Quaid-i-Azam University

The field of quantum optics has witnessed significant theoretical and experimental developments in recent years. This book provides an in-depth and wide-ranging introduction to the subject, emphasising throughout the basic principles and their applications. The book begins by developing the basic tools of quantum optics, and goes on to show the application of these tools in a variety of quantum optical systems, including lasing without inversion, squeezed states and atom optics. The final four chapters are devoted to a discussion of quantum optical tests of the foundations of quantum mechanics, and to particular aspects of measurement theory. Assuming only a background of standard quantum mechanics and electromagnetic theory, and containing many problems and references, this book will be invaluable to graduate students of quantum optics, as well as to researchers in this field.

In the twenty-first century, Machine learning is a hot trend procedure for handling the real-life problem. Several books and research articles are now available in literature on this topic. An intr...

Recently, iron oxide nanoparticles (NPs) have attracted much consideration due to their unique properties, such as superparamagnetism, surface-to-volume ratio, greater surface area, and easy separation methodology. Various physical, chemical, and biological methods have been adopted to synthesize magnetic NPs with suitable surface chemistry. This review summarizes the methods for the preparation of iron oxide NPs, size and morphology control, and magnetic properties with recent bioengineering, commercial, and industrial applications. Iron oxides exhibit great potential in the fields of life sciences such as biomedicine, agriculture, and environment. Nontoxic conduct and biocompatible applications of magnetic NPs can be enriched further by special surface coating with organic or inorganic molecules, including surfactants, drugs, proteins, starches, enzymes, antibodies, nucleotides, nonionic detergents, and polyelectrolytes. Magnetic NPs can also be directed to an organ, tissue, or tumor using an external magnetic field for hyperthermic treatment of patients. Keeping in mind the current interest in iron NPs, this review is designed to report recent information from synthesis to characterization, and applications of iron NPs.

Nanotechnology has recently gained increased attention for its capability to effectively diagnose and treat various tumors. Nanocarriers have been used to circumvent the problems associated with conventional antitumor drug delivery systems, including their nonspecificity, severe side effects, burst release and damaging the normal cells. Nanocarriers improve the bioavailability and therapeutic efficiency of antitumor drugs, while providing preferential accumulation at the target site. A number of nanocarriers have been developed; however, only a few of them are clinically approved for the delivery of antitumor drugs for their intended actions at the targeted sites. The present review is divided into three main parts: first part presents introduction of various nanocarriers and their relevance in the delivery of anticancer drugs, second part encompasses targeting mechanisms and surface functionalization on nanocarriers and third part covers the description of selected tumors, including breast, lungs, colorectal and pancreatic tumors, and applications of relative nanocarriers in these tumors. This review increases the understanding of tumor treatment with the promising use of nanotechnology.

Pictorial representation of all possible dye degradation reaction in UV light initiated indirect dye degradation mechanism. This mechanism is practically more important over visible light initiated direct mechanism.

The presence of heavy metals in the industrial effluents has recently been a challenging issue for human health. Efficient removal of heavy metal ions from environment is one of the most important issues from biological and environmental point of view, and many studies have been devoted to investigate the environmental behavior of nanoscale zerovalent iron (NZVI) for the removal of toxic heavy metal ions, present both in the surface and underground wastewater. The aim of this review is to show the excellent removal capacity and environmental remediation of NZVI-based materials for various heavy metal ions. A new look on NZVI-based materials (e.g., modified or matrix-supported NZVI materials) and possible interaction mechanism (e.g., adsorption, reduction and oxidation) and the latest environmental application. The effects of various environmental conditions (e.g., pH, temperature, coexisting oxy-anions and cations) and potential problems for the removal of heavy metal ions on NZVI-based materials with the DFT theoretical calculations and EXAFS technology are discussed. Research shows that NZVI-based materials have satisfactory removal capacities for heavy metal ions and play an important role in the environmental pollution cleanup. Possible improvement of NZVI-based materials and potential areas for future applications in environment remediation are also proposed.

BACKGROUND: The aim of this study was to screen various solvent extracts of whole plant of Torilis leptophylla to display potent antioxidant activity in vitro and in vivo, total phenolic and flavonoid contents in order to find possible sources for future novel antioxidants in food and pharmaceutical formulations. MATERIAL AND METHODS: A detailed study was performed on the antioxidant activity of the methanol extract of whole plant of Torilis leptophylla (TLM) and its derived fractions {n-hexane (TLH), chloroform (TLC) ethyl acetate (TLE) n-butanol (TLB) and residual aqueous fraction (TLA)} by in vitro chemical analyses and carbon tetrachloride (CCl4) induced hepatic injuries (lipid peroxidation and glutathione contents) in male Sprague-Dawley rat. The total yield, total phenolic (TPC) and total flavonoid contents (TFC) of all the fractions were also determined. TLM was also subjected to preliminary phytochemical screening test for various constituents. RESULTS: The total phenolic contents (TPC) (121.9±3.1 mg GAE/g extract) of TLM while total flavonoid contents (TFC) of TLE (60.9 ±2.2 mg RTE/g extract) were found significantly higