National Chemical Laboratory

Natural fiber reinforced composites is an emerging area in polymer science. These natural fibers are low cost fibers with low density and high specific properties. These are biodegradable and non-abrasive. The natural fiber composites offer specific properties comparable to those of conventional fiber composites. However, in development of these composites, the incompatibility of the fibers and poor resistance to moisture often reduce the potential of natural fibers and these draw backs become critical issue. This review presents the reported work on natural fiber reinforced composites with special reference to the type of fibers, matrix polymers, treatment of fibers and fiber-matrix interface. © 1999 John Wiley & Sons, Inc. Adv in Polymer Techn 18: 351–363, 1999

Proteases represent the class of enzymes which occupy a pivotal position with respect to their physiological roles as well as their commercial applications. They perform both degradative and synthetic functions. Since they are physiologically necessary for living organisms, proteases occur ubiquitously in a wide diversity of sources such as plants, animals, and microorganisms. Microbes are an attractive source of proteases owing to the limited space required for their cultivation and their ready susceptibility to genetic manipulation. Proteases are divided into exo- and endopeptidases based on their action at or away from the termini, respectively. They are also classified as serine proteases, aspartic proteases, cysteine proteases, and metalloproteases depending on the nature of the functional group at the active site. Proteases play a critical role in many physiological and pathophysiological processes. Based on their classification, four different types of catalytic mechanisms are operative. Proteases find extensive applications in the food and dairy industries. Alkaline proteases hold a great potential for application in the detergent and leather industries due to the increasing trend to develop environmentally friendly technologies. There is a renaissance of interest in using proteolytic enzymes as targets for developing therapeutic agents. Protease genes from several bacteria, fungi, and viruses have been cloned and sequenced with the prime aims of (i) overproduction of the enzyme by gene amplification, (ii) delineation of the role of the enzyme in pathogenecity, and (iii) alteration in enzyme properties to suit its commercial application. Protein engineering techniques have been exploited to obtain proteases which show unique specificity and/or enhanced stability at high temperature or pH or in the presence of detergents and to understand the structure-function relationships of the enzyme. Protein sequences of acidic, alkaline, and neutral proteases from diverse origins have been analyzed with the aim of studying their evolutionary relationships. Despite the extensive research on several aspects of proteases, there is a paucity of knowledge about the roles that govern the diverse specificity of these enzymes. Deciphering these secrets would enable us to exploit proteases for their applications in biotechnology.

Biogenic gold nanotriangles and spherical silver nanoparticles were synthesized by a simple procedure using Aloe vera leaf extract as the reducing agent. This procedure offers control over the size of the gold nanotriangle and thereby a handle to tune their optical properties, particularly the position of the longitudinal surface plasmon resonance. The kinetics of gold nanotriangle formation was followed by UV-vis-NIR absorption spectroscopy and transmission electron microscopy (TEM). The effect of reducing agent concentration in the reaction mixture on the yield and size of the gold nanotriangles was studied using transmission electron microscopy. Monitoring the formation of gold nanotriangles as a function of time using TEM reveals that multiply twinned particles (MTPs) play an important role in the formation of gold nanotriangles. It is observed that the slow rate of the reaction along with the shape directing effect of the constituents of the extract are responsible for the formation of single crystalline gold nanotriangles. Reduction of silver ions by Aloe vera extract however, led to the formation of spherical silver nanoparticles of 15.2 nm +/- 4.2 nm size.

Two new chemically stable [acid and base] 2D crystalline covalent organic frameworks (COFs) (TpPa-1 and TpPa-2) were synthesized using combined reversible and irreversible organic reactions. Syntheses of these COFs were done by the Schiff base reactions of 1,3,5-triformylphloroglucinol (Tp) with p-phenylenediamine (Pa-1) and 2,5-dimethyl-p-phenylenediamine (Pa-2), respectively, in 1:1 mesitylene/dioxane. The expected enol-imine (OH) form underwent irreversible proton tautomerism, and only the keto-enamine form was observed. Because of the irreversible nature of the total reaction and the absence of an imine bond in the system, TpPa-1 and TpPa-2 showed strong resistance toward acid (9 N HCl) and boiling water. Moreover, TpPa-2 showed exceptional stability in base (9 N NaOH) as well.

