Chimie ParisTech

While the Born elastic stability criteria are well known for cubic crystals, there is some confusion in the literature about the form they should take for lower-symmetry crystal classes. Here we present closed form necessary and sufficient conditions for elastic stability in all crystal classes, as a concise and pedagogical reference to stability criteria in noncubic materials.

It is difficult to mix solutions in microchannels. Under typical operating conditions, flows in these channels are laminar-the spontaneous fluctuations of velocity that tend to homogenize fluids in turbulent flows are absent, and molecular diffusion across the channels is slow. We present a passive method for mixing streams of steady pressure-driven flows in microchannels at low Reynolds number. Using this method, the length of the channel required for mixing grows only logarithmically with the Péclet number, and hydrodynamic dispersion along the channel is reduced relative to that in a simple, smooth channel. This method uses bas-relief structures on the floor of the channel that are easily fabricated with commonly used methods of planar lithography.

In this tutorial review, we show how Time-Dependent Density Functional Theory (TD-DFT) has become a popular tool for computing the signatures of electronically excited states, and more specifically, the properties directly related to the optical (absorption and emission) spectra of molecules. We discuss the properties that can be obtained with widely available programs as well as how to account for the environmental effects (solvent and surfaces) and present recent applications in these fields. We next expose the transformation of the TD-DFT results into chemically intuitive parameters (colours as well as charge-transfer distances). Eventually, the non-specialised reader will find a series of advices and warnings necessary to perform her/his first TD-DFT calculations.

We report on the implementation of a tool for the analysis of second-order elastic stiffness tensors, provided with both an open-source Python module and a standalone online application allowing the visualization of anisotropic mechanical properties. After describing the software features, how we compute the conventional elastic constants and how we represent them graphically, we explain our technical choices for the implementation. In particular, we focus on why a Python module is used to generate the HTML web page with embedded Javascript for dynamical plots.

The technical part of these Guidelines and Recommendations, produced under the auspices of EFSUMB, provides an introduction to the physical principles and technology on which all forms of current commercially available ultrasound elastography are based. A difference in shear modulus is the common underlying physical mechanism that provides tissue contrast in all elastograms. The relationship between the alternative technologies is considered in terms of the method used to take advantage of this. The practical advantages and disadvantages associated with each of the techniques are described, and guidance is provided on optimisation of scanning technique, image display, image interpretation and some of the known image artefacts.

With the aim of defining the spatial extent associated to an electronic transition, of particular relevance in the case of charge-transfer (CT) excitations, a new index, evaluated only from the computed density for the ground and excited state, is here derived and tested on a family of molecules that can be considered as prototypes of push-pull chromophores.The index (DCT) allows to define the spatial extent associated to a given transition as well as the associated fraction of electron transferred. By definition of centroids of charges associated to the density increase and depletion zones upon excitation, a qualitative and easy to visualize measure of the spatial extent of the donor and the acceptor moieties within a given molecular system is also given. Finally, an index (t) allowing to define the presence eventually pathologic CT transitions for time-dependent density functional theory treatment in conjunction with standard generalized gradient approximation or hybrid functional, that is through space CT, is disclosed.

Extensive Time-Dependent Density Functional Theory (TD-DFT) calculations have been carried out in order to obtain a statistically meaningful analysis of the merits of a large number of functionals. To reach this goal, a very extended set of molecules (∼500 compounds, >700 excited states) covering a broad range of (bio)organic molecules and dyes have been investigated. Likewise, 29 functionals including LDA, GGA, meta-GGA, global hybrids, and long-range-corrected hybrids have been considered. Comparisons with both theoretical references and experimental measurements have been carried out. On average, the functionals providing the best match with reference data are, one the one hand, global hybrids containing between 22% and 25% of exact exchange (X3LYP, B98, PBE0, and mPW1PW91) and, on the other hand, a long-range-corrected hybrid with a less-rapidly increasing HF ratio, namely LC-ωPBE(20). Pure functionals tend to be less consistent, whereas functionals incorporating a larger fraction of exact exchange tend to underestimate significantly the transition energies. For most treated cases, the M05 and CAM-B3LYP schemes deliver fairly small deviations but do not outperform standard hybrids such as X3LYP or PBE0, at least within the vertical approximation. With the optimal functionals, one obtains mean absolute deviations smaller than 0.25 eV, though the errors significantly depend on the subset of molecules or states considered. As an illustration, PBE0 and LC-ωPBE(20) provide a mean absolute error of only 0.14 eV for the 228 states related to neutral organic dyes but are completely off target for cyanine-like derivatives. On the basis of comparisons with theoretical estimates, it also turned out that CC2 and TD-DFT errors are of the same order of magnitude, once the above-mentioned hybrids are selected.

