Changzhou University

Abstract Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) Omicron sublineages BA.2.12.1, BA.4 and BA.5 exhibit higher transmissibility than the BA.2 lineage 1 . The receptor binding and immune-evasion capability of these recently emerged variants require immediate investigation. Here, coupled with structural comparisons of the spike proteins, we show that BA.2.12.1, BA.4 and BA.5 (BA.4 and BA.5 are hereafter referred collectively to as BA.4/BA.5) exhibit similar binding affinities to BA.2 for the angiotensin-converting enzyme 2 (ACE2) receptor. Of note, BA.2.12.1 and BA.4/BA.5 display increased evasion of neutralizing antibodies compared with BA.2 against plasma from triple-vaccinated individuals or from individuals who developed a BA.1 infection after vaccination. To delineate the underlying antibody-evasion mechanism, we determined the escape mutation profiles 2 , epitope distribution 3 and Omicron-neutralization efficiency of 1,640 neutralizing antibodies directed against the receptor-binding domain of the viral spike protein, including 614 antibodies isolated from people who had recovered from BA.1 infection. BA.1 infection after vaccination predominantly recalls humoral immune memory directed against ancestral (hereafter referred to as wild-type (WT)) SARS-CoV-2 spike protein. The resulting elicited antibodies could neutralize both WT SARS-CoV-2 and BA.1 and are enriched on epitopes on spike that do not bind ACE2. However, most of these cross-reactive neutralizing antibodies are evaded by spike mutants L452Q, L452R and F486V. BA.1 infection can also induce new clones of BA.1-specific antibodies that potently neutralize BA.1. Nevertheless, these neutralizing antibodies are largely evaded by BA.2 and BA.4/BA.5 owing to D405N and F486V mutations, and react weakly to pre-Omicron variants, exhibiting narrow neutralization breadths. The therapeutic neutralizing antibodies bebtelovimab 4 and cilgavimab 5 can effectively neutralize BA.2.12.1 and BA.4/BA.5, whereas the S371F, D405N and R408S mutations undermine most broadly sarbecovirus-neutralizing antibodies. Together, our results indicate that Omicron may evolve mutations to evade the humoral immunity elicited by BA.1 infection, suggesting that BA.1-derived vaccine boosters may not achieve broad-spectrum protection against new Omicron variants.

In this work, with a zeolite-type metal-organic framework as both a precursor and a template and furfuryl alcohol as a second precursor, nanoporous carbon material has been prepared with an unexpectedly high surface area (3405 m(2)/g, BET method) and considerable hydrogen storage capacity (2.77 wt % at 77 K and 1 atm) as well as good electrochemical properties as an electrode material for electric double layer capacitors. The pore structure and surface area of the resultant carbon materials can be tuned simply by changing the calcination temperature.

Cancer is the second leading cause of death in the world and one of the major public health problems. Despite the great advances in cancer therapy, the incidence and mortality rates of cancer remain high. Therefore, the quest for more efficient and less toxic cancer treatment strategies is still at the forefront of current research. Curcumin, the active ingredient of the Curcuma longa plant, has received great attention over the past two decades as an antioxidant, anti-inflammatory, and anticancer agent. In this review, a summary of the medicinal chemistry and pharmacology of curcumin and its derivatives in regard to anticancer activity, their main mechanisms of action, and cellular targets has been provided based on the literature data from the experimental and clinical evaluation of curcumin in cancer cell lines, animal models, and human subjects. In addition, the recent advances in the drug delivery systems for curcumin delivery to cancer cells have been highlighted.

Nucleophilic phosphine catalysis of allenes with electrophiles is one of the most powerful and straightforward synthetic strategies for the generation of highly functionalized carbocycle or heterocycle structural motifs, which are present in a wide range of bioactive natural products and medicinally important substances. The reaction topologies can be controlled through a judicious choice of the phosphine catalyst and the structural variations of starting materials. This Tutorial Review presents selected examples of nucleophilic phosphine catalysis using allenes and electrophiles.

Superelastic conducting fibers with improved properties and functionalities are needed for diverse applications. Here we report the fabrication of highly stretchable (up to 1320%) sheath-core conducting fibers created by wrapping carbon nanotube sheets oriented in the fiber direction on stretched rubber fiber cores. The resulting structure exhibited distinct short- and long-period sheath buckling that occurred reversibly out of phase in the axial and belt directions, enabling a resistance change of less than 5% for a 1000% stretch. By including other rubber and carbon nanotube sheath layers, we demonstrated strain sensors generating an 860% capacitance change and electrically powered torsional muscles operating reversibly by a coupled tension-to-torsion actuation mechanism. Using theory, we quantitatively explain the complementary effects of an increase in muscle length and a large positive Poisson's ratio on torsional actuation and electronic properties.

Tissue engineering (TE) is the approach to combine cells with scaffold materials and appropriate growth factors to regenerate or replace damaged or degenerated tissue or organs. The scaffold material as a template for tissue formation plays the most important role in TE. Among scaffold materials, silk fibroin (SF), a natural protein with outstanding mechanical properties, biodegradability, biocompatibility, and bioresorbability has attracted significant attention for TE applications. SF is commonly dissolved into an aqueous solution and can be easily reconstructed into different material formats, including films, mats, hydrogels, and sponges via various fabrication techniques. These include spin coating, electrospinning, freeze drying, physical, and chemical crosslinking techniques. Furthermore, to facilitate fabrication of more complex SF-based scaffolds with high precision techniques including micro-patterning and bio-printing have recently been explored. This review introduces the physicochemical and mechanical properties of SF and looks into a range of SF-based scaffolds that have been recently developed. The typical TE applications of SF-based scaffolds including bone, cartilage, ligament, tendon, skin, wound healing, and tympanic membrane, will be highlighted and discussed, followed by future prospects and challenges needing to be addressed.

In this perspective, recent developments on palladium and nickel mediated chain walking olefin polymerization and copolymerization with polar functionalized comonomers are described. First, the chain walking polymerization mechanism is discussed followed by its implications in olefin polymerization and copolymerization. Then, recent advances in catalyst design are provided. Special attention is paid to the influence of ligand structures on the catalytic properties. Subsequently, the applications of these chain walking polymerization catalysts in the synthesis of functionalized hyperbranched polymers and copolymers are summarized. Finally, some recent developments and perspectives on very fast and very slow chain walking polymerization catalysts are discussed.

With the expansion of industry, the emission of greenhouse gases is increasing, and its impact on climate is becoming more and more serious. CO2 is the main culprit of the greenhouse effect, and how to effectively solve the climate problem caused by CO2 has attracted more and more attention. In recent years, there have been continuous attempts to reduce CO2 emissions from the source, but no obvious results have been achieved. In fact, CO2 is not only a greenhouse gas, but also a potential carbon resource. Therefore, how to capture and effectively use CO2 is also the research direction that many scholars have been exploring recently. In this paper, the current situations of CO2 capture technologies are reviewed from the aspects of chemical absorption, solid-phase porous materials adsorption, membrane separation, cryogenic separation, hydrate method and microbiological method in the first part. Then, the CO2 utilization technologies are systematically introduced from the aspect of physical utilization, chemical utilization, biological utilization and mineralization utilization. Furthermore, several representative frontier technologies of CO2 resource utilization are reported. On this basis, the advantages and disadvantages of different methods are summarized to provide some ideas and references for alleviating the CO2 issue.

