CSIR National Physical Laboratory of India

autophagic responses. Here, we critically discuss current methods of assessing autophagy and the information they can, or cannot, provide. Our ultimate goal is to encourage intellectual and technical innovation in the field.

Graphene quantum dots (GQDs), which are edge-bound nanometer-size graphene pieces, have fascinating optical and electronic properties. These have been synthesized either by nanolithography or from starting materials such as graphene oxide (GO) by the chemical breakdown of their extended planar structure, both of which are multistep tedious processes. Here, we report that during the acid treatment and chemical exfoliation of traditional pitch-based carbon fibers, that are both cheap and commercially available, the stacked graphitic submicrometer domains of the fibers are easily broken down, leading to the creation of GQDs with different size distribution in scalable amounts. The as-produced GQDs, in the size range of 1-4 nm, show two-dimensional morphology, most of which present zigzag edge structure, and are 1-3 atomic layers thick. The photoluminescence of the GQDs can be tailored through varying the size of the GQDs by changing process parameters. Due to the luminescence stability, nanosecond lifetime, biocompatibility, low toxicity, and high water solubility, these GQDs are demonstrated to be excellent probes for high contrast bioimaging and biosensing applications.

Every year, from December to April, anthropogenic haze spreads over most of the North Indian Ocean, and South and Southeast Asia. The Indian Ocean Experiment (INDOEX) documented this Indo‐Asian haze at scales ranging from individual particles to its contribution to the regional climate forcing. This study integrates the multiplatform observations (satellites, aircraft, ships, surface stations, and balloons) with one‐ and four‐dimensional models to derive the regional aerosol forcing resulting from the direct, the semidirect and the two indirect effects. The haze particles consisted of several inorganic and carbonaceous species, including absorbing black carbon clusters, fly ash, and mineral dust. The most striking result was the large loading of aerosols over most of the South Asian region and the North Indian Ocean. The January to March 1999 visible optical depths were about 0.5 over most of the continent and reached values as large as 0.2 over the equatorial Indian ocean due to long‐range transport. The aerosol layer extended as high as 3 km. Black carbon contributed about 14% to the fine particle mass and 11% to the visible optical depth. The single‐scattering albedo estimated by several independent methods was consistently around 0.9 both inland and over the open ocean. Anthropogenic sources contributed as much as 80% (±10%) to the aerosol loading and the optical depth. The in situ data, which clearly support the existence of the first indirect effect (increased aerosol concentration producing more cloud drops with smaller effective radii), are used to develop a composite indirect effect scheme. The Indo‐Asian aerosols impact the radiative forcing through a complex set of heating (positive forcing) and cooling (negative forcing) processes. Clouds and black carbon emerge as the major players. The dominant factor, however, is the large negative forcing (‐20±4 W m−2) at the surface and the comparably large atmospheric heating. Regionally, the absorbing haze decreased the surface solar radiation by an amount comparable to 50% of the total ocean heat flux and nearly doubled the lower tropospheric solar heating. We demonstrate with a general circulation model how this additional heating significantly perturbs the tropical rainfall patterns and the hydrological cycle with implications to global climate.

Solution-processed small-molecule p-DTS(FBTTh2)2:PC71BM bulk heterojunction (BHJ) solar cells with power conversion efficiency of 8.01% are demonstrated. The fill factor (FF) is sensitive to the thickness of a calcium layer between the BHJ layer and the Al cathode; for 20 nm Ca thickness, the FF is 73%, the highest value reported for an organic solar cell. The maximum external quantum efficiency exceeds 80%. After correcting for the total absorption in the cell through normal incidence reflectance measurements, the internal quantum efficiency approaches 100% in the spectral range of 600-650 nm and well over 80% across the entire spectral range from 400 to 700 nm. Analysis of the current-voltage (J-V) characteristics at various light intensities provides information on the different recombination mechanisms in the BHJ solar cells with different thicknesses of the Ca layer. Our analysis reveals that the J-V curves are dominated by first-order recombination from the short-circuit condition to the maximum power point and evolve to bimolecular recombination in the range of voltage from the maximum power point to the open-circuit condition in the optimized device with a Ca thickness of 20 nm. In addition, the normalized photocurrent density curves reveal that the charge collection probability remains high; about 90% of charges are collected even at the maximum power point. The dominance of bimolecular recombination only when approaching open circuit, the lack of Shockley-Read-Hall recombination at open circuit, and the high charge collection probability (97.6% at the short circuit and constant over wide range of applied voltage) lead to the high fill factor.