Metal-catalyzed cycloisomerization reactions of 1,n-enynes have appeared as conceptually and chemically highly attractive processes as they contribute to the highly demanded search for atom economy and allow the discovery of new reactions. Since the pioneering studies with palladium by the research group of Barry Trost in the mid-1980s, several other metals have been identified as excellent catalysts for the rearrangement of enyne skeletons. Moreover, the behavior of 1,n-enynes may be influenced by other functional groups such as alcohols, aldehydes, ethers, alkenes, or alkynes, thus enhancing the molecular complexity of the synthesized products. Apart from the intrinsic rearrangements of 1,n-enynes, several tandem reactions incorporating intramolecular trapping agents or intermolecular partners have been discovered. This Review aims to highlight the main contributions in this field of catalysis and to propose and comment on the mechanistic insights of the recent discoveries.

The clinical part of these Guidelines and Recommendations produced under the auspices of the European Federation of Societies for Ultrasound in Medicine and Biology EFSUMB assesses the clinically used applications of all forms of elastography, stressing the evidence from meta-analyses and giving practical advice for their uses and interpretation. Diffuse liver disease forms the largest section, reflecting the wide experience with transient and shear wave elastography . Then follow the breast, thyroid, gastro-intestinal tract, endoscopic elastography, the prostate and the musculo-skeletal system using strain and shear wave elastography as appropriate. The document is intended to form a reference and to guide clinical users in a practical way.

Black carbon (BC), the product of incomplete combustion of fossil fuels and biomass (called elemental carbon (EC) in atmospheric sciences), was quantified in 12 different materials by 17 laboratories from different disciplines, using seven different methods. The materials were divided into three classes: (1) potentially interfering materials, (2) laboratory‐produced BC‐rich materials, and (3) BC‐containing environmental matrices (from soil, water, sediment, and atmosphere). This is the first comprehensive intercomparison of this type (multimethod, multilab, and multisample), focusing mainly on methods used for soil and sediment BC studies. Results for the potentially interfering materials (which by definition contained no fire‐derived organic carbon) highlighted situations where individual methods may overestimate BC concentrations. Results for the BC‐rich materials (one soot and two chars) showed that some of the methods identified most of the carbon in all three materials as BC, whereas other methods identified only soot carbon as BC. The different methods also gave widely different BC contents for the environmental matrices. However, these variations could be understood in the light of the findings for the other two groups of materials, i.e., that some methods incorrectly identify non‐BC carbon as BC, and that the detection efficiency of each technique varies across the BC continuum. We found that atmospheric BC quantification methods are not ideal for soil and sediment studies as in their methodology these incorporate the definition of BC as light‐absorbing material irrespective of its origin, leading to biases when applied to terrestrial and sedimentary materials. This study shows that any attempt to merge data generated via different methods must consider the different, operationally defined analytical windows of the BC continuum detected by each technique, as well as the limitations and potential biases of each technique. A major goal of this ring trial was to provide a basis on which to choose between the different BC quantification methods in soil and sediment studies. In this paper we summarize the advantages and disadvantages of each method. In future studies, we strongly recommend the evaluation of all methods analyzing for BC in soils and sediments against the set of BC reference materials analyzed here.