Macrophages are one of the principal immune effector cells that play essential roles as secretory, phagocytic, and antigen-presenting cells in the immune system. In this study, we address the issue of cytotoxicity and immunogenic effects of gold nanoparticles on RAW264.7 macrophage cells. The cytotoxicity of gold nanoparticles has been correlated with a detailed study of their endocytotic uptake using various microscopy tools such as atomic force microscopy (AFM), confocal-laser-scanning microscopy (CFLSM), and transmission electron microscopy (TEM). Our findings suggest that Au(0) nanoparticles are not cytotoxic, reduce the production of reactive oxygen and nitrite species, and do not elicit secretion of proinflammatory cytokines TNF-alpha and IL1-beta, making them suitable candidates for nanomedicine. AFM measurements suggest that gold nanoparticles are internalized inside the cell via a mechanism involving pinocytosis, while CFLSM and TEM studies indicate their internalization in lysosomal bodies arranged in perinuclear fashion. Our studies thus underline the noncytotoxic, nonimmunogenic, and biocompatible properties of gold nanoparticles with the potential for application in nanoimmunology, nanomedicine, and nanobiotechnology.

Covalent organic frameworks (COFs) represent a new field of rapidly growing chemical research that takes direct inspiration from diverse covalent bonds existing between atoms. The success of linking atoms in two and three dimensions to construct extended framework structures moved the chemistry of COFs beyond the structures to methodologies, highlighting the possibility of prospective applications. Although structure to property relation in COFs has led to fascinating properties, chemical stability, processability and scalability were some of the important challenges that needed to be overcome for their successful implementation. In this Perspective, we take a closer look at the growth of COFs from mere supramolecular structures to potential industrializable materials.

A novel biological method for the synthesis of silver nanoparticles using the fungus Verticillium is reported. Exposure of the fungal biomass to aqueous Ag+ ions resulted in the intracellular reduction of the metal ions and formation of silver nanoparticles of dimensions 25 ± 12 nm. Electron microscopy analysis of thin sections of the fungal cells indicated that the silver particles were formed below the cell wall surface, possibly due to reduction of the metal ions by enzymes present in the cell wall membrane. The metal ions were not toxic to the fungal cells and the cells continued to multiply after biosynthesis of the silver nanoparticles.

ADVERTISEMENT RETURN TO ISSUEPREVArticleNEXTOrganic Carbonates†Abbas-Alli G. Shaikh and Swaminathan SivaramView Author Information Department of Chemical Sciences, North Maharashtra University, Jalgaon 425 001, India Division of Polymer Chemistry, National Chemical Laboratory, Pune 411 008, IndiaCite this: Chem. Rev. 1996, 96, 3, 951–976Publication Date (Web):May 9, 1996Publication History Received30 June 1995Revised27 February 1996Published online9 May 1996Published inissue 1 January 1996https://doi.org/10.1021/cr950067iCopyright © 1996 American Chemical SocietyRequest reuse permissionsArticle Views13037Altmetric-Citations1222LEARN ABOUT THESE METRICSArticle Views are the COUNTER-compliant sum of full text article downloads since November 2008 (both PDF and HTML) across all institutions and individuals. These metrics are regularly updated to reflect usage leading up to the last few days.Citations are the number of other articles citing this article, calculated by Crossref and updated daily. Find more information about Crossref citation counts.The Altmetric Attention Score is a quantitative measure of the attention that a research article has received online. Clicking on the donut icon will load a page at altmetric.com with additional details about the score and the social media presence for the given article. Find more information on the Altmetric Attention Score and how the score is calculated. Share Add toView InAdd Full Text with ReferenceAdd Description ExportRISCitationCitation and abstractCitation and referencesMore Options Share onFacebookTwitterWechatLinked InReddit Read OnlinePDF (379 KB) Get e-AlertscloseSUBJECTS:Alkyls,Aromatic compounds,Catalysts,Hydrocarbons,Inorganic carbon compounds Get e-Alerts

