENSO teleconnection changes do not currently show strong intermodel agreement from region to region, highlighting the importance of identifying factors that affect uncertainty in future model projections.

The first stretchable energy-harvesting electronic-skin device capable of differentiating and generating energy from various mechanical stimuli, such as normal pressure, lateral strain, bending, and vibration, is presented. A pressure sensitivity of 0.7 kPa-1 is achieved in the pressure region <1 kPa with power generation of tens of μW cm-2 from a gentle finger touch. As a service to our authors and readers, this journal provides supporting information supplied by the authors. Such materials are peer reviewed and may be re-organized for online delivery, but are not copy-edited or typeset. Technical support issues arising from supporting information (other than missing files) should be addressed to the authors. Please note: The publisher is not responsible for the content or functionality of any supporting information supplied by the authors. Any queries (other than missing content) should be directed to the corresponding author for the article.

Particulate plastics in the terrestrial and aquatic environments are small plastic fragments or beads (i.e., 5 mm down to the nanometre range). They have been frequently referred to as 'micro-plastics' or 'nano-plastics'. Research has identified particulate plastics as a vector for toxic trace elements in the environment. The adsorption of toxic trace elements by particulate plastics may be facilitated by their high surface area and functionalized surfaces (e.g., through the attachment of natural organic matter). Other factors, such as environmental conditions (e.g., pH and water salinity), surface charge, and trace element oxidation status, also influence the adsorption of trace elements onto particulate plastics. Because of their small size and persistence, particulate plastics and the associated toxic trace elements are readily ingested and accumulated in many terrestrial and aquatic organisms. Thus, these plastics can have severe environmental consequences, such as the development of metal toxicity, within aquatic and terrestrial organisms. Humans could also become exposed to particulate plastics through food chain contamination and airborne ingestion. This review provides an overview of the sources of particulate plastics in the environment. To this end, we describe particulate plastics made of synthetic polymers, their origin, and characteristics with emphasis on how particulate plastics and associated toxic trace elements contaminate terrestrial and aquatic ecosystems. Future research needs and strategies are discussed to help reduce the environmental risks of particulate plastics as a potent vector for the transportation of toxic trace elements.

Photoluminescent graphene quantum dots (GQDs) have fascinating optical and electronic properties with numerous promising applications in biomedical engineering. In this work, we first studied the in vivo biodistribution and the potential toxicity of carboxylated photoluminescent GQDs. KB, MDA-MB231, A549 cancer cells, and MDCK normal cell line were chosen as in vitro cell culture models to examine the possible adverse effects of the carboxylated photoluminescent GQDs. The carboxylated GQDs are desirable for increased aqueous solubility. All cancer cells efficiently took up the carboxylated GQDs. No acute toxicity or morphological changes were noted in either system at the tested exposure levels. A long-term in vivo study revealed that the GQDs mainly accumulated in liver, spleen, lung, kidney, and tumor sites after intravenous injection. To reveal any potential toxic effect of the GQDs on treated mice, serum biochemical analysis and histological evaluation were performed. The toxicity results from serum biochemistry and complete blood count study revealed that the GQDs do not cause appreciable toxicity to the treated animals. Finally, we observed no obvious organ damage or lesions for the GQDs treated mice after 21 days of administration at 5 mg/kg or 10 mg/kg dosages. With adequate studies of toxicity, both in vitro and in vivo, photoluminescent GQDs may be considered for biological application.

Transition metal hydroxides (M-OH) and their heterostructures (X|M-OH, where X can be a metal, metal oxide, metal chalcogenide, metal phosphide, etc.) have recently emerged as highly active electrocatalysts for hydrogen evolution reaction (HER) of alkaline water electrolysis. Lattice hydroxide anions in metal hydroxides are primarily responsible for observing such an enhanced HER activity in alkali that facilitate water dissociation and assist the first step, the hydrogen adsorption. Unfortunately, their poor electronic conductivity had been an issue of concern that significantly lowered its activity. Interesting advancements were made when heterostructured hydroxide materials with a metallic and or a semiconducting phase were found to overcome this pitfall. However, in the midst of recently evolving metal chalcogenide and phosphide based HER catalysts, significant developments made in the field of metal hydroxides and their heterostructures catalysed alkaline HER and their superiority have unfortunately been given negligible attention. This review, unlike others, begins with the question of why alkaline HER is difficult and will take the reader through evaluation perspectives, trends in metals hydroxides and their heterostructures catalysed HER, an understanding of how alkaline HER works on different interfaces, what must be the research directions of this field in near future, and eventually summarizes why metal hydroxides and their heterostructures are inevitable for energy-efficient alkaline HER.

Rationally designed FeS ₂ @carbon yolk–shell nanoboxes exhibit impressive electrochemical performance when evaluated as an anode material for sodium-ion batteries.

Abstract The reaction mechanism of α‐MnO 2 having 2×2 tunnel structure with zinc ions in a zinc rechargeable battery, employing an aqueous zinc sulfate electrolyte, was investigated by in situ monitoring structural changes and water chemistry alterations during the reaction. Contrary to the conventional belief that zinc ions intercalate into the tunnels of α‐MnO 2 , we reveal that they actually precipitate in the form of layered zinc hydroxide sulfate (Zn 4 (OH) 6 (SO 4 )⋅5 H 2 O) on the α‐MnO 2 surface. This precipitation occurs because unstable trivalent manganese disproportionates and is dissolved in the electrolyte during the discharge process, resulting in a gradual increase in the pH value of the electrolyte. This causes zinc hydroxide sulfate to crystallize from the electrolyte on the electrode surface. During the charge process, the pH value of the electrolyte decreases due to recombination of manganese on the cathode, leading to dissolution of zinc hydroxide sulfate back into the electrolyte. An analogous phenomenon is also observed in todorokite, a manganese dioxide polymorph with 3×3 tunnel structure that is an indication for the critical role of pH changes of the electrolyte in the reaction mechanism of this battery system.

