Dumlupinar University

By using the ATLAS detector, observations have been made of a centrality-dependent dijet asymmetry in the collisions of lead ions at the Large Hadron Collider. In a sample of lead-lead events with a per-nucleon center of mass energy of 2.76 TeV, selected with a minimum bias trigger, jets are reconstructed in fine-grained, longitudinally segmented electromagnetic and hadronic calorimeters. The transverse energies of dijets in opposite hemispheres are observed to become systematically more unbalanced with increasing event centrality leading to a large number of events which contain highly asymmetric dijets. This is the first observation of an enhancement of events with such large dijet asymmetries, not observed in proton-proton collisions, which may point to an interpretation in terms of strong jet energy loss in a hot, dense medium.

<h3>ABSTRACT</h3> Although a number of scholars have investigated effective celebrity endorser characteristics with consumer samples using experimental methods, there is only one study by Miciak and Shanklin (1994) that explored the point of view of practitioners who are responsible for the selection of celebrities. This paper investigates British advertising agency managers9 consideration of important celebrity characteristics when selecting an endorser and these factors9 importance according to product types. The research findings validate much of the consumer-based research in that managers consider a range of criteria when choosing celebrity endorsers and indicate that the importance of the criteria depends on the product type.

In a constantly changing and increasingly globalized world, religion still plays a significant role in influencing social and consumer behavior. This study will analyze what influence religion and intensity of belief has on attitudes towards the advertising of particular controversial products and services. A questionnaire was distributed to 1,393 people across six different countries and resulting in samples of four main religious groups. The results indicated some statistically significant differences between the groups, which can have important implications for global marketers.

CERN-LHC. Measurement of inclusive charged particle distributions in proton proton collisions at centre-of-mass energies 0.9, 2.36 and 7 TeV using a single-arm minimum-bias trigger. Distributions of charged particle multiplicity and its dependence on pseudorapidity and transverse momentum are presented from ~190 mub-1 of data at 7 Tev, ~7 mub-1 at 0.9 TeV, and ~0.1 mub-1 at 2.36 GeV. UPDATE 20/05/2016: A wrong point was removed from table 16.

The jet energy scale and its systematic uncertainty are determined for jets measured with the ATLAS detector at the LHC in proton-proton collision data at a centre-of-mass energy of s = 7 TeV corresponding to an integrated luminosity of 38 pb -1 . Jets are reconstructed with the anti-k t algorithm with distance parameters R = 0.4 or R = 0.6. Jet energy and angle corrections are determined from Monte Carlo simulations to calibrate jets with transverse momenta p T 20 GeV and pseudorapidities || < 4.5. The jet energy systematic uncertainty is estimated using the single isolated hadron response measured in situ and in test-beams, exploiting the transverse momentum balance between central and forward jets in events with dijet topologies and studying systematic variations in Monte Carlo simulations. The jet energy uncertainty is less than 2.5 % in the central calorimeter region (|| < 0.8) for jets with 60 p T < 800 GeV, and is maximally 14 % for p T < 30 GeV in the most forward region 3.2 || < 4.5. The jet energy is validated for jet transverse momenta up to 1 TeV to the level of a few percent using several in situ techniques by comparing a well-known reference such as the recoiling photon p T , the sum of the transverse momenta of tracks associated to the jet, or a system of low-p T jets recoiling against a high-p T jet. More sophisticated jet calibration schemes are presented based on calorimeter cell energy density weighting or hadronic properties of jets, aiming for an improved jet energy resolution and a reduced flavour dependence of the jet response. The systematic uncertainty of the jet energy determined from a combination of in situ techniques is consistent with the one derived from single hadron response measurements over a wide kinematic range. The nominal corrections and uncertainties are derived for isolated jets in an inclusive sample of high-p T jets. Special cases such as event topologies with close-by jets, or selections of samples with an enhanced content of jets originating e-mail: atlas.publications