High-capacity power battery can be attained through the elevation of the cut-off voltage for LiNi0.83Co0.12Mn0.05O2 high-nickel material. Nevertheless, unstable lattice oxygen would be released during the lithium deep extraction. To solve the above issues, the electronic structure is reconstructed by substituting Li+ ions with Y3+ ions. The dopant within the Li layer could transfer electrons to the adjacent lattice oxygen. Subsequently, the accumulated electrons in the oxygen site are transferred to nickel of highly valence state under the action of the reduction coupling mechanism. The modified strategy suppresses the generation of oxygen defects by regulating the local electronic structure, but more importantly, it reduces the concentration of highly reactive Ni4+ species during the charging state, thus avoiding the evolution of an unexpected phase transition. Strengthening the coupling strength between the lithium layers and transition metal layers finally realizes the fast-charging performance improvement and the cycling stability enhancement under high voltage. Authors report on restructuring the electronic structure of a high-nickel material by substituting Li+ ions with Y3+ ions. This strategy suppresses the generation of oxygen defects with a reduction coupling mechanism improving high-voltage stability.

Biofilm infections can induce chronic inflammation and stall the normal orchestrated course of wound-healing cascades. Herein, pH-switchable antimicrobial hydrogel with nanofiber networks for biofilm eradication and rescuing stalled healing in chronic wounds is reported on the basis of the self-assembly of a designed octapeptide (IKFQFHFD) at neutral pH. This hydrogel is biocompatible and exhibits an acidic pH (pathological environment of infected chronic wounds)-switchable broad-spectrum antimicrobial effect via a mechanism involving cell wall and membrane disruption. The antimicrobial activity of hydrogel is derived from its acidic pH-dependent nanofiber network destabilization and activated release of IKFQFHFD, which is antimicrobial only at acidic pH due to the antimicrobial peptide-like molecular structure. In addition, supramolecular nanofiber networks loaded with drugs of cypate (photothermal agent) and proline (procollagen component) are further developed. In vitro experiments show that loaded drugs exhibit acidic pH (pH ∼ 5.5)-responsive release profiles, and synergistic biofilm eradication and subsequent healing cascade activation of cells proliferation are achieved on the basis of the supramolecular nanofiber networks. Remarkably, the nanofiber networks of hydrogel enable in vivo complete healing of MRSA biofilm infected wound in diabetic mice within 20 days, showing great potential as promising chronic wound dressings. The proposed synergistic strategy for eradicating biofilm and activating subsequent healing cascades may offer a powerful modality for the management of clinical chronic wounds.

Abstract In this study, we propose a versatile method for synthesizing uniform three‐dimensional (3D) metal carbides, nitrides, and carbonitrides (MXenes)/metal–organic frameworks (MOFs) composites (Ti 3 C 2 T X /Cu‐BTC, Ti 3 C 2 T X /Fe,Co‐PBA, Ti 3 C 2 T X /ZIF‐8, and Ti 3 C 2 T X /ZIF‐67) that combine the advantages of MOFs and MXenes to enhance stability and improve conductivity. Subsequently, 3D hollow Ti 3 C 2 T X /ZIF‐67/CoV 2 O 6 composites with excellent electron‐ and ion‐transport properties derived from Ti 3 C 2 T X /ZIF‐67 were synthesized. The specific capacitance of the Ti 3 C 2 T X /ZIF‐67/CoV 2 O 6 electrode was 285.5 F g −1 , which is much higher than that of the ZIF‐67 and Ti 3 C 2 T X /ZIF‐67 electrode. This study opens a new avenue for the design and synthesis of MXene/MOF composites and complex hollow structures with tailorable structures and compositions for various applications.