The copper(I)-catalyzed 1,2,3-triazole-forming reaction between azides and terminal alkynes has become the gold standard of 'click chemistry' due to its reliability, specificity, and biocompatibility. Applications of click chemistry are increasingly found in all aspects of drug discovery; they range from lead finding through combinatorial chemistry and target-templated in vitro chemistry, to proteomics and DNA research by using bioconjugation reactions. The triazole products are more than just passive linkers; they readily associate with biological targets, through hydrogen-bonding and dipole interactions. The present review will focus mainly on the recent literature for applications of this reaction in the field of medicinal chemistry, in particular on use of the 1,2,3-triazole moiety as pharmacophore.

Development of biologically inspired experimental processes for the synthesis of nanoparticles is evolving into an important branch of nanotechnology. In this paper, we report on the use of Geranium (Pelargonium graveolens) leaf extract in the extracellular synthesis of silver nanoparticles. On treating aqueous silver nitrate solution with geranium leaf extract, rapid reduction of the silver ions is observed leading to the formation of highly stable, crystalline silver nanoparticles in solution. Transmission electron microscopy analysis of the silver particles indicated that they ranged in size from 16 to 40 nm and were assembled in solution into quasilinear superstructures. The rate of reduction of the silver ions by the geranium leaf extract is faster than that observed by us in an earlier study using a fungus, Fusarium oxysporum, thus highlighting the possibility that nanoparticle biosynthesis methodologies will achieve rates of synthesis comparable to those of chemical methods. This study also represents an important advance in the use of plants over microorganisms in the biosynthesis of metal nanoparticles.

Three thermally and chemically stable isoreticular covalent organic frameworks (COFs) were synthesized via room-temperature solvent-free mechanochemical grinding. These COFs were successfully compared with their solvothermally synthesized counterparts in all aspects. These solvent-free mechanochemically synthesized COFs have moderate crystallinity with remarkable stability in boiling water, acid (9 N HCl), and base [TpBD (MC) in 3 N NaOH and TpPa-2 (MC) in 9 N NaOH]. Exfoliation of COF layers was simultaneously observed with COF formation during mechanochemical synthesis. The structures thus obtained seemed to have a graphene-like layered morphology (exfoliated layers), unlike the parent COFs synthesized solvothermally.

Core-shell nanoparticles (CSNs) are a class of nanostructured materials that have recently received increased attention owing to their interesting properties and broad range of applications in catalysis, biology, materials chemistry and sensors. By rationally tuning the cores as well as the shells of such materials, a range of core-shell nanoparticles can be produced with tailorable properties that can play important roles in various catalytic processes and offer sustainable solutions to current energy problems. Various synthetic methods for preparing different classes of CSNs, including the Stöber method, solvothermal method, one-pot synthetic method involving surfactants, etc., are briefly mentioned here. The roles of various classes of CSNs are exemplified for both catalytic and electrocatalytic applications, including oxidation, reduction, coupling reactions, etc.

The December 2011 release of a draft United States Food and Drug Administration (FDA) guidance concerning regulatory classification of pharmaceutical cocrystals of active pharmaceutical ingredients (APIs) addressed two matters of topical interest to the crystal engineering and pharmaceutical science communities: (1) a proposed definition of cocrystals; (2) a proposed classification of pharmaceutical cocrystals as dissociable ``API-excipient'' molecular complexes. The Indo U.S. Bilateral Meeting sponsored by the Indo-U.S. Science and Technology Forum titled The Evolving Role of Solid State Chemistry in Pharmaceutical Science was held in Manesar near Delhi, India, from February 2-4, 2012. A session of the meeting was devoted to discussion of the FDA guidance draft. The debate generated strong consensus on the need to define cocrystals more broadly and to classify them like salts. It was also concluded that the diversity of API crystal forms makes it difficult to classify solid forms into three categories that are mutually exclusive. This perspective summarizes the discussion in the Indo-U.S. Bilateral Meeting and includes contributions from researchers who were not participants in the meeting.