A bstract The discovery by the ATLAS and CMS experiments of a new boson with mass around 125 GeV and with measured properties compatible with those of a Standard-Model Higgs boson, coupled with the absence of discoveries of phenomena beyond the Standard Model at the TeV scale, has triggered interest in ideas for future Higgs factories. A new circular e + e − collider hosted in a 80 to 100 km tunnel, TLEP, is among the most attractive solutions proposed so far. It has a clean experimental environment, produces high luminosity for top-quark, Higgs boson, W and Z studies, accommodates multiple detectors, and can reach energies up to the $$ \mathrm{t}\overline{\mathrm{t}} $$ threshold and beyond. It will enable measurements of the Higgs boson properties and of Electroweak Symmetry-Breaking (EWSB) parameters with unequalled precision, offering exploration of physics beyond the Standard Model in the multi-TeV range. Moreover, being the natural precursor of the VHE-LHC, a 100 TeV hadron machine in the same tunnel, it builds up a long-term vision for particle physics. Altogether, the combination of TLEP and the VHE-LHC offers, for a great cost effectiveness, the best precision and the best search reach of all options presently on the market. This paper presents a first appraisal of the salient features of the TLEP physics potential, to serve as a baseline for a more extensive design study.

The objective was to evaluate the prevalence of dysmenorrhea and determine its effect on health-related quality of life (HRQoL) among a group of female university students. This cross-sectional study was conducted between 15 March and 15 April 2009 at Dumlupinar University, Kutahya, Health High School, Western Turkey. The study group included 623 female students. The severity of dysmenorrhea was determined with a 10-point visual analog scale. The Short Form-36 (SF-36) form was used to determinate HRQoL. Chi-square test, Student's t test, and logistic regression and variance analyses (ANOVA) were used for statistical analyses. The average age of the study group was 20.8 +/- 1.8 years (range 17-30). Prevalence of dysmenorrhea was found to be 72.7% and was significantly higher in coffee consumers, females with menstrual bleeding duration > or =7 days, and those who had a positive family history of dysmenorrhea when compared to the others (P < 0.05, for each one). By multivariate analysis, coffee consumption (OR 2.084), menstrual bleeding duration > or =7 days (OR 1.590), and positive family history of dysmenorrhea (OR 3.043) were important risk factors for dysmenorrhea. Except for social functioning, role-emotional, and mental health domains, the SF-36 points received from the other domains were higher in females with dysmenorrhea (for each one P < 0.05). With the exception of the scores received from physical functioning and role-emotional domains, the scores received from the other domains of the SF-36 scale showed a decrease with increasing severity of dysmenorrhea (P < 0.05, for each one). Dysmenorrhea is a common health problem, having negative effects on the HRQoL among university female students.

Detailed measurements of the electron performance of the ATLAS detector at the LHC are reported, using decays of the Z, W and J / particles. Data collected in 2010 at s = 7 TeV are used, corresponding to an integrated luminosity of almost 40 pb -1 . The inter-alignment of the inner detector and the electromagnetic calorimeter, the determination of the electron energy scale and resolution, and the performance in terms of response uniformity and linearity are discussed. The electron identification, reconstruction and trigger efficiencies, as well as the charge misidentification probability, are also presented.

The purpose of this study is to analyze the relationship between the intellectual capital performance and financial performance of 44 banks operating in Turkey between 2005 and 2014. The intellectual capital performance of banks is measured through the value added intellectual coefficient (VAIC) methodology. The intellectual capital performance of the Turkish banking sector is generally affected by human capital efficiency (HCE). In terms of bank types, development and investment banks have the highest average VAIC. When VAIC is divided into its components, it can be observed that capital employed efficiency (CEE) and human capital efficiency (HCE) positively affect the financial performance of banks. However, CEE has more influence on the financial performance of banks compared to HCE. Therefore, banks operating in the Turkish banking sector should use their financial and physical capitals if they wish to reach a higher profitability level.