For decades, turnover frequency (TOF) has served as an accurate descriptor of the intrinsic activity of a catalyst, including those in electrocatalytic reactions involving both fuel generation and fuel consumption. Unfortunately, in most of the recent reports in this area, TOF is often not properly reported or not reported at all, in contrast to the overpotentials at a benchmarking current density. The current density is significant in determining the apparent activity, but it is affected by catalyst-centric parasitic reactions, electrolyte-centric competing reactions, and capacitance. Luckily, a properly calculated TOF can precisely give the intrinsic activity free from these phenomena in electrocatalysis. In this Viewpoint we ask: 1) What makes the commonly used activity markers unsuitable for intrinsic activity determination? 2) How can TOF reflect the intrinsic activity? 3) Why is TOF still underused in electrocatalysis? 4) What methods are used in TOF determination? and 5) What is essential in the more accurate calculation of TOF? Finally, the significance of normalizing TOF by Faradaic efficiency (FE) is stressed and we give our views on the development of universal analytical tools to determine the exact number of active sites and real surface area for all kinds of materials.

The tremendous amount of food waste from diverse sources is an environmental burden if disposed of inappropriately. Thus, implementation of a biorefinery platform for food waste is an ideal option to pursue (e.g., production of value-added products while reducing the volume of waste). The adoption of such a process is expected to reduce the production cost of biodegradable plastics (e.g., compared to conventional routes of production using overpriced pure substrates (e.g., glucose)). This review focuses on current technologies for the production of polyhydroxyalkanoates (PHA) from food waste. Technical details were also described to offer clear insights into diverse pretreatments for preparation of raw materials for the actual production of bioplastic (from food wastes). In this respect, particular attention was paid to fermentation technologies based on pure and mixed cultures. A clear description on the chemical modification of starch, cellulose, chitin, and caprolactone is also provided with a number of case studies (covering PHA-based products) along with a discussion on the prospects of food waste valorization approaches and their economic/technical viability.

Biomaterials with suitable surface modification strategies are contributing significantly to the rapid development of the field of bone tissue engineering. Despite these encouraging results, utilization of biomaterials is poorly translated to human clinical trials potentially due to lack of knowledge about the interaction between biomaterials and the body defense mechanism, the "immune system". The highly complex immune system involves the coordinated action of many immune cells that can produce various inflammatory and anti-inflammatory cytokines. Besides, bone fracture healing initiates with acute inflammation and may later transform to a regenerative or degenerative phase mainly due to the cross-talk between immune cells and other cells in the bone regeneration process. Among various immune cells, macrophages possess a significant role in the immune defense, where their polarization state plays a key role in the wound healing process. Growing evidence shows that the macrophage polarization state is highly sensitive to the biomaterial's physiochemical properties, and advances in biomaterial research now allow well controlled surface properties. This review provides an overview of biomaterial-mediated modulation of the immune response for regulating key bone regeneration events, such as osteogenesis, osteoclastogenesis, and inflammation, and it discusses how these strategies can be utilized for future bone tissue engineering applications.

Accurate temperature field measurement provides critical information in many scientific problems. Herein, a new paradigm for highly sensitive, flexible, negative temperature coefficient (NTC) thermistor-based artificial skin is reported, with the highest temperature sensing ability reported to date among previously reported NTC thermistors. This artificial skin is achieved through the development of a novel monolithic laser-induced reductive sintering scheme and unique monolithic structures. The unique seamless monolithic structure simultaneously integrates two different components (a metal electrode and metal oxide sensing channel) from the same material at ambient pressure, which cannot be achieved by conventional heterogeneous integration through multiple, complex steps of photolithography or vacuum deposition. In addition to superior performance, electronic skin with high temperature sensitivity can be fabricated on heat-sensitive polymer substrates due to the low-temperature requirements of the process. As a proof of concept, temperature-sensitive artificial skin is tested with conformally attachable physiological temperature sensor arrays in the measurement of the temperatures of exhaled breath for the early detection of pathogenic progression in the respiratory system. The proposed highly sensitive flexible temperature sensor and monolithic selective laser reductive sintering are expected to greatly contribute to the development of essential components in various emerging research fields, including soft robotics and healthcare systems.

Sb@C coaxial nanotubes have been designed and synthesized using a facile strategy starting with Sb ₂ S ₃ nanorods. The as-obtained Sb@C nanotubes exhibit unprecedented sodium storage properties.

Abstract Fine particulate matters less than 2.5 µm (PM 2.5 ) in the ambient atmosphere are strongly associated with adverse health effects. However, it is unlikely that all fine particles are equally toxic in view of their different sizes and chemical components. Toxicity of fine particles produced from various combustion sources (diesel engine, gasoline engine, biomass burning (rice straw and pine stem burning), and coal combustion) and non-combustion sources (road dust including sea spray aerosols, ammonium sulfate, ammonium nitrate, and secondary organic aerosols (SOA)), which are known major sources of PM 2.5 , was determined. Multiple biological and chemical endpoints were integrated for various source-specific aerosols to derive toxicity scores for particles originating from different sources. The highest toxicity score was obtained for diesel engine exhaust particles, followed by gasoline engine exhaust particles, biomass burning particles, coal combustion particles, and road dust, suggesting that traffic plays the most critical role in enhancing the toxic effects of fine particles. The toxicity ranking of fine particles produced from various sources can be used to better understand the adverse health effects caused by different fine particle types in the ambient atmosphere, and to provide practical management of fine particles beyond what can be achieved only using PM mass which is the current regulation standard.