Cancer is a severe health problem that continues to be a leading cause of death worldwide. Increasing knowledge of the molecular mechanisms underlying cancer progression has led to the development of a vast number of anticancer drugs. However, the use of chemically synthesized drugs has not significantly improved the overall survival rate over the past few decades. As a result, new strategies and novel chemoprevention agents are needed to complement current cancer therapies to improve efficiency. Naturally occurring compounds from plants known as phytochemicals serve as vital resources for novel drugs and are also sources for cancer therapy. Some typical examples include taxol analogs, vinca alkaloids such as vincristine, vinblastine and podophyllotoxin analogs. These phytochemicals often act via regulating molecular pathways which are implicated in growth and progression of cancer. The specific mechanisms include increasing antioxidant status, carcinogen inactivation, inhibiting proliferation, induction of cell cycle arrest and apoptosis; and regulation of the immune system. The primary objective of this review is to describe what we know to date of the active compounds in the natural products, along with their pharmacologic action and molecular or specific targets. Recent trends and gaps in phytochemical based anticancer drug discovery are also explored. The authors wish to expand the phytochemical research area not only for their scientific soundness but also for their potential druggability. Hence, the emphasis is given to information about anticancer phytochemicals which are evaluated at preclinical and clinical level.

.

Development of biologically inspired experimental processes for the synthesis of nanoparticles is an important branch of nanotechnology. In this paper, we report on the use of geranium leaves (Pelargonium graveolens) and its endophytic fungus in the extra-cellular synthesis of gold nanoparticles. Sterilized geranium leaves and an endophytic fungus (Colletotrichum sp.) growing in the leaves were separately exposed to aqueous chloroaurate ions. In both cases, rapid reduction of the metal ions was observed resulting in the formation of stable gold nanoparticles of variable size. In the case of gold nanoparticles synthesized using geranium leaves, the reducing and capping agents appear to be terpenoids while they are identified to be polypeptides/enzymes in the Colletotrichum sp. case. The biogenic gold nanoparticles synthesized using the fungus were essentially spherical in shape while the particles grown using the leaves exhibited a variety of shapes that included rods, flat sheets and triangles. While the exact reasons for shape variability are not clear at this stage, the possibility of achieving nanoparticle shape control in a host leaf–fungus system is potentially exciting.

There is little doubt that nanomaterials will play a key role in many technologies of the future. One key aspect of nanotechnology concerns the development of reliable experimental protocols for the synthesis of nanomaterials over a range of chemical compositions, sizes and high monodispersity. In the context of the current drive to develop green technologies in materials synthesis, this aspect of nanotechnology assumes considerable importance. An attractive possibility is to use micro-organisms in the synthesis of nanoparticles. In this article, we provide a brief overview of the research efforts worldwide on the use of micro-organisms in the biosynthesis of inorganic nanoparticles, with particular emphasis on the recent and exciting results obtained at the National Chemical Laboratory, Pune on the biosynthesis of noble-metal nanoparticles using fungi and actinomycete. Some of the challenges in this emerging approach are highlighted.

