Laboratory for Laser Energetics

We experimentally demonstrate a supercurrent-assisted, hotspot-formation mechanism for ultrafast detection and counting of visible and infrared photons. A photon-induced hotspot leads to a temporary formation of a resistive barrier across the superconducting sensor strip and results in an easily measurable voltage pulse. Subsequent hotspot healing in ∼30 ps time frame, restores the superconductivity (zero-voltage state), and the detector is ready to register another photon. Our device consists of an ultrathin, very narrow NbN strip, maintained at 4.2 K and current-biased close to the critical current. It exhibits an experimentally measured quantum efficiency of ∼20% for 0.81 μm wavelength photons and negligible dark counts.

OMEGA is a 60-terawatt, 60-beam, frequency-tripled Nd:glass laser system designed to perform precision direct-drive inertial-confinement-fusion (ICF) experiments. The upgrade to the system, completed in April 1995, met or surpassed all technical requirements. The acceptance tests demonstrated exceptional performance throughout the system: high driver stability (< 2% variations), precise control of the beam profiles and amplifier gains, 75% frequency-conversion efficiency, beam energy balance less than 8% and stable on-target irradiation of up to 37 kJ UV. We present these results and show that the system performance is well modeled by our propagation and frequency-conversion codes.

In the 2015 review paper ‘Petawatt Class Lasers Worldwide’ a comprehensive overview of the current status of high-power facilities of ${&gt;}200~\text{TW}$ was presented. This was largely based on facility specifications, with some description of their uses, for instance in fundamental ultra-high-intensity interactions, secondary source generation, and inertial confinement fusion (ICF). With the 2018 Nobel Prize in Physics being awarded to Professors Donna Strickland and Gerard Mourou for the development of the technique of chirped pulse amplification (CPA), which made these lasers possible, we celebrate by providing a comprehensive update of the current status of ultra-high-power lasers and demonstrate how the technology has developed. We are now in the era of multi-petawatt facilities coming online, with 100 PW lasers being proposed and even under construction. In addition to this there is a pull towards development of industrial and multi-disciplinary applications, which demands much higher repetition rates, delivering high-average powers with higher efficiencies and the use of alternative wavelengths: mid-IR facilities. So apart from a comprehensive update of the current global status, we want to look at what technologies are to be deployed to get to these new regimes, and some of the critical issues facing their development.

Single picosecond pulses have been amplified to the terawatt level by a table-top-size Nd:glass amplifier by using the technique of chirped pulse amplification (CPA). The divergence of the beam is twice the diffraction limit, making the brightness of this source equal to approximately 2*10/sup +18/ W/(cm-sr), which is thought to be the highest brightness yet reported. The CPA technique allows the efficient energy extraction from extremely compact amplifier systems. Amplification of chirped pulses over nine orders of magnitude, i.e. from nanojoule to the joule level, has been demonstrated.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">&gt;</ETX>

A new technique is presented for obtaining highly smooth focused laser beams. This approach is consistent with the constraints on frequency tripling the light, and it will not produce any significant high-intensity spikes within the laser chain, making the technique attractive for the high-power glass lasers used in current fusion experiments. Smoothing is obtained by imposing a frequency-modulated bandwidth on the laser beam using an electro-optic crystal. A pair of gratings is used to disperse the frequencies across the beam, without distorting the temporal pulse shape. The beam is broken up into beamlets, using a phase plate, such that the beamlet diffraction-limited focal spot is the size of the target. The time-averaged interference between beamlets is greatly reduced because of the frequency differences between the beamlets, and the result is a relatively smooth diffraction-limited intensity pattern on target.

