Institut de Recherches sur la Catalyse et l'Environnement de Lyon

The ESC/ESH Guidelines represent the views of the ESC and ESH and were produced after careful consideration of the scientific and medical knowledge and the evidence available at the time of their dating. The ESC and ESH are not responsible in the event of any contradiction, discrepancy, and/or ambiguity between the ESC/ESH Guidelines and any other official

Abstract. Secondary organic aerosol (SOA) accounts for a significant fraction of ambient tropospheric aerosol and a detailed knowledge of the formation, properties and transformation of SOA is therefore required to evaluate its impact on atmospheric processes, climate and human health. The chemical and physical processes associated with SOA formation are complex and varied, and, despite considerable progress in recent years, a quantitative and predictive understanding of SOA formation does not exist and therefore represents a major research challenge in atmospheric science. This review begins with an update on the current state of knowledge on the global SOA budget and is followed by an overview of the atmospheric degradation mechanisms for SOA precursors, gas-particle partitioning theory and the analytical techniques used to determine the chemical composition of SOA. A survey of recent laboratory, field and modeling studies is also presented. The following topical and emerging issues are highlighted and discussed in detail: molecular characterization of biogenic SOA constituents, condensed phase reactions and oligomerization, the interaction of atmospheric organic components with sulfuric acid, the chemical and photochemical processing of organics in the atmospheric aqueous phase, aerosol formation from real plant emissions, interaction of atmospheric organic components with water, thermodynamics and mixtures in atmospheric models. Finally, the major challenges ahead in laboratory, field and modeling studies of SOA are discussed and recommendations for future research directions are proposed.

This critical review provides a survey illustrated by recent references of different strategies to achieve a sustainable conversion of biomass to bioproducts. Because of the huge number of chemical products that can be potentially manufactured, a selection of starting materials and targeted chemicals has been done. Also, thermochemical conversion processes such as biomass pyrolysis or gasification as well as the synthesis of biofuels were not considered. The synthesis of chemicals by conversion of platform molecules obtained by depolymerisation and fermentation of biopolymers is presently the most widely envisioned approach. Successful catalytic conversion of these building blocks into intermediates, specialties and fine chemicals will be examined. However, the platform molecule value chain is in competition with well-optimised, cost-effective synthesis routes from fossil resources to produce chemicals that have already a market. The literature covering alternative value chains whereby biopolymers are converted in one or few steps to functional materials will be analysed. This approach which does not require the use of isolated, pure chemicals is well adapted to produce high tonnage products, such as paper additives, paints, resins, foams, surfactants, lubricants, and plasticisers. Another objective of the review was to examine critically the green character of conversion processes because using renewables as raw materials does not exempt from abiding by green chemistry principles (368 references).

The role of metal-organic frameworks (MOFs) in the field of catalysis is discussed, and special focus is placed on their assets and limits in light of current challenges in catalysis and green chemistry. Their structural and dynamic features are presented in terms of catalytic functions along with how MOFs can be designed to bridge the gap between zeolites and enzymes. The contributions of MOFs to the field of catalysis are comprehensively reviewed and a list of catalytic candidates is given. The subject is presented from a multidisciplinary point of view covering solid-state chemistry, materials science, and catalysis.

EAU:BIOVERT+PGA:CPI

International audience

The theoretical description of charge distribution, and related properties, such as chemical reactivity descriptors of chemical compounds, has greatly benefited from the development of density functional theory (DFT) methods. Indeed, most concepts stemmed from DFT but, up to now, they have been used mostly within semiempirical MO methods, Hartree–Fock, or post-Hartree–Fock methods. During the last decade, however, DFT has enabled theoretical chemistry to predict accurately structures and energetics of clusters and molecules. Therefore, more attention should also now be paid to these reactivity descriptors determined directly from DFT calculations. In this work, chemical reactivity is explored in DFT through a functional Taylor expansion of energy that introduces various energy derivatives of chemical significance. This review summarizes their main features and examines the limitations of some indexes presently used for the characterization of reactivity. Also, several perspectives are given. © 1999 John Wiley & Sons, Inc. J Comput Chem 20: 129–154, 1999