Recent research in organic photovoltaic (OPV) is largely focused on developing low cost OPV materials such as graphene. However, graphene sheets (GSs) blended conjugated polymers are known to show inferior OPV characteristics as compared to fullerene adduct blended with conjugated polymer. Here, we demonstrate that graphene quantum dots blended with regioregular poly(3-hexylthiophene-2,5-diyl) or poly(2-methoxy-5-(2-ethylhexyloxy)-1,4phenylenevinylene) polymer results in a significant improvement in the OPV characteristics as compared to GSs blended conjugated polymers. This work has implications for inexpensive and efficient solar cells as well as organic light emitting diodes.

The Indian Ocean Experiment (INDOEX) was an international, multiplatform field campaign to measure long-range transport of air pollution from South and Southeast Asia toward the Indian Ocean during the dry monsoon season in January to March 1999. Surprisingly high pollution levels were observed over the entire northern Indian Ocean toward the Intertropical Convergence Zone at about 6 degrees S. We show that agricultural burning and especially biofuel use enhance carbon monoxide concentrations. Fossil fuel combustion and biomass burning cause a high aerosol loading. The growing pollution in this region gives rise to extensive air quality degradation with local, regional, and global implications, including a reduction of the oxidizing power of the atmosphere.

Copper indium gallium selenide (CIGS) based solar cells are receiving worldwide attention for solar power generation.

The development of high-performance shielding materials against electromagnetic pollution requires mobile charge carriers and magnetic dipoles. Herein, we meet the challenge by building a three-dimensional (3D) nanostructure consisting of chemically modified graphene/Fe3O4(GF) incorporated polyaniline. Intercalated GF was synthesized by the in situ generation of Fe3O4 nanoparticles in a graphene oxide suspension followed by hydrazine reduction, and further in situ polymerization with aniline to form a polyaniline composite. Spectroscopic analysis demonstrates that the presence of GF hybrid structures facilitates strong polarization due to the formation of a solid-state charge-transfer complex between graphene and polyaniline. This provides proper impedance matching and higher dipole interaction, which leads to the high microwave absorption properties. The higher dielectric loss (ε'' = 30) and magnetic loss (μ'' = 0.2) contribute to the microwave absorption value of 26 dB (>99.7% attenuation), which was found to depend on the concentration of GF in the polyaniline matrix. Moreover, the interactions between Fe3O4, graphene and polyaniline are responsible for superior material characteristics, such as excellent environmental (chemical and thermal) degradation stability and good electric conductivity (as high as 260 S m(-1)).

Nanospacers for graphene: A facile and scalable process for the synthesis of aqueous solutions of isolated silver-decorated graphene sheets (see image) is presented. The silver–graphene nanocomposite film shows a 109-fold increase in electrical conductivity as compared to the graphite oxide film.

Counterfeiting of valuable documents, currency and branded products is a challenging problem that has serious economic, security and health ramifications for governments, businesses and consumers all over the world. It is estimated that counterfeiting represents a multi-billion dollar underground economy with counterfeit products being produced on a large scale every year. Counterfeiting is an increasingly high-tech crime and calls for high-tech solutions to prevent and deter the acts of counterfeiting. The present review briefly outlines and addresses the key challenges in this area, including the above mentioned concerns for anti-counterfeiting applications. This article describes a unique combination of all possible kinds of security ink formulations based on lanthanide doped luminescent nanomaterials, quantum dots (semiconductor and carbon based), metal organic frameworks as well as plasmonic nanomaterials for their possible use in anti-counterfeiting applications. Moreover, in this review, we have briefly discussed and described the historical background of luminescent nanomaterials, basic concepts and detailed synthesis methods along with their characterization. Furthermore, we have also discussed the methods adopted for the fabrication and design of luminescent security inks, various security printing techniques and their anti-counterfeiting applications.

