Pukyong National University

This review presents a robust strategy to design photosensitizers (PSs) for various species. Photodynamic therapy (PDT) is a photochemical-based treatment approach that involves the use of light combined with a light-activated chemical, referred to as a PS. Attractively, PDT is one of the alternatives to conventional cancer treatment due to its noninvasive nature, high cure rates, and low side effects. PSs play an important factor in photoinduced reactive oxygen species (ROS) generation. Although the concept of photosensitizer-based photodynamic therapy has been widely adopted for clinical trials and bioimaging, until now, to our surprise, there has been no relevant review article on rational designs of organic PSs for PDT. Furthermore, most of published review articles in PDT focused on nanomaterials and nanotechnology based on traditional PSs. Therefore, this review aimed at reporting recent strategies to develop innovative organic photosensitizers for enhanced photodynamic therapy, with each example described in detail instead of providing only a general overview, as is typically done in previous reviews of PDT, to provide intuitive, vivid, and specific insights to the readers.

In this paper, the design and implementation of a wireless power transfer system for moving electric vehicles along with an example of an online electric vehicle system are presented. Electric vehicles are charged on roadway by wireless power transfer technology. Electrical and practical designs of the inverter, power lines, pickup, rectifier, and regulator as well as an optimized core structure design for a large air gap are described. Also, electromotive force shielding for the electric vehicle is suggested. The overall system was implemented and tested. The experimental results showed that 100-kW power with 80% power transfer efficiency under 26-cm air gap was acquired.

Tunable Metamaterials The electromagnetic response of metamaterials gives rise to exciting phenomena such as cloaking, negative refraction, and perfect lensing. Their response, however, tends to depend strongly on resonant effects, thereby limiting the application bandwidth. Driscoll et al. (p. 1518 , published online 20 August) combine a split ring resonator array with the phase change material, VO 2 , to form a metamaterial in which the response can be tuned. The heat-induced phase change of VO 2 from an insulator to a metal alters the response of split-ring resonator, and, because it displays a hysteresis, the device can retain a “memory” of the induced change. The results may lead to a flexible method for achieving metamaterials operating over a wide bandwidth and to novel switching applications.

Bone contains considerable amounts of minerals and proteins. Hydroxyapatite [Ca₁₀(PO₄)₆(OH)₂] is one of the most stable forms of calcium phosphate and it occurs in bones as major component (60 to 65%), along with other materials including collagen, chondroitin sulfate, keratin sulfate and lipids. In recent years, significant progress has been made in organ transplantation, surgical reconstruction and the use of artificial prostheses to treat the loss or failure of an organ or bone tissue. Chitosan has played a major role in bone tissue engineering over the last two decades, being a natural polymer obtained from chitin, which forms a major component of crustacean exoskeleton. In recent years, considerable attention has been given to chitosan composite materials and their applications in the field of bone tissue engineering due to its minimal foreign body reactions, an intrinsic antibacterial nature, biocompatibility, biodegradability, and the ability to be molded into various geometries and forms such as porous structures, suitable for cell ingrowth and osteoconduction. The composite of chitosan including hydroxyapatite is very popular because of the biodegradability and biocompatibility in nature. Recently, grafted chitosan natural polymer with carbon nanotubes has been incorporated to increase the mechanical strength of these composites. Chitosan composites are thus emerging as potential materials for artificial bone and bone regeneration in tissue engineering. Herein, the preparation, mechanical properties, chemical interactions and in vitro activity of chitosan composites for bone tissue engineering will be discussed.

Common weaknesses of current drought indexes were analyzed. First, most of the current indexes are not precise enough in detecting the onset, end, and accumulated stress of drought. Second, they do not effectively take into account the aggravating effects of runoff and evapotranspiration, which build up with time. Third, they have a limited usefulness in monitoring ongoing drought because they are based on a monthly time step. Fourth, most of them fail to differentiate the effects of drought on surface and subsurface water supply.

Flash memory is being rapidly deployed as data storage for mobile devices such as PDAs, MP3 players, mobile phones, and digital cameras, mainly because of its low electronic power, nonvolatile storage, high performance, physical stability, and portability. One disadvantage of flash memory is that prewritten data cannot be dynamically overwritten. Before overwriting prewritten data, a time-consuming erase operation on the used blocks must precede, which significantly degrades the overall write performance of flash memory. In order to solve this “erase-before-write” problem, the flash memory controller can be integrated with a software module, called “flash translation layer (FTL).” Among many FTL schemes available, the log block buffer scheme is considered to be optimum. With this scheme, a small number of log blocks, a kind of write buffer, can improve the performance of write operations by reducing the number of erase operations. However, this scheme can suffer from low space utilization of log blocks. In this paper, we show that there is much room for performance improvement in the log buffer block scheme, and propose an enhanced log block buffer scheme, called FAST (full associative sector translation). Our FAST scheme improves the space utilization of log blocks using fully-associative sector translations for the log block sectors. We also show empirically that our FAST scheme outperforms the pure log block buffer scheme.

Hoki (Johnius belengerii) skin gelatin was hydrolyzed with three commercial enzymes to identify radical-scavenging potencies of derived peptides. Peptides derived from tryptic hydrolysate exhibited the highest scavenging activities on superoxide, carbon-centered 1,1-diphenyl-2-picrylhydrazyl (DPPH) radicals assessed by ESR spectroscopy. Following consecutive chromatographic separations of tryptic hydroolysate, the peptide sequence His-Gly-Pro-Leu-Gly-Pro-Leu (797 Da) acted as a strong radical scavenger under studied conditions. Further, this peptide could act as an antioxidant against linoleic acid peroxidation and the activity was closer to the highly active synthetic antioxidant butylated hydroxytoluene (BHT). In addition, antioxidative enzyme levels in cultured human hepatoma cells were increased in the presence of this peptide and it was presumed to be the peptide involved in maintaining the redox balance in the cell environment. Present data indicate that free-radical-scavenging activities of hoki skin gelatin peptides substantially contribute to their antioxidant properties measured in different oxidative systems.

nanocrystals in a wide variety of sizes, shapes, and compositions, an important aspect for the development of precisely tuned perovskite nanocrystal inks.

The importance of marine algae as sources of functional ingredients has been well recognized due to their valuable health beneficial effects. Therefore, isolation and investigation of novel ingredients with biological activities from marine algae have attracted a great deal of attention. Among functional ingredients identified from marine algae, natural pigments (NPs) have received particular attention. These NPs exhibit various beneficial biological activities such as antioxidant, anticancer, anti-inflammatory, anti-obesity, anti-angiogenic and neuroprotective activities. This contribution focuses on biological activities of marine algae-derived NPs and emphasizing their potential applications in foods as well as pharmaceuticals areas.

OBJECTIVE: To determine the efficacies of antibacterial and antioxidant activities of aqueous leaf extract of Psidium guajava mediated biosynthesis of titanium dioxide nanoparticles (TiO2 NPs). METHODS: Synthesized TiO2 NPs were tested by disc diffusion method against against human pathogenic bacteria. The total antioxidant activity and phenolic content (Folin-Ciocalteau method) of synthesized TiO2 NPs and aqueous plant extract were determined. The scavenging radicals were estimated by DPPH method. The synthesized TiO2 NPs were characterized by XRD, FTIR, FESEM and EDX. RESULTS: FTIR spectra of synthesized TiO2 NPs exhibited prominent peaks at 3 410 cm(-1) (alkynes), 1 578 cm(-1), 1 451 cm(-1) (alkanes), and 1 123 cm(-1)(C-O absorption). The morphological characterization of synthesized TiO2 NPs was analysed by FESEM which showed spherical shape and clusters with an average size of 32.58 nm. The maximum zone of inhibition was observed in the synthesized TiO2 NPs (20 μg/mL) against Staphylococcus aureus (25 mm) and Escherichia coli (23 mm). The synthesized TiO2 NPs showed more antibacterial activity than the standard antibiotic disk, tetracycline which drastically reduces the chances for the development of antibiotics resistance of bacterial species. The plant aqueous extract and synthesized TiO2 NPs were found to possess maximum antioxidant activity when compared with ascorbic acid. The content of phenolic compounds (mg/g) in leaf aqueous extract and synthesized TiO2 NPs were found to be 85.4 and 18.3 mgTA/g, respectively. CONCLUSIONS: Green synthesized TiO2 NPs provides a promising approach can satisfy the requirement of large-scale industrial production bearing the advantage of low-cost, eco-friendly and reproducible.

Enzymatic browning because of polyphenol oxidases (PPOs) contributes to the color quality of fruit and vegetable (FV) products. Physical and chemical methods have been developed to inhibit the activity of PPOs, and several synthetic chemical compounds are commonly being used as PPO inhibitors in FV products. Recently, there has been an emphasis on consumer-oriented innovations in the food industry. Consumers tend to urge the use of natural and environment-friendly PPO inhibitors. The purpose of this review is to summarize the mechanisms underlying the anti-browning action of chemical PPO inhibitors and current trends in the research on these inhibitors. Based on their mechanisms of action, chemical inhibitors can be categorized as antioxidants, reducing agents, chelating agents, acidulants, and/or mixed-type PPO inhibitors. Here, we focused on the food ingredients, dietary components, food by-products, and waste associated with anti-browning activity.