We have developed structure/toxicity relationships for amorphous silica nanoparticles (NPs) synthesized through low-temperature colloidal (e.g., Stöber silica) or high-temperature pyrolysis (e.g., fumed silica) routes. Through combined spectroscopic and physical analyses, we have determined the state of aggregation, hydroxyl concentration, relative proportion of strained and unstrained siloxane rings, and potential to generate hydroxyl radicals for Stöber and fumed silica NPs with comparable primary particle sizes (16 nm in diameter). On the basis of erythrocyte hemolytic assays and assessment of the viability and ATP levels in epithelial and macrophage cells, we discovered for fumed silica an important toxicity relationship to postsynthesis thermal annealing or environmental exposure, whereas colloidal silicas were essentially nontoxic under identical treatment conditions. Specifically, we find for fumed silica a positive correlation of toxicity with hydroxyl concentration and its potential to generate reactive oxygen species (ROS) and cause red blood cell hemolysis. We propose fumed silica toxicity stems from its intrinsic population of strained three-membered rings (3MRs) along with its chainlike aggregation and hydroxyl content. Hydrogen-bonding and electrostatic interactions of the silanol surfaces of fumed silica aggregates with the extracellular plasma membrane cause membrane perturbations sensed by the Nalp3 inflammasome, whose subsequent activation leads to secretion of the cytokine IL-1β. Hydroxyl radicals generated by the strained 3MRs in fumed silica, but largely absent in colloidal silicas, may contribute to the inflammasome activation. Formation of colloidal silica into aggregates mimicking those of fumed silica had no effect on cell viability or hemolysis. This study emphasizes that not all amorphous silicas are created equal and that the unusual toxicity of fumed silica compared to that of colloidal silica derives from its framework and surface chemistry along with its fused chainlike morphology established by high-temperature synthesis (>1300 °C) and rapid thermal quenching.

ConspectusCatalytic atroposelective syntheses of axially chiral compounds have stimulated extensive interest in multiple communities, such as synthetic chemistry, biochemistry, and materials science, because of the intriguing characteristics of atropisomerism. In particular, atropisomeric indole derivatives, which contain a kind of five-membered heterocyclic framework, are widely distributed in a number of natural alkaloids, biologically relevant compounds, chiral ligands, and chiral organocatalysts. Hence, the catalytic atroposelective synthesis of indole derivatives bearing axial chirality is of considerable importance and has become an emerging focus of research. However, there are substantial challenges associated with the atroposelective synthesis of indole derivatives, including remote ortho-substituents around the chiral axis, a lower barrier for rotation, and a weaker configurational stability than that of atropisomeric six-membered biaryls. Therefore, the development of effective strategies toward the catalytic atroposelective synthesis of indole derivatives has become an urgent task.In order to tackle these challenges and to accomplish the task, our group devised a unique strategy of designing indole-derived platform molecules and developing organocatalytic enantioselective transformations of such platform molecules to synthesize atropisomeric indole derivatives; asymmetric organocatalysis has tremendous advantages and was the research area recognized by the Nobel Prize in Chemistry in 2021. This Account summarizes our endeavors in the organocatalytic atroposelective synthesis of indole derivatives bearing axial chirality. In brief, we devised and developed a series of indole-derived platform molecules, such as indolylmethanols, (hetero)aryl indoles, oxindole-based styrenes, N-aminoindoles, and indole-based homophthalic anhydrides, by introducing different functional groups onto the indole ring to achieve new reactivity and modulate the reactive site of the indole ring. As a result, these indole-derived platform molecules possess versatile and unique reactivity and are capable of undergoing a variety of organocatalytic enantioselective transformations for preparing structurally diversified indole derivatives with axial chirality.We used these strategies to accomplish the atroposelective synthesis of plenty of indole derivatives with axial chirality, including (hetero)aryl indoles, alkene-indoles, oxindole-based styrenes, N-pyrrolylindoles, and isochromenone-indoles. In addition, we gave a thorough and detailed understanding of the designed reaction by investigating the reaction pathway and activation mode. More importantly, we studied the biological activity of some products and performed catalyst design on the basis of atropisomeric indole moieties, which are helpful for disclosing more applications of indole derivatives bearing axial chirality.In the future, the organocatalytic atroposelective synthesis of indole derivatives bearing axial chirality will indubitably remain a frontier topic in the research area of asymmetric catalysis and chiral indole chemistry despite challenging issues, for instance, the atroposelective synthesis of novel indole derivatives bearing an unconventional chiral axis, the development of atropisomeric indole derivatives into powerful catalysts or ligands, and the discovery of atroposelective indole derivatives as potent drug candidates. We hope our efforts summarized in this Account will encourage chemists worldwide to devise innovative strategies toward solving the challenging issues that remain in this field, thus promoting its development to a higher level.