The direct-drive, laser-based approach to inertial confinement fusion (ICF) is reviewed from its inception following the demonstration of the first laser to its implementation on the present generation of high-power lasers. The review focuses on the evolution of scientific understanding gained from target-physics experiments in many areas, identifying problems that were demonstrated and the solutions implemented. The review starts with the basic understanding of laser–plasma interactions that was obtained before the declassification of laser-induced compression in the early 1970s and continues with the compression experiments using infrared lasers in the late 1970s that produced thermonuclear neutrons. The problem of suprathermal electrons and the target preheat that they caused, associated with the infrared laser wavelength, led to lasers being built after 1980 to operate at shorter wavelengths, especially 0.35 μm—the third harmonic of the Nd:glass laser—and 0.248 μm (the KrF gas laser). The main physics areas relevant to direct drive are reviewed. The primary absorption mechanism at short wavelengths is classical inverse bremsstrahlung. Nonuniformities imprinted on the target by laser irradiation have been addressed by the development of a number of beam-smoothing techniques and imprint-mitigation strategies. The effects of hydrodynamic instabilities are mitigated by a combination of imprint reduction and target designs that minimize the instability growth rates. Several coronal plasma physics processes are reviewed. The two-plasmon–decay instability, stimulated Brillouin scattering (together with cross-beam energy transfer), and (possibly) stimulated Raman scattering are identified as potential concerns, placing constraints on the laser intensities used in target designs, while other processes (self-focusing and filamentation, the parametric decay instability, and magnetic fields), once considered important, are now of lesser concern for mainline direct-drive target concepts. Filamentation is largely suppressed by beam smoothing. Thermal transport modeling, important to the interpretation of experiments and to target design, has been found to be nonlocal in nature. Advances in shock timing and equation-of-state measurements relevant to direct-drive ICF are reported. Room-temperature implosions have provided an increased understanding of the importance of stability and uniformity. The evolution of cryogenic implosion capabilities, leading to an extensive series carried out on the 60-beam OMEGA laser [Boehly et al., Opt. Commun. 133, 495 (1997)], is reviewed together with major advances in cryogenic target formation. A polar-drive concept has been developed that will enable direct-drive–ignition experiments to be performed on the National Ignition Facility [Haynam et al., Appl. Opt. 46(16), 3276 (2007)]. The advantages offered by the alternative approaches of fast ignition and shock ignition and the issues associated with these concepts are described. The lessons learned from target-physics and implosion experiments are taken into account in ignition and high-gain target designs for laser wavelengths of 1/3 μm and 1/4 μm. Substantial advances in direct-drive inertial fusion reactor concepts are reviewed. Overall, the progress in scientific understanding over the past five decades has been enormous, to the point that inertial fusion energy using direct drive shows significant promise as a future environmentally attractive energy source.

Abstract We consider an accretion flow model originally proposed by Bisnovatyi-Kogan and Ruzmaikin (1974), which has been confirmed in recent 3D MHD simulations. In the model, the accreting gas drags in a strong poloidal magnetic field to the center such that the accumulated field disrupts the axisymmetric accretion flow at a relatively large radius. Inside the disruption radius, the gas accretes as discrete blobs or streams with a velocity much less than the free-fall velocity. Almost the entire rest mass energy of the gas is released as heat, radiation and mechanical/magnetic energy. Even for a non-rotating black hole, the efficiency of converting mass to energy is of order 50% or higher. The model is thus a practical analog of an idealized engine proposed by Geroch and Bekenstein.

Studies of multiphoton ionization of noble gases have been carried out using 1-\ensuremath{\mu}m, 1-ps laser pulses with intensities up to the mid- ${10}^{16}$ W/${\mathrm{cm}}^{2}$. To our knowledge, this work represents the first study of the production of highly ionized noble-gas ions done exclusively in the tunneling regime. It is found in this regime that the ionization at a given intensity depends on both the ionization potential and the charge state of the species. The onset of ionization occurs when the sum of the Coulomb and laser electric potentials causes the electron to be unbound.

A set of collective spin states is derived for a trapped Bose-Einstein condensate in which atoms have three internal hyperfine spins. These collective states minimize the interaction energy among condensate atoms, and they are characterized by strong spin correlations. We also examine the internal dynamics of an initially spin-polarized condensate. The time scale of spin mixing is predicted.

Amplified 150--300-fs laser pulses are applied to monitor the thermal modulation of the transmissivity of thin copper films. Non- equilibrium electron-lattice temperatures are observed. The process of electron-phonon energy transfer was time resolved and was observed to be 1--4 ps increasing with the laser fluence.