The π → π* transitions of more than 100 organic dyes from the major classes of chromophores (quinones, diazo, ...) have been investigated using a Time-Dependent Density Functional Theory (TD-DFT) procedure relying on large atomic basis sets and the systematic modeling of solvent effects. These calculations have been performed with pure (PBE) as well as conventional (PBE0) and long-range (LR) corrected hybrid functionals (LC-PBE, LC-ωPBE, and CAM-B3LYP). The computed wavelengths are systematically guided by the percentage of exact exchange included at intermediate interelectronic distance, i.e., the λmax value always follows the PBE > PBE0 > CAM-B3LYP > LC-PBE > LC-ωPBE > HF sequence. The functional giving the best estimates of the experimental transition energies may vary, but PBE0 and CAM-B3LYP tend to outperform all other approaches. The latter functional is shown to be especially adequate to treat molecules with delocalized excited states. The mean absolute error provided by PBE0 is 22 nm (0.14 eV) with no deviation exceeding 100 nm (0.50 eV): PBE0 is able to deliver reasonable estimates of the color of most organic dyes of practical or industrial interest. By using a calibration curve, we found that the LR functionals systematically allow an even more consistent description of the low-lying excited-state energies than the conventional hybrids. Indeed, linearly corrected LR approaches yield an average error of 10 nm for each dye family. Therefore, when such statistical treatments can be designed for given sets of dyes, a simple and rapid theoretical procedure allows both a chemically sound and a numerically accurate description of the absorption wavelengths.

Who would have thought before 1986 that an enantiomerically impure catalyst could give a product in an asymmetric synthesis with an enantiomeric excess higher than that of the catalyst? Until then it was assumed that the ee value of the product (eeprod) from an asymmetric synthesis was linearly correlated to the ee value of the chiral auxiliary (eeaux)—in fact a large deviation is possible (see diagram). These nonlinear effects are not only of academic interest since they have a variety of practical uses, which are highlighted in this review.

Synthesis of aliphatic polyesters has been studied intensively due to their biocompatible and biodegradable properties and their potential applications in medical and agricultural fields. There has been particular emphasis over the past decade on the synthesis of discrete, well-characterized complexes that are active polymerization initiators for the ring-opening polymerization (ROP) of lactide (LA) and beta-butyrolactone (BBL) to give, respectively, poly(lactide) (PLA) and poly(3-hydroxybutyrate) (PHB). These recent advances in catalyst design have led to a variety of polyester microstructures. This tutorial review focuses on the use of metal-based complexes for the stereoselective ROP of rac-LA and rac-BBL.

Fluorescence is increasingly used for in vivo imaging and has provided remarkable results. Yet this technique presents several limitations, especially due to tissue autofluorescence under external illumination and weak tissue penetration of low wavelength excitation light. We have developed an alternative optical imaging technique by using persistent luminescent nanoparticles suitable for small animal imaging. These nanoparticles can be excited before injection, and their in vivo distribution can be followed in real-time for more than 1 h without the need for any external illumination source. Chemical modification of the nanoparticles' surface led to lung or liver targeting or to long-lasting blood circulation. Tumor mass could also be identified on a mouse model.

Mixed-metal MOFs are metal-organic frameworks that contain at least 2 different metal ions as nodes of their frameworks. They are prepared relatively easily by either a one-pot synthesis with a synthesis mixture containing the different metals, or by a post-synthetic ion-exchange method by soaking a monometallic MOF in a concentrated solution of a different (but compatible) metal-ion. More difficult is the accurate characterization of these materials. Is the formed product a mixture of monometallic MOFs or indeed a MOF with different metallic nodes? Are the metals randomly distributed or do they form domains? What is the oxidation state of the metals? How do the metals mutually influence each other, and impact the material's performance? Advanced characterization techniques are required e.g. X-ray absorption spectroscopy, magnetic resonance and electron microscopy. Computational tools at multiple scales are also often applied. In almost every case, a judicious choice of several techniques is required to unambiguously characterize the mixed-metal MOF. Although still in their infancy, several applications are emerging for mixed-metal MOFs, that improve on conventional monometallic MOFs. In the field of gas sorption and storage, especially the stability and affinity towards the target gases can be largely improved by introducing a second metal ion. In the case of flexible MOFs, the breathing behavior, and in particular the pressure at which the MOF opens, can be tailored. In heterogeneous catalysis, new cascade and tandem reactions become possible, with particular focus on reactions where the two metals in close proximity truly form a mixed-metal transition state. The bimetallic MOF should have a clear benefit over a mixture of the respective monometallic MOFs, and bimetallic enzymes can be a huge source of inspiration in this field. Another very promising application lies in the fields of luminescence and sensing. By tuning the lanthanide metals in mixed-metal lanthanide MOFs and by using the organic linkers as antennae, novel smart materials can be developed, acting as sensors and as thermochromic thermometers. Of course there are also still open challenges, as also mixed-metal MOFs do not escape the typical drawbacks of MOFs, such as low stability in moisture and possible metal leaching in liquids. The ease of synthesis of mixed-metal MOFs is a large bonus. In this critical review, we discuss in detail the synthesis, characterization, computational work and applications of mixed-metal MOFs.