Metal-organic frameworks (MOFs) have recently received increasing interest due to their potential application in the energy storage and conversion field. Herein, cobalt-based layered MOF ({[Co(Hmt)(tfbdc)(H2O)2]·(H2O)2}n, Co-LMOF; Hmt = hexamethylenetetramine; H2tfbdc = 2,3,5,6-tetrafluoroterephthalic acid) has been evaluated as an electrode material for supercapacitors. The Co-LMOF electrode exhibits a high specific capacitance and excellent cycling stability. Its maximum specific capacitance is 2474 F g(-1) at a current density of 1 A g(-1), and the specific capacitance retention is about 94.3% after 2000 cycles. The excellent electrochemical property may be ascribed to the intrinsic nature of Co-LMOF, enough space available for the storage and diffusion of the electrolyte, and the particles of nanoscale size.

Abstract Flexible perovskite solar cells (f‐PSCs) have attracted great attention because of their unique advantages in lightweight and portable electronics applications. However, their efficiencies are far inferior to those of their rigid counterparts. Herein, a novel histamine diiodate (HADI) is designed based on theoretical study to modify the SnO 2 /perovskite interface. Systematic experimental results reveal that the HADI serves effectively as a multifunctional agent mainly in three aspects: 1) surface modification to realign the SnO 2 conduction band upward to improve interfacial charge extraction; 2) passivating the buried perovskite surface, and 3) bridging between the SnO 2 and perovskite layers for effective charge transfer. Consequently, the rigid MA‐free PSCs based on the HADI‐SnO 2 electron transport layer (ETL) display not only a high champion power conversion efficiency (PCE) of 24.79% and open‐circuit voltage ( V OC ) of 1.20 V but also outstanding stability as demonstrated by the PSCs preserving 91% of their initial efficiencies after being exposed to ambient atmosphere for 1200 h without any encapsulation. Furthermore, the solution‐processed HADI‐SnO 2 ETL formed at low temperature (100 °C) is utilized in f‐PSCs that achieve a PCE as high as 22.44%, the highest reported PCE for f‐PSCs to date.

Due to the energy crisis within recent decades, renewable energies such as solar, wind and tide energies have received a lot of attention. However, these renewable energies are dependent on the time and season. Consequently, energy storage systems are needed to fully utilize these energies including their connection with smart grids. Aqueous rechargeable lithium batteries (ARLBs) may be an ideal energy storage system due to its excellent safety and reliability. However, since the introduction of ARLBs in 1994, the progress on improving their performance has been very limited. Recently, their rate performance, especially superfast charging performance, reversible capacity and cycling life of their electrode materials were markedly improved. The present work reviews the latest advances in the exploration of the electrode materials and the development of battery systems. Also the main challenges in this field are briefly commented on and discussed.

β-Arrestins (βarrs) interact with G protein-coupled receptors (GPCRs) to desensitize G protein signaling, to initiate signaling on their own, and to mediate receptor endocytosis. Prior structural studies have revealed two unique conformations of GPCR-βarr complexes: the "tail" conformation, with βarr primarily coupled to the phosphorylated GPCR C-terminal tail, and the "core" conformation, where, in addition to the phosphorylated C-terminal tail, βarr is further engaged with the receptor transmembrane core. However, the relationship of these distinct conformations to the various functions of βarrs is unknown. Here, we created a mutant form of βarr lacking the "finger-loop" region, which is unable to form the core conformation but retains the ability to form the tail conformation. We find that the tail conformation preserves the ability to mediate receptor internalization and βarr signaling but not desensitization of G protein signaling. Thus, the two GPCR-βarr conformations can carry out distinct functions.