Abstract Obtaining a burning plasma is a critical step towards self-sustaining fusion energy 1 . A burning plasma is one in which the fusion reactions themselves are the primary source of heating in the plasma, which is necessary to sustain and propagate the burn, enabling high energy gain. After decades of fusion research, here we achieve a burning-plasma state in the laboratory. These experiments were conducted at the US National Ignition Facility, a laser facility delivering up to 1.9 megajoules of energy in pulses with peak powers up to 500 terawatts. We use the lasers to generate X-rays in a radiation cavity to indirectly drive a fuel-containing capsule via the X-ray ablation pressure, which results in the implosion process compressing and heating the fuel via mechanical work. The burning-plasma state was created using a strategy to increase the spatial scale of the capsule 2,3 through two different implosion concepts 4–7 . These experiments show fusion self-heating in excess of the mechanical work injected into the implosions, satisfying several burning-plasma metrics 3,8 . Additionally, we describe a subset of experiments that appear to have crossed the static self-heating boundary, where fusion heating surpasses the energy losses from radiation and conduction. These results provide an opportunity to study α-particle-dominated plasmas and burning-plasma physics in the laboratory.

A novel method by C. Zhou and R. Betti [Bull. Am. Phys. Soc. 50, 140 (2005)] to assemble and ignite thermonuclear fuel is presented. Massive cryogenic shells are first imploded by direct laser light with a low implosion velocity and on a low adiabat leading to fuel assemblies with large areal densities. The assembled fuel is ignited from a central hot spot heated by the collision of a spherically convergent ignitor shock and the return shock. The resulting fuel assembly features a hot-spot pressure greater than the surrounding dense fuel pressure. Such a nonisobaric assembly requires a lower energy threshold for ignition than the conventional isobaric one. The ignitor shock can be launched by a spike in the laser power or by particle beams. The thermonuclear gain can be significantly larger than in conventional isobaric ignition for equal driver energy.

We present three-dimensional MHD simulations of rotating radiatively inefficient accretion flows onto black holes. We continuously inject magnetized matter into the computational domain near the outer boundary and run the calculations long enough for the resulting accretion flow to reach a quasi-steady state. We have studied two limiting cases for the geometry of the injected magnetic field: pure toroidal field and pure poloidal field. In the case of toroidal field injection, the accreting matter forms a nearly axisymmetric, geometrically thick, turbulent accretion disk. The disk resembles in many respects the convection-dominated accretion flows found in previous numerical and analytical investigations of viscous hydrodynamic flows. Models with poloidal field injection evolve through two distinct phases. In an initial transient phase, the flow forms a relatively flattened, quasi-Keplerian disk with a hot corona and a bipolar outflow. However, when the flow later achieves steady state, it changes in character completely. The magnetized accreting gas becomes two-phase, with most of the volume being dominated by a strong dipolar magnetic field from which a thermal low-density wind flows out. Accretion occurs mainly via narrow slowly rotating radial streams that "diffuse'' through the magnetic field with the help of magnetic reconnection events.

Laser ionization of noble gases was studied with a 1.053-μm, 1-psec Nd:glass laser. A systematic scan of intensities from mid-1013 W/cm2 to mid-1016 W/cm2 was performed, resulting in the production of charge states as high as Xe12+. Ionization occurs exclusively in the tunneling regime. We compare experimental ion production rates with those predicted by several different theories. Agreement between experimental ion-production curves and theoretical predictions is good for two theoretical models: (1) an elaboration of the Keldysh tunneling model, developed by Ammosov et al. [ Sov. Phys. JETP64, 1191 ( 1986)] and (2) a much more primitive model, based on Coulomb-barrier suppression, in which tunneling and other quantum-mechanical effects are ignored completely. The success of the more primitive model suggests that a new term, barrier-suppression ionization, rather than tunneling or multiphoton ionization, may be the most appropriate at this wavelength and in this range of intensities.