Gelatin extracted from Alaska pollack skin was hydrolyzed with serial digestions in the order of Alcalase, Pronase E, and collagenase using a three-step recycling membrane reactor. The fraction from the second step, which was hydrolyzed with Pronase E, was composed of peptides ranging from 1.5 to 4.5 kDa and showed high antioxidative activity. Two different peptides showing strong antioxidative activity were isolated from the hydrolysate using consecutive chromatographic methods including gel filtration on a Sephadex G-25 column, ion-exchange chromatography on a SP-Sephadex C-25 column, and high-performance liquid chromatography on an ODS column. The isolated peptides, P1 and P2, were composed of 13 and 16 amino acid residues, respectively; and both peptides contained a Gly residue at the C-terminus and the repeating motif Gly-Pro-Hyp. The antioxidative activities of the purified peptides were measured using the thiobarbituric acid method, and the cell viability was measured with MTT assay. The results showed that P2 had potent antioxidative activity on peroxidation of linoleic acid. Moreover, the cell viability of cultured liver cells was significantly enhanced by addition of the peptide. These results indicate that the purified peptide, P2, from gelatin hydrolysate of Alaska pollack skin is a natural antioxidant which has potent antioxidative activity.

The tremendous amount of food waste from diverse sources is an environmental burden if disposed of inappropriately. Thus, implementation of a biorefinery platform for food waste is an ideal option to pursue (e.g., production of value-added products while reducing the volume of waste). The adoption of such a process is expected to reduce the production cost of biodegradable plastics (e.g., compared to conventional routes of production using overpriced pure substrates (e.g., glucose)). This review focuses on current technologies for the production of polyhydroxyalkanoates (PHA) from food waste. Technical details were also described to offer clear insights into diverse pretreatments for preparation of raw materials for the actual production of bioplastic (from food wastes). In this respect, particular attention was paid to fermentation technologies based on pure and mixed cultures. A clear description on the chemical modification of starch, cellulose, chitin, and caprolactone is also provided with a number of case studies (covering PHA-based products) along with a discussion on the prospects of food waste valorization approaches and their economic/technical viability.

We propose a three-dimensional (3D) imaging technique that can sense a 3D scene and computationally reconstruct it as a 3D volumetric image. Sensing of the 3D scene is carried out by obtaining elemental images optically using a pickup microlens array and a detector array. Reconstruction of volume pixels of the scene is accomplished by computationally simulating optical reconstruction according to ray optics. The entire pixels of the recorded elemental images contribute to volumetric reconstruction of the 3D scene. Image display planes at arbitrary distances from the display microlens array are computed and reconstructed by back propagating the elemental images through a computer synthesized pinhole array based on ray optics. We present experimental results of 3D image sensing and volume pixel reconstruction to test and verify the performance of the algorithm and the imaging system. The volume pixel values can be used for 3D image surface reconstruction.

Abstract The Geostationary Environment Monitoring Spectrometer (GEMS) is scheduled for launch in February 2020 to monitor air quality (AQ) at an unprecedented spatial and temporal resolution from a geostationary Earth orbit (GEO) for the first time. With the development of UV–visible spectrometers at sub-nm spectral resolution and sophisticated retrieval algorithms, estimates of the column amounts of atmospheric pollutants (O 3 , NO 2 , SO 2 , HCHO, CHOCHO, and aerosols) can be obtained. To date, all the UV–visible satellite missions monitoring air quality have been in low Earth orbit (LEO), allowing one to two observations per day. With UV–visible instruments on GEO platforms, the diurnal variations of these pollutants can now be determined. Details of the GEMS mission are presented, including instrumentation, scientific algorithms, predicted performance, and applications for air quality forecasts through data assimilation. GEMS will be on board the Geostationary Korea Multi-Purpose Satellite 2 (GEO-KOMPSAT-2) satellite series, which also hosts the Advanced Meteorological Imager (AMI) and Geostationary Ocean Color Imager 2 (GOCI-2). These three instruments will provide synergistic science products to better understand air quality, meteorology, the long-range transport of air pollutants, emission source distributions, and chemical processes. Faster sampling rates at higher spatial resolution will increase the probability of finding cloud-free pixels, leading to more observations of aerosols and trace gases than is possible from LEO. GEMS will be joined by NASA’s Tropospheric Emissions: Monitoring of Pollution (TEMPO) and ESA’s Sentinel-4 to form a GEO AQ satellite constellation in early 2020s, coordinated by the Committee on Earth Observation Satellites (CEOS).