Memristors can be employed to mimic biological neural synapses or to describe electromagnetic induction effects. To exhibit the threshold effect of electromagnetic induction, this paper presents a threshold flux-controlled memristor and examines its frequency-dependent pinched hysteresis loops. Using an electromagnetic induction current generated by the threshold memristor to replace the external current in 2-D Hindmarsh-Rose (HR) neuron model, a 3-D memristive HR (mHR) neuron model with global hidden oscillations is established and the corresponding numerical simulations are performed. It is found that due to no equilibrium point, the obtained mHR neuron model always operates in hidden bursting firing patterns, including coexisting hidden bursting firing patterns with bistability also. In addition, the model exhibits complex dynamics of the actual neuron electrical activities, which acts like the 3-D HR neuron model, indicating its feasibility. In particular, by constructing the fold and Hopf bifurcation sets of the fast-scale subsystem, the bifurcation mechanisms of hidden bursting firings are expounded. Finally, circuit experiments on hardware breadboards are deployed and the captured results well match with the numerical results, validating the physical mechanism of biological neuron and the reliability of electronic neuron.

MOTIVATION: Computational prediction of compound-protein interactions (CPIs) is of great importance for drug design and development, as genome-scale experimental validation of CPIs is not only time-consuming but also prohibitively expensive. With the availability of an increasing number of validated interactions, the performance of computational prediction approaches is severely impended by the lack of reliable negative CPI samples. A systematic method of screening reliable negative sample becomes critical to improving the performance of in silico prediction methods. RESULTS: This article aims at building up a set of highly credible negative samples of CPIs via an in silico screening method. As most existing computational models assume that similar compounds are likely to interact with similar target proteins and achieve remarkable performance, it is rational to identify potential negative samples based on the converse negative proposition that the proteins dissimilar to every known/predicted target of a compound are not much likely to be targeted by the compound and vice versa. We integrated various resources, including chemical structures, chemical expression profiles and side effects of compounds, amino acid sequences, protein-protein interaction network and functional annotations of proteins, into a systematic screening framework. We first tested the screened negative samples on six classical classifiers, and all these classifiers achieved remarkably higher performance on our negative samples than on randomly generated negative samples for both human and Caenorhabditis elegans. We then verified the negative samples on three existing prediction models, including bipartite local model, Gaussian kernel profile and Bayesian matrix factorization, and found that the performances of these models are also significantly improved on the screened negative samples. Moreover, we validated the screened negative samples on a drug bioactivity dataset. Finally, we derived two sets of new interactions by training an support vector machine classifier on the positive interactions annotated in DrugBank and our screened negative interactions. The screened negative samples and the predicted interactions provide the research community with a useful resource for identifying new drug targets and a helpful supplement to the current curated compound-protein databases. AVAILABILITY: Supplementary files are available at: http://admis.fudan.edu.cn/negative-cpi/.

Abstract Hydrogen peroxide (H 2 O 2 ) is an environment‐friendly and efficient oxidant with a wide range of applications in different industries. Recently, the production of hydrogen peroxide through direct electrosynthesis has attracted widespread research attention, and has emerged as the most promising method to replace the traditional energy‐intensive multi‐step anthraquinone process. In ongoing efforts to achieve highly efficient large‐scale electrosynthesis of H 2 O 2 , carbon‐based materials have been developed as 2e − oxygen reduction reaction catalysts, with the benefits of low cost, abundant availability, and optimal performance. This review comprehensively introduces the strategies for optimizing carbon‐based materials toward H 2 O 2 production, and the latest advances in carbon‐based hybrid catalysts. The active sites of the carbon‐based materials and the influence of coordination heteroatom doping on the selectivity of H 2 O 2 are extensively analyzed. In particular, the appropriate design of functional groups and understanding the effect of the electrolyte pH are expected to further improve the selective efficiency of producing H 2 O 2 via the oxygen reduction reaction. Methods for improving catalytic activity by interface engineering and reaction kinetics are summarized. Finally, the challenges carbon‐based catalysts face before they can be employed for commercial‐scale H 2 O 2 production are identified, and prospects for designing novel electrochemical reactors are proposed.