This review article presents the fundamental and practical aspects of water adsorption in Metal-Organic Frameworks (MOFs). The state of the art of MOF stability in water, a crucial issue to many applications in which MOFs are promising candidates, is discussed here. Stability in both gaseous (such as humid gases) and aqueous media is considered. By considering a non-exhaustive yet representative set of MOFs, the different mechanisms of water adsorption in this class of materials are presented: reversible and continuous pore filling, irreversible and discontinuous pore filling through capillary condensation, and irreversibility arising from the flexibility and possible structural modifications of the host material. Water adsorption properties of more than 60 MOF samples are reported. The applications of MOFs as materials for heat-pumps and adsorbent-based chillers and proton conductors are also reviewed. Some directions for future work are suggested as concluding remarks.

Highly oxygenated organic molecules (HOM) are formed in the atmosphere via autoxidation involving peroxy radicals arising from volatile organic compounds (VOC). HOM condense on pre-existing particles and can be involved in new particle formation. HOM thus contribute to the formation of secondary organic aerosol (SOA), a significant and ubiquitous component of atmospheric aerosol known to affect the Earth's radiation balance. HOM were discovered only very recently, but the interest in these compounds has grown rapidly. In this Review, we define HOM and describe the currently available techniques for their identification/quantification, followed by a summary of the current knowledge on their formation mechanisms and physicochemical properties. A main aim is to provide a common frame for the currently quite fragmented literature on HOM studies. Finally, we highlight the existing gaps in our understanding and suggest directions for future HOM research.

International audience

Abstract The synthesis of a large number of fine chemicals, particularly in the field of flavor and fragrance chemistry [1,2] and pharmaceuticals [3], involves the selective hydrogenation of unsaturated carbonyl intermediates as a critical step. The hydrogenation of α,β-unsaturated carbonyls into saturated carbonyls is comparatively easy to achieve because thermodynamics favor the hydro-genation of the C═C bonds; therefore, research efforts were more directed at improving the selectivity to unsaturated alcohols. When a substituent is present on the carbon atom of the carbonyl group (i.e. with ketones), there is no chance to hydrogenate selectively the C═O bond, and saturated ketones are obtained with a high yield. This review is thus mostly restricted to the hydrogenation of α, β-unsaturated aldehydes into the corresponding unsaturated alcohols.

Corundum, α-Al 2 O 3 , is the thermodynamically stable phase of coarsely crystalline aluminum oxide, but syntheses of nanocrystalline Al 2 O 3 usually result in γ-Al 2 O 3 . Adsorption microcalorimetry, thermogravimetric analyses, and Brunauer-Emmett-Teller adsorption experiments, coupled with recently reported high-temperature solution calorimetry data, prove that γ-Al 2 O 3 has a lower surface energy than α-Al 2 O 3 and becomes energetically stable at surface areas greater than 125 square meters per gram and thermodynamically stable at even smaller surface areas (for example, 75 square meters per gram at 800 kelvin). The results are in agreement with recent molecular dynamics simulations and provide conclusive experimental evidence that differences in surface energy can favor the formation of a particular polymorph.

Photochemical metal-organic deposition (PMOD) was used to prepare amorphous metal oxide films containing specific concentrations of iron, cobalt, and nickel to study how metal composition affects heterogeneous electrocatalytic water oxidation. Characterization of the films by energy-dispersive X-ray spectroscopy and X-ray photoelectron spectroscopy confirmed excellent stoichiometric control of each of the 21 complex metal oxide films investigated. In studying the electrochemical oxidation of water catalyzed by the respective films, it was found that small concentrations of iron produced a significant improvement in Tafel slopes and that cobalt or nickel were critical in lowering the voltage at which catalysis commences. The best catalytic parameters of the series were obtained for the film of composition a-Fe20Ni80. An extrapolation of the electrochemical and XPS data indicates the optimal behavior of this binary film to be a manifestation of iron stabilizing nickel in a higher oxidation level. This work represents the first mechanistic study of amorphous phases of binary and ternary metal oxides for use as water oxidation catalysts, and provides the foundation for the broad exploration of other mixed-metal oxide combinations.