For more than half a century, researchers around the world have been engaged in attempts to achieve fusion ignition as a proof of principle of various fusion concepts. Following the Lawson criterion, an ignited plasma is one where the fusion heating power is high enough to overcome all the physical processes that cool the fusion plasma, creating a positive thermodynamic feedback loop with rapidly increasing temperature. In inertially confined fusion, ignition is a state where the fusion plasma can begin "burn propagation" into surrounding cold fuel, enabling the possibility of high energy gain. While "scientific breakeven" (i.e., unity target gain) has not yet been achieved (here target gain is 0.72, 1.37 MJ of fusion for 1.92 MJ of laser energy), this Letter reports the first controlled fusion experiment, using laser indirect drive, on the National Ignition Facility to produce capsule gain (here 5.8) and reach ignition by nine different formulations of the Lawson criterion.

A line-imaging velocity interferometer has been implemented at the OMEGA laser facility of the Laboratory for Laser Energetics, University of Rochester. This instrument is the primary diagnostic for a variety of experiments involving laser-driven shock-wave propagation, including high-pressure equation of state experiments, materials characterization experiments, shock characterization for Rayleigh–Taylor experiments, and shock timing experiments for inertial confinement fusion research. Using a laser probe beam to illuminate a target, the instrument measures shock breakout times at temporal resolutions as low as 20 ps, and spatial resolution ∼4 μm. For velocity measurements the detection limit is &amp;lt;0.1 km/s, and velocities of interfaces, free surfaces, and shock fronts traveling through transparent media can be measured with accuracies ∼1% over the range from 4 km/s to greater than 50 km/s. Quantitative measurements of the optical reflectance of ionizing shock fronts can also be obtained simultaneously with the velocity measurements.

We present theoretical studies of a two-species Bose condensate. Using a new numerical method, we have calculated ground state wave functions and show that, due to interspecies interactions, the condensate mixture displays novel behavior not found in a pure condensate. We compared our results with those of the Thomas-Fermi approximation (TFA) and find that under a broad range of conditions the TFA can be reliably used to predict many qualitative features of the condensates. Using our technique, we have modeled a recent JILA experiment on dual spin-state ${}^{87}\mathrm{Rb}$ condensate. Finally, collective excitations of double condensates are discussed.

Pt@Fe 2 O 3 core−shell nanoparticles have been made using a sequential synthetic method. Platinum nanoparticles were synthesized via reduction of platinum acetylacetonate in octyl ether, and layers of iron oxide were subsequently deposited on the surface of Pt nanoparticles through thermal decomposition of iron pentacarbonyl. The core−shell nanoparticles were characterized by powder X-ray diffraction, high-resolution transmission electron microscopy, and X-ray photoemission spectroscopy. Thickness of the shell can be controlled by changing concentrations of the reactants and the reaction conditions. These Pt@Fe 2 O 3 core−shell nanoparticles could have potential applications in catalysis and as precursors for making property-tunable magnetic nanoparticles, thin films, and nanocomposites.

Ultrafast optics has undergone a revolution in the past two decades, driven by new methods of pulse generation, amplification, manipulation, and measurement. We review the advances made in the latter field over this period, indicating the general principles involved, how these have been implemented in various experimental approaches, and how the most popular methods encode the temporal electric field of a short optical pulse in the measured signal and extract the field from the data.

On December 5, 2022, an indirect drive fusion implosion on the National Ignition Facility (NIF) achieved a target gain G_{target} of 1.5. This is the first laboratory demonstration of exceeding "scientific breakeven" (or G_{target}>1) where 2.05 MJ of 351 nm laser light produced 3.1 MJ of total fusion yield, a result which significantly exceeds the Lawson criterion for fusion ignition as reported in a previous NIF implosion [H. Abu-Shawareb et al. (Indirect Drive ICF Collaboration), Phys. Rev. Lett. 129, 075001 (2022)PRLTAO0031-900710.1103/PhysRevLett.129.075001]. This achievement is the culmination of more than five decades of research and gives proof that laboratory fusion, based on fundamental physics principles, is possible. This Letter reports on the target, laser, design, and experimental advancements that led to this result.