The measurement of missing transverse momentum in the ATLAS detector, described in this paper, makes use of the full event reconstruction and a calibration based on reconstructed physics objects. The performance of the missing transverse momentum reconstruction is evaluated using data collected in pp collisions at a centre-of-mass energy of 7 TeV in 2010. Minimum bias events and events with jets of hadrons are used from data samples corresponding to an integrated luminosity of about 0.3 nb -1 and 600 nb -1 respectively, together with events containing a Z boson decaying to two leptons (electrons or muons) or a W boson decaying to a lepton (electron or muon) and a neutrino, from a data sample corresponding to an integrated luminosity of about 36 pb -1 . An estimate of the systematic uncertainty on the missing transverse momentum scale is presented.

This paper presented the Turkish version of the Depression Anxiety Stress Scale-21 (DASS-21) in community and clinical samples, examined its psychometric properties. Construct validity and concurrent validity were conducted in validity studies. Depression Anxiety Stress Scale-42 (DASS-42) was used for concurrent validity. In reliability analysis, the instruments internal consistency and re-test reliability were studied. Results of explanatory factor analyses demonstrated that 21 items yielded three-factors. Results of confirmatory factor analyses for three-dimensional model showed that acceptable fit index values in community sample and perfect fit index values in clinical sample. Factor loadings ranged from .42 to .72. In the concurrent validity, significant positive relationships were found between DASS-42 and DASS-21. Cronbach alpha internal consistency coefficient was found as &#945;= .87 for depression sub-scale, &#945;= .85 for anxiety sub-scale and &#945;= .81 for stress sub-scale in clinical sample. Moreover, test-retest reliability coefficient was obtained as r=.68 for depression sub-scale, r=.66 for anxiety sub-scale and r=.61 for stress sub-scale in community sample, and corrected item-total correlations ranged from .43 to .77 in clinical sample. In second study, DASS-21 discriminated the patients (depression mean score=10.83; anxiety mean score=10.39; stress mean score=11.85) from the healthy subjects (depression mean score=5.88; anxiety mean score=5.37; stress mean score=7.90) well (U=5310.50; 4748.50; 5562.50, p=0.00). According to psychometric properties, DASS-21 is a reliable and valid instrument in the assessment of depression, anxiety, stress levels. [JCBPR 2018; 7(1.000): 19-30]

The current study investigates the perspectives and experiences of teachers regarding their school principal’s digital leadership roles and technology capabilities during the COVID-19 pandemic. The research was conducted using a case study-based qualitative approach, and with a study group consisting of 89 teachers holding a Master’s degree. Maximum diversity sampling, one of the purposive sampling methods, was preferred in the determination of the study group, and the data obtained from the research were analyzed through content analysis. The five main themes determined based on the perceptions and experiences of the participants are listed as: “Digital technology usage, support for the digital transformation, support for technology-based professional development, support for digital learning culture, and digital leadership skills”. The results of the research revealed that the level of use of digital technologies by school principals during the COVID-19 pandemic was perceived as adequate by teachers. In addition, it was determined that school principals support digital transformation and technology-based professional development in schools. Furthermore, within the scope of the research, it was determined that school principals contribute to the construction of a digital learning culture in schools. The results of the study revealed that school principals’ digital leadership skills were clustered under three categories: technology use, managerial skills, and individual skills. As a result, in order to realize digital transformation within the context of K-12 education, school principals must first demonstrate their digital leadership and actively support the establishment of a digital learning culture in their schools.