Abstract As fast-charging lithium-ion batteries turn into increasingly important components in forthcoming applications, various strategies have been devoted to the development of high-rate anodes. However, despite vigorous efforts, the low initial Coulombic efficiency and poor volumetric energy density with insufficient electrode conditions remain critical challenges that have to be addressed. Herein, we demonstrate a hybrid anode via incorporation of a uniformly implanted amorphous silicon nanolayer and edge-site-activated graphite. This architecture succeeds in improving lithium ion transport and minimizing initial capacity losses even with increase in energy density. As a result, the hybrid anode exhibits an exceptional initial Coulombic efficiency (93.8%) and predominant fast-charging behavior with industrial electrode conditions. As a result, a full-cell demonstrates a higher energy density (≥1060 Wh l −1 ) without any trace of lithium plating at a harsh charging current density (10.2 mA cm −2 ) and 1.5 times faster charging than that of conventional graphite.

The intestine plays an essential role in integrating immunity and nutrient digestion and absorption. Adjacent intestinal epithelia form tight junctions (TJs) that are essential to the function of the physical intestinal barrier, regulating the paracellular movement of various substances including ions, solutes, and water across the intestinal epithelium. Studies have shown that TJ dysfunction is highly associated with metabolic and inflammatory diseases. Thus, molecular and nutritional factors that improve TJ activity have gained attention in the pharmaceutical and medicinal fields. This review focuses on the association between TJ and diverse pathological conditions, as well as various molecular and nutritional interventions designed to boost TJ integrity.

Self-repairable materials strive to emulate curable and resilient biological tissue; however, their performance is currently insufficient for commercialization purposes because mending and toughening are mutually exclusive. Herein, we report a carbonate-type thermoplastic polyurethane elastomer that self-heals at 35 °C and exhibits a tensile strength of 43 MPa; this elastomer is as strong as the soles used in footwear. Distinctively, it has abundant carbonyl groups in soft-segments and is fully amorphous with negligible phase separation due to poor hard-segment stacking. It operates in dual mechano-responsive mode through a reversible disorder-to-order transition of its hydrogen-bonding array; it heals when static and toughens when dynamic. In static mode, non-crystalline hard segments promote the dynamic exchange of disordered carbonyl hydrogen-bonds for self-healing. The amorphous phase forms stiff crystals when stretched through a transition that orders inter-chain hydrogen bonding. The phase and strain fully return to the pre-stressed state after release to repeat the healing process.

Oceans have borne most of the biological activities on our planet. A number of biologically active compounds with varying degrees of action, such as anti-tumor, anti-cancer, anti-microtubule, anti-proliferative, cytotoxic, photo protective, as well as antibiotic and antifouling properties, have been isolated to date from marine sources. The marine environment also represents a largely unexplored source for isolation of new microbes (bacteria, fungi, actinomycetes, microalgae-cyanobacteria and diatoms) that are potent producers of bioactive secondary metabolites. Extensive research has been done to unveil the bioactive potential of marine microbes (free living and symbiotic) and the results are amazingly diverse and productive. Some of these bioactive secondary metabolites of microbial origin with strong antibacterial and antifungal activities are being intensely used as antibiotics and may be effective against infectious diseases such as HIV, conditions of multiple bacterial infections (penicillin, cephalosporines, streptomycin, and vancomycin) or neuropsychiatric sequelae. Research is also being conducted on the general aspects of biophysical and biochemical properties, chemical structures and biotechnological applications of the bioactive substances derived from marine microorganisms, and their potential use as cosmeceuticals and nutraceuticals. This review is an attempt to consolidate the latest studies and critical research in this field, and to showcase the immense competence of marine microbial flora as bioactive metabolite producers. In addition, the present review addresses some effective and novel approaches of procuring marine microbial compounds utilizing the latest screening strategies of drug discovery.

Intrusion detection systems (IDSs) play a pivotal role in computer security by discovering and repealing malicious activities in computer networks. Anomaly-based IDS, in particular, rely on classification models trained using historical data to discover such malicious activities. In this paper, an improved IDS based on hybrid feature selection and two-level classifier ensembles are proposed. A hybrid feature selection technique comprising three methods, i.e., particle swarm optimization, ant colony algorithm, and genetic algorithm, is utilized to reduce the feature size of the training datasets (NSL-KDD and UNSW-NB15 are considered in this paper). Features are selected based on the classification performance of a reduced error pruning tree (REPT) classifier. Then, a two-level classifier ensemble based on two meta learners, i.e., rotation forest and bagging, is proposed. On the NSL-KDD dataset, the proposed classifier shows 85.8% accuracy, 86.8% sensitivity, and 88.0% detection rate, which remarkably outperform other classification techniques recently proposed in the literature. The results regarding the UNSW-NB15 dataset also improve the ones achieved by several state-of-the-art techniques. Finally, to verify the results, a two-step statistical significance test is conducted. This is not usually considered by the IDS research thus far and, therefore, adds value to the experimental results achieved by the proposed classifier.