We successfully demonstrate inverted structure small-molecule (SM) solar cells with an efficiency of 7.88% using ZnO and PEIE as an interfacial layer. Modification of ZnO with a cost-effective PEIE thin layer increases the efficiency of the inverted cell as a result of reducing the work function of the cathode and suppressing the trap-assisted recombination. In addition to the high efficiency, the inverted SM solar cells are relatively stable in air compared to conventional cells.

Recent increase in energy demand and associated environmental degradation concern has triggered more research towards alternative green energy sources. Eco-friendly energy in facile way has been generated from abundantly available iron oxides using only few microliters of water without any external energy source. Hydroelectric cell (HEC) compatible to environment benign, low cost oxygen-deficient mesoporous hematite nanoparticles has been used for splitting water molecules spontaneously to generate green electricity. Hematite nanoparticles have been synthesized by coprecipitation method. Chemidissociated hydroxyl group presence on hematite surface has been confirmed by infrared spectroscopy (IR) and X-ray photoelectron spectroscopy (XPS). Surface oxygen vacancies in nanostructured hematite have been identified by transmission electron microscopy (TEM), XPS, and photoluminescence (PL) measurement. Hematite-based HEC delivers 30 mA current with 0.92 V emf using approximately 500 μL water. Maximum off-load output power 27.6 mW delivered by 4.84 cm2 area hematite-based HEC is 3.52 times higher than reported 7.84 mW power generated by Li-magnesium ferrite HEC. Electrochemistry of HEC in different irreversible polarization loss regions has been estimated by applying empirical modeling on V-I polarization curve revealing the reaction and charge transport mechanism of cell. Tafel slope 22.7 mV has been calculated by modeling of activation polarization overvoltage region of 0.11 V. Low activation polarization indicated easy charge/ion diffusion and faster reaction kinetics of Ag/Zn electrode owing to lesser energy barrier at interface. Dissociated H3O+ ions diffuse through surface via proton hopping, while OH− ions migrate through interconnected defective crystallite boundaries resulting into high output cell current.

We report Barium (Ba) cathode layer for bulk-heterojunction solar cells which enhanced the fill factor (FF) of p-DTS(FBTTh2)2/PC71BM BHJ solar cell up to 75.1%, one of the highest value reported for an organic solar cell. The external quantum efficiency exceeds 80%. Analysis of recombination mechanisms using the current-voltage (J-V) characteristics at various light intensities in the BHJ solar cell layer reveals that Ba prevents trap assisted Shockley-Read-Hall (SRH) recombination at the interface and with different thicknesses of the Ba, the recombination shifts towards bimolecular from monomolecular. Moreover, Ba increases shunt resistance and decreases the series resistance significantly. This results in an increase in the charge collection probability leading to high FF. This work identifies a new cathode interlayer which outclasses the all the reported interlayers in increasing FF leading to high power conversion efficiency and have significant implications in improving the performance of BHJ solar cells.

The present paper reports the complex permittivity, permeability, and microwave absorption properties of core shell type poly (3,4-ethylenedioxy thiophene) (PEDOT) nanocomposite with barium ferrite, synthesized by in situ emulsion polymerization, in the 12.4-18 GHz frequency range. High-resolution transmission electron microscopy (HRTEM) studies reveal the formation of core-shell type morphology with ferrite particles (60-80 nm) as the center while the polymer (PEDOT) formulates the outer shell of the composite. The presence of barium ferrite nanoparticles in the polymer matrix includes the magnetic losses, which mainly arise from the magnetic hysteresis, domain-wall displacement, and eddy current loss. The higher dielectric (epsilon'' = 23.5) and magnetic loss (micro'' = 0.22) contributes to the microwave absorption value of 22.5 dB (>99% attenuation) and are found to increase with the amount of ferrite constituents. The polymer was further characterized through Fourier transform infrared spectroscopy (FTIR), energy dispersive X-ray spectroscopy (EDS), and X-ray diffraction (XRD).

Composite absorbers based on conducting fabrics possessing moderate conductivity and dielectric/magnetic properties were prepared by in situ incorporation of nanoparticles of BaTiO 3 (15–25 nm) or Fe 3 O 4 (25–40 nm) within coated poly(aniline) (PANI) matrix. The X-ray diffraction patterns and transmission electron microscopy images confirmed the formation of PANI coating and incorporation of BaTiO 3 or Fe 3 O 4 nanoparticles. Scanning electron microscopy images show formation of thick and uniform coating of PANI over individual fibers and in interweave regions. The dielectric studies show that incorporation of BaTiO 3 lead to enhancement of dielectric properties of PANI whereas magnetization measurements revealed that incorporation of Fe 3 O 4 resulted in noticeable improvement in magnetic properties with saturation magnetization of 17.9 emu/g. The Ku-band (12.4–18.0 GHz) shielding studies revealed that pure PANI-coated fabric show total shielding effectiveness (SE T ) of −15.3 dB which enhanced to −16.8 and −19.4 dB after incorporation of BaTiO 3 and Fe 3 O 4 nanoparticles respectively. Such an improvement can be attributed to the better matching of input impedance, reduction of skin depth, and additional dielectric/magnetic losses. The high value of absorption-dominated SE T (i.e., 97–99% attenuation) and specific shielding effectiveness value of 17–20 dB cm 3 /g demonstrate the potential of these fabrics as promising microwave-shielding material. In addition, these fabrics also display good antistatic response with static charge decay time of only 0.11 s.

Abstract Multiferroic materials have attracted considerable attention as possible candidates for a wide variety of future microelectronic and memory devices, although robust magnetoelectric (ME) coupling between electric and magnetic orders at room temperature still remains difficult to achieve. In order to obtain robust ME coupling at room temperature, we studied the Pb(Fe0.5Nb0.5)O3/Ni0.65Zn0.35Fe2O4/Pb(Fe0.5Nb0.5)O3 (PFN/NZFO/PFN) trilayer structure as a representative FE/FM/FE system. We report the ferroelectric, magnetic and ME properties of PFN/NZFO/PFN trilayer nanoscale heterostructure having dimensions 70/20/70 nm, at room temperature. The presence of only (00l) reflection of PFN and NZFO in the X-ray diffraction (XRD) patterns and electron diffraction patterns in Transmission Electron Microscopy (TEM) confirm the epitaxial growth of multilayer heterostructure. The distribution of the ferroelectric loop area in a wide area has been studied, suggesting that spatial variability of ferroelectric switching behavior is low, and film growth is of high quality. The ferroelectric and magnetic phase transitions of these heterostructures have been found at ~575 K and ~650 K, respectively which are well above room temperature. These nanostructures exhibit low loss tangent, large saturation polarization (Ps ~ 38 µC/cm2) and magnetization (Ms ~ 48 emu/cm3) with strong ME coupling at room temperature revealing them as potential candidates for nanoscale multifunctional and spintronics device applications.

Abstract Aerosol emissions from biomass burning are of specific interest over the globe due to their strong radiative impacts and climate implications. The present study examines the impact of paddy crop residue burning over northern India during the postmonsoon (October–November) season of 2012 on modification of aerosol properties, as well as the long‐range transport of smoke plumes, altitude characteristics, and affected areas via the synergy of ground‐based measurements and satellite observations. During this period, Moderate Resolution Imaging Spectroradiometer (MODIS) images show a thick smoke/hazy aerosol layer below 2–2.5 km in the atmosphere covering nearly the whole Indo‐Gangetic Plains (IGP). The air mass trajectories originating from the biomass‐burning source region over Punjab at 500 m reveal a potential aerosol transport pathway along the Ganges valley from west to east, resulting in a strong aerosol optical depth (AOD) gradient. Sometimes, depending upon the wind direction and meteorological conditions, the plumes also influence central India, the Arabian Sea, and the Bay of Bengal, thus contributing to Asian pollution outflow. The increased number of fire counts (Terra and Aqua MODIS data) is associated with severe aerosol‐laden atmospheres (AOD 500 nm > 1.0) over six IGP locations, high values of Ångström exponent (>1.2), high particulate mass 2.5 (PM 2.5 ) concentrations (>100–150 µgm −3 ), and enhanced Ozone Monitoring Instrument Aerosol Index gradient (~2.5) and NO 2 concentrations (~6 × 10 15 mol/cm 2 ), indicating the dominance of smoke aerosols from agricultural crop residue burning. The aerosol size distribution is shifted toward the fine‐mode fraction, also exhibiting an increase in the radius of fine aerosols due to coagulation processes in a highly turbid environment. The spectral variation of the single‐scattering albedo reveals enhanced dominance of moderately absorbing aerosols, while the aerosol properties, modification, and mixing atmospheric processes differentiate along the IGP sites depending on the distance from the aerosol source, urban influence, and local characteristics.

The annealing effect on the structural perfection of Fe-doped LiNbO3single crystals has been studied by high-resolution X-ray diffractometry (HRXRD), X-ray topography (XRT) and Fourier transform infrared (FT–IR) spectroscopy. The single crystals, prepared by mixing Li2CO3and Nb2O5powders in the molar ratio 48.6:51.4 with 0.05 mol% of iron at 1415 (1) K, were grown by the Czochralski (CZ) method along the [001] direction in air and poled during crystal growth by the application of a DC field. Two low-angle (tilt angle ∼1 arc minute) structural grain boundaries were observed in as-grown specimens. FT–IR spectra revealed that these crystals contain OH−and CO32−ionic defects. Grain boundaries and CO32−ionic defects were successfully removed, while the concentration of OH−ions was considerably reduced by post-growth thermal annealing at elevated temperatures.

M\"ossbauer studies combined with magnetic-susceptibility data on well-characterized LaCo${\mathrm{O}}_{3}$ in the 4.2-1200-K region show that cobalt ions exist predominantly in the low-spin ${\mathrm{Co}}^{\mathrm{III}}$ state at low temperatures which transform partially to high-spin ${\mathrm{Co}}^{3+}$ ions up to 200 K. Above 200 K, ${\mathrm{Co}}^{3+}$ and ${\mathrm{Co}}^{\mathrm{III}}$ ion pairs transform to ${\mathrm{Co}}^{\mathrm{II}}$ and ${\mathrm{Co}}^{4+}$ pairs. At high temperatures, the population of ${\mathrm{Co}}^{3+}$ decreases significantly and completely disappears at the localized-electron-collective-electron transition temperature at 1210 K. The variations of the Lamb-M\"ossbauer factor and the center shift with temperature provide valuable information on the high-spin-low-spin equilibria, as well as on the nature of the phase transitions and symmetry changes in LaCo${\mathrm{O}}_{3}$. All these changes are reflected in the transport properties of LaCo${\mathrm{O}}_{3}$. There appears to be little doubt that the first-order localized-electron-collective-electron transition in LaCo${\mathrm{O}}_{3}$ is caused essentially by the change in entropy of the $d$ electrons.

Acid modified multiwalled carbon nanotubes (a-MWCNT) reinforced polyurethane (PU) composite films have been fabricated using a solvent casting technique with 0–10 wt% of a-MWCNTs. A nanoindentation study has been carried out on these films in order to investigate the mechanical properties. Incorporation of a-MWCNTs in a PU matrix led to a drastic increase in the hardness and elastic modulus. The maximum nanoindentation hardness of 217.5 MPa for 10 wt% a-MWCNT loading was observed as compared to 58.5 MPa for pure PU (an overall improvement of 271%). The nanoindentation elastic modulus for a 10 wt% a-MWCNT loaded sample was 1504.2 MPa as compared to 385.7 MPa for pure PU (an overall improvement of 290%). In addition to hardness and elastic modulus, other mechanical properties i.e. plastic index parameter, elastic recovery, ratio of residual displacement after load removal and displacement at the maximum load and plastic deformation energy have also been investigated. The enhancement in the mechanical properties was correlated with spectroscopic and microscopic investigations using Raman spectroscopy, SEM and TEM. Dispersion of a-MWCNTs in the PU matrix was studied using Raman mapping. Besides the improvement in mechanical properties, the electromagnetic interference shielding properties were also investigated in the 8.2–12.4 GHz (X-band) frequency range. A value of ∼29 dB for the 10 wt% MWCNT loaded sample having a thickness of 1.5 mm was obtained. Therefore, these polyurethane composite films shall not only be useful for hard and scratchless coatings but also for protection from electromagnetic radiation in making electromagnetic shielding bags for packaging of electronic circuits and for scratchless tape for laminating circuit boards.