A highly sensitive electrocatalytic sensor was designed and fabricated by the incorporation of NiO dope Pt nanostructure hybrid (NiO-Pt-H) as conductive mediator, bis (1,10 phenanthroline) (1,10-phenanthroline-5,6-dione) nickel(II) hexafluorophosphate (B,1,10,P,1,10, PDNiPF6), and electrocatalyst into carbon paste electrode (CPE) matrix for the determination of cysteamine. The NiO-Pt-H was synthesized by one-pot synthesis strategy and characterized by XRD, elemental mapping analysis (MAP), and FESEM methods. The characterization data, which confirmed good purity and spherical shape with a diameter of ⁓ 30.64 nm for the synthesized NiO-Pt-H. NiO-Pt-H/B,1,10, P,1,10, PDNiPF6/CPE, showed an excellent catalytic activity and was used as a powerful tool for the determination of cysteamine in the presence of serotonin. The NiO-Pt-H/B,1,10, P,1,10, PDNiPF6/CPE was able to solve the overlap problem of the two drug signals and was used for the determination of cysteamine and serotonin in concentration ranges of 0.003-200 µM and 0.5-260 µM with detection limits of 0.5 nM and 0.1 µM, using square wave voltammetric method, respectively. The NiO-Pt-H/B,1,10,P,1,10,PDNiPF6/CPE showed a high-performance ability for the determination of cysteamine and serotonin in the drug and pharmaceutical serum samples with the recovery data of 98.1-103.06%.

In this study, the energy situation of the world and the development of renewable energy were evaluated in the 10-year period covering the years 2012–2021. The share of renewable energy in electricity production and primary renewable energy consumption was assessed, and its development over the years was interpreted. The interest in renewable energy has been increasing regularly over the years. By evaluating the world energy data, it has been observed that renewable energy's installed power and consumption have increased significantly in the determined period. Renewable energy is of great importance for sustainable development. However, even today, fossil fuels have the highest share in primary energy consumption. In addition, the use and consumption of renewable energy worldwide are regularly increasing. While 0.24 Gtoe of the world's primary energy consumption was met from renewable energy sources in 2012, this value increased to 0.95 Gtoe in 2021. Also, approximately 7.4% of the total electricity production in the world was met from renewable energy in 2016; this rate increased to 12.8% in 2021. While the use of renewable energy is more intense in EU countries compared to other parts of the world, it is observed that the use of renewable energy is widespread in other parts of the world.

The production cross sections of the inclusive Drell-Yan processes W AE ! ' and Z= ! '' (' e, ) are measured in proton-proton collisions at ffiffi ffi s p 7 TeV with the ATLAS detector. The cross sections are reported integrated over a fiducial kinematic range, extrapolated to the full range, and also evaluated differentially as a function of the W decay lepton pseudorapidity and the Z boson rapidity, respectively. Based on an integrated luminosity of about 35 pb 1 collected in 2010, the precision of these measurements reaches a few percent. The integrated and the differential W AE and Z= cross sections in the e and channels are combined, and compared with perturbative QCD calculations, based on a number of different parton distribution sets available at next-to-next-to-leading order.

PURPOSE: Evaluation of ocular surface disease index (OSDI) questionnaire for the diagnosis of dry eye syndrome. METHODS: Sixty-eight patients admitted to the Ophthalmology Polyclinic of the Dumlupinar University between December 2005 and April 2006 were randomly studied. The OSDI questionnaire was performed before, and the Schirmer and tear film breakup time (TBUT) tests were performed after the routine ophthalmologic examination. RESULTS: There was a significant inverse correlation between the OSDI and TBUT test scores, but no correlation between the Schirmer test scores and OSDI (r = -.296, p = .014, r = -.182, p = .138, respectively). Although there was a significant difference between the low and high OSDI having cases according to the TBUT test scores (p = .043), there was not according to the Schirmer test scores. CONCLUSIONS: The OSDI is a standardized instrument to evaluate symptoms, and can easily be performed and used to support the diagnosis of dry eye syndrome.