ADVERTISEMENT RETURN TO ISSUEPREVArticleNEXTConstruction of Enantiopure Pyrrolidine Ring System via Asymmetric [3+2]-Cycloaddition of Azomethine YlidesGanesh Pandey, Prabal Banerjee, and Smita R. GadreView Author Information Division of Organic Chemistry (Synthesis), National Chemical Laboratory, Pune 411 008, India Cite this: Chem. Rev. 2006, 106, 11, 4484–4517Publication Date (Web):October 25, 2006Publication History Received26 September 2005Published online25 October 2006Published inissue 1 November 2006https://pubs.acs.org/doi/10.1021/cr050011ghttps://doi.org/10.1021/cr050011gresearch-articleACS PublicationsCopyright © 2006 American Chemical SocietyRequest reuse permissionsArticle Views10391Altmetric-Citations882LEARN ABOUT THESE METRICSArticle Views are the COUNTER-compliant sum of full text article downloads since November 2008 (both PDF and HTML) across all institutions and individuals. These metrics are regularly updated to reflect usage leading up to the last few days.Citations are the number of other articles citing this article, calculated by Crossref and updated daily. Find more information about Crossref citation counts.The Altmetric Attention Score is a quantitative measure of the attention that a research article has received online. Clicking on the donut icon will load a page at altmetric.com with additional details about the score and the social media presence for the given article. Find more information on the Altmetric Attention Score and how the score is calculated. Share Add toView InAdd Full Text with ReferenceAdd Description ExportRISCitationCitation and abstractCitation and referencesMore Options Share onFacebookTwitterWechatLinked InRedditEmail Other access optionsGet e-Alertsclose SUBJECTS:Addition reactions,Azomethine,Cyclization,Molecular structure,Stereoselectivity Get e-Alerts

A series of five thermally and chemically stable functionalized covalent organic frameworks (COFs), namely, TpPa-NO2, TpPa-F4, TpBD-(NO2)2, TpBD-Me2, and TpBD-(OMe)2 were synthesized by employing the solvothermal aldehyde-amine Schiff base condensation reaction. In order to complete the series, previously reported TpPa-1, TpPa-2, and TpBD have also been synthesized, and altogether, eight COFs were fully characterized through powder X-ray diffraction (PXRD), Fourier transform IR (FT-IR) spectroscopy, (13)C solid-state NMR spectroscopy, and thermogravimetric analysis. These COFs are crystalline, permanently porous, and stable in boiling water, acid (9 N HCl), and base (3 N NaOH). The synthesized COFs (all eight) were successfully delaminated using a simple, safe, and environmentally friendly mechanical grinding route to transform into covalent organic nanosheets (CONs) and were well characterized via transmission electron microscopy and atomic force microscopy. Further PXRD and FT-IR analyses confirm that these CONs retain their structural integrity throughout the delamination process and also remain stable in aqueous, acidic, and basic media like the parent COFs. These exfoliated CONs have graphene-like layered morphology (delaminated layers), unlike the COFs from which they were synthesized.

Hemicellulolytic microorganisms play a significant role in nature by recycling hemicellulose, one of the main components of plant polysaccharides. Xylanases (EC 3.2.1.8) catalyze the hydrolysis of xylan, the major constituent of hemicellulose. The use of these enzymes could greatly improve the overall economics of processing lignocellulosic materials for the generation of liquid fuels and chemicals. Recently cellulase-free xylanases have received great attention in the development of environmentally friendly technologies in the paper and pulp industry. In microorganisms that produce xylanases low molecular mass fragments of xylan and their positional isomers play a key role in regulating its biosynthesis. Xylanase and cellulase production appear to be regulated separately, although the pleiotropy of mutations, which causes the elimination of both genes, suggests some linkage in the synthesis of the two enzymes. Xylanases are found in a cornucopia of organisms and the genes encoding them have been cloned in homologous and heterologous hosts with the objectives of overproducing the enzyme and altering its properties to suit commercial applications. Sequence analyses of xylanases have revealed distinct catalytic and cellulose binding domains, with a separate non-catalytic domain that has been reported to confer enhanced thermostability in some xylanases. Analyses of three-dimensional structures and the properties of mutants have revealed the involvement of specific tyrosine and tryptophan residues in the substrate binding site and of glutamate and aspartate residues in the catalytic mechanism. Many lines of evidence suggest that xylanases operate via a double displacement mechanism in which the anomeric configuration is retained, although some of the enzymes catalyze single displacement reactions with inversion of configuration. Based on a dendrogram obtained from amino acid sequence similarities the evolutionary relationship between xylanases is assessed. In addition the properties of xylanases from extremophilic organisms have been evaluated in terms of biotechnological applications.