International audience

A green method for epoxidation of imines using an environmentally benign oxidant system, H2O2/dimethyl carbonate, was developed. N-Alkyloxaziridines were prepared in high yields from N-alkylamines and (hetero)aromatic aldehydes in one-pot fashion, whereas N-sulfonyloxaziridines have been prepared by using the same oxidant system and 5 mol% of Zn(OAc)2·2H2O as catalyst.

Sickle cell disease results from a homozygous missense mutation in the -globin gene that causes polymerization of hemoglobin S. Gene therapy for patients with this disorder is complicated by the complex cellular abnormalities and challenges in achieving effective, persistent inhibition of polymerization of hemoglobin S. We describe our first patient treated with lentiviral vector-mediated addition of an antisickling -globin gene into autologous hematopoietic stem cells. Adverse events were consistent with busulfan conditioning. Fifteen months after treatment, the level of therapeutic antisickling -globin remained high (approximately 50% of -like-globin chains) without recurrence of sickle crises and with correction of the biologic hallmarks of the disease. (Funded by Bluebird Bio and others; HGB-205 ClinicalTrials.gov number, NCT02151526.) S ickle cell disease is among the most prevalent inherited monogenic disorders. Approximately 90,000 people in the United States have sickle cell disease, and worldwide more than 275,000 infants are born with the disease annually. 1,2 Sickle cell disease was the first disease for which the molecular basis was identified: a single amino acid substitution in "adult" A -globin (Glu6Val) stemming from a single base substitution (AT) in the first exon of the human A -globin gene (HBB) was discovered in 1956. Sickle hemoglobin (HbS) polymerizes on deoxygenation, reducing the deformability of red cells. Patients have intensely painful vaso-occlusive crises, leading to irreversible organ damage, poor quality of life, and reduced life expectancy. Hydroxyurea, a cytotoxic agent that is capable of boosting fetal hemoglobin levels in some patients, is the only disease-modifying therapy approved for sickle cell disease. llogeneic hematopoietic stem-cell transplantation currently offers the only curative option for patients with severe sickle cell disease. However, fewer than 18% of patients have access to a matched sibling donor. Therapeutic ex vivo gene transfer into autologous hematopoietic stem cells, referred to here as gene therapy, may provide a long-term and potentially curative treatment for sickle cell disease. e previously reported proof of effective, sustained gene therapy in mouse mod-

In the past few years, numerous studies have demonstrated the great potential of nano particles of metal-organic frameworks (nanoMOFs) at the preclinical level for biomedical applications. Many of them were reported very recently based on their bioactive composition, anticancer application, or from a general drug delivery/theranostic perspective. In this review, the authors aim at providing a global view of the studies that evaluated MOFs' biomedical applications at the preclinical stage, when in vivo tests are described either for pharmacological applications or for toxicity evaluation. The authors first describe the current surface engineering approaches that are crucial to understand the in vivo behavior of the nanoMOFs. Finally, after a detailed and comprehensive analysis of the in vivo studies reported with MOFs so far, and considering the general evolution of the drug delivery science, the authors suggest new directions for future research in the use of nanoMOFs for biomedical applications.

International audience