Atmospheric aerosols can be categorized into primary particles, which are directly emitted by their sources, and secondary particles, generated in the atmosphere from gaseous inorganic and organic precursors. For example, atmospheric oxidation of sulfur containing compounds leads to sulfuric acid and its salts, which represent a major secondary inorganic component of atmospheric aerosols. Likewise, oxidation of nitrogen oxides leads to nitric acid or its salts, which are also abundant in aerosols. The ocean surface, which covers three-quarters of the planet, offers a remarkably dynamic and chemically complex surface for interfacial reactions in the marine boundary layer. The porous nature of permanent or perennial snowpacks adds a tremendous amount of surface area, with which the atmosphere interacts. In short, solar radiation can provide the energy to initiate reactions while atmospherically available surfaces or condensed phases may act to reduce the required energy for a given photochemical pathway, for instance, by allowing a longer wavelength for reaction of species associated with a surface or bulk phase environment.

INGENIERIE+MPE

Abstract magnified image The direct and site‐selective transition metal‐catalysed N1‐, C2‐ or C3‐arylations of indoles have been the subject of almost continuous improvements since their discovery in early 1980s. This research area is mainly motivated by the biological relevance of this class of compounds in order to propose catalytic alternative syntheses to the well known methodologies involving the formation of the indole ring like the Fischer, Larock, Cacchi, Lautens etc. reactions. Since the late 1990s it has experienced new impulses related to the intensive development of catalytic CH activation. Today, through the intensive studies of Buchwald and Hartwig, the N1‐arylation of indoles has reached sufficient maturity for both academic and industrial applications. On the other hand, the selective C2‐ or C3‐arylation of indoles, initiated by Ohta in the middle 1980s, has become a hot research area these last years following the reports of Sames. Surprisingly, only few reports concern the use of heterogeneous catalysts; however, the application of these emerging methodologies seems to be related to the discovery of industrially attractive systems.

Aqueous solutions of glycerol were hydrogenolysed at 180 °C under 80 bar H2-pressure in the presence of supported metal catalysts in an attempt to selectively produce 1,2- and 1,3-propanediol. Catalysts (Cu, Pd, Rh), supports (ZnO, C, Al2O3), solvents (H2O, sulfolane, dioxane) and additives (H2WO4) were tested to improve reaction rate and selectivity to the target molecules. The best selectivity (100%) to 1,2-propanediol was obtained by hydrogenolysis of water solution of glycerol in the presence of CuO/ZnO catalysts. To improve the selectivity to 1,3-propanediol the reaction was conducted with rhodium catalysts with tungstic acid added to the reaction medium. The best result in terms of conversion and selectivity to 1,3-propanediol (1,3-PDO/1,2-PDO = 2) was obtained by operating in sulfolane. The presence of iron dissolved in the reaction medium was also beneficial for the selectivity to 1,3-PDO. A mechanism was proposed to account for the effect of these different parameters.

Abstract The formation of fatty acid methyl esters by transesterification with methanol can be monitored by 1 H nuclear magnetic resonance spectroscopy; this accurate determination is simpler than chromatographic methods.

BIOVERT+ADO:NES:FRA

Abstract. In this paper we describe and summarize the main achievements of the European Aerosol Cloud Climate and Air Quality Interactions project (EUCAARI). EUCAARI started on 1 January 2007 and ended on 31 December 2010 leaving a rich legacy including: (a) a comprehensive database with a year of observations of the physical, chemical and optical properties of aerosol particles over Europe, (b) comprehensive aerosol measurements in four developing countries, (c) a database of airborne measurements of aerosols and clouds over Europe during May 2008, (d) comprehensive modeling tools to study aerosol processes fron nano to global scale and their effects on climate and air quality. In addition a new Pan-European aerosol emissions inventory was developed and evaluated, a new cluster spectrometer was built and tested in the field and several new aerosol parameterizations and computations modules for chemical transport and global climate models were developed and evaluated. These achievements and related studies have substantially improved our understanding and reduced the uncertainties of aerosol radiative forcing and air quality-climate interactions. The EUCAARI results can be utilized in European and global environmental policy to assess the aerosol impacts and the corresponding abatement strategies.