Abstract The Large Hadron–Electron Collider (LHeC) is designed to move the field of deep inelastic scattering (DIS) to the energy and intensity frontier of particle physics. Exploiting energy-recovery technology, it collides a novel, intense electron beam with a proton or ion beam from the High-Luminosity Large Hadron Collider (HL-LHC). The accelerator and interaction region are designed for concurrent electron–proton and proton–proton operations. This report represents an update to the LHeC’s conceptual design report (CDR), published in 2012. It comprises new results on the parton structure of the proton and heavier nuclei, QCD dynamics, and electroweak and top-quark physics. It is shown how the LHeC will open a new chapter of nuclear particle physics by extending the accessible kinematic range of lepton–nucleus scattering by several orders of magnitude. Due to its enhanced luminosity and large energy and the cleanliness of the final hadronic states, the LHeC has a strong Higgs physics programme and its own discovery potential for new physics. Building on the 2012 CDR, this report contains a detailed updated design for the energy-recovery electron linac (ERL), including a new lattice, magnet and superconducting radio-frequency technology, and further components. Challenges of energy recovery are described, and the lower-energy, high-current, three-turn ERL facility, PERLE at Orsay, is presented, which uses the LHeC characteristics serving as a development facility for the design and operation of the LHeC. An updated detector design is presented corresponding to the acceptance, resolution, and calibration goals that arise from the Higgs and parton-density-function physics programmes. This paper also presents novel results for the Future Circular Collider in electron–hadron (FCC-eh) mode, which utilises the same ERL technology to further extend the reach of DIS to even higher centre-of-mass energies.

A search for the standard model Higgs boson is performed in the diphoton decay channel. The data used correspond to an integrated luminosity of 4.9 fb(-1) collected with the ATLAS detector at the Large Hadron Collider in proton-proton collisions at a center-of-mass energy of √s=7 TeV. In the diphoton mass range 110-150 GeV, the largest excess with respect to the background-only hypothesis is observed at 126.5 GeV, with a local significance of 2.8 standard deviations. Taking the look-elsewhere effect into account in the range 110-150 GeV, this significance becomes 1.5 standard deviations. The standard model Higgs boson is excluded at 95% confidence level in the mass ranges of 113-115 GeV and 134.5-136 GeV.

Piezoelectricity is a unique material property that allows one to convert mechanical energy into electrical one or vice versa. Transition metal dichalcogenides (TMDC) and transition metal dioxides (TMDO) are expected to have great potential for piezoelectric device applications due to their noncentrosymmetric and two-dimensional crystal structure. A detailed theoretical investigation of the piezoelectric stress (e11) and piezoelectric strain (d11) coefficients of single layer TMDCs and TMDOs with chemical formula MX2 (where M= Cr, Mo, W, Ti, Zr, Hf, Sn and X = O, S, Se, Te) is presented by using first-principles calculations based on density functional theory. We predict that not only the Mo- and W-based members of this family but also the other materials with M= Cr, Ti, Zr and Sn exhibit highly promising piezoelectric properties. CrTe2 has the largest e11 and d11 coefficients among the group VI elements (i.e., Cr, Mo, and W). In addition, the relaxed-ion e11 and d11 coefficients of SnS2 are almost the same as those of CrTe2. Furthermore, TiO2 and ZrO2 pose comparable or even larger e11 coefficients as compared to Mo- and W-based TMDCs and TMDOs. Our calculations reveal that TMDC and TMDO structures are strong candidates for future atomically thin piezoelectric applications such as transducers, sensors, and energy harvesting devices due to their piezoelectric coefficients that are comparable (even larger) to currently used bulk piezoelectric materials.

The dependence of the rate of proton–proton interactions on the centre-of-mass collision energy, √s, is of fundamental importance for both hadron collider physics and particle astrophysics. The dependence cannot yet be calculated from first principles; therefore, experimental measurements are needed. Here we present the first measurement of the inelastic proton–proton interaction cross-section at a centre-of-mass energy, √s, of 7 TeV using the ATLAS detector at the Large Hadron Collider. Events are selected by requiring hits on scintillation counters mounted in the forward region of the detector. An inelastic cross-section of 60.3±2.1 mb is measured for ξ>5×10−6, where ξ is calculated from the invariant mass, MX, of hadrons selected using the largest rapidity gap in the event. For diffractive events, this corresponds to requiring at least one of the dissociation masses to be larger than 15.7 GeV. The measurement of the total cross-section of proton–proton collisions is of fundamental importance for particle physics. Here, the first measurement of the inelastic cross-section is presented for proton–proton collisions at an energy of 7 teraelectronvolts using the ATLAS detector at the Large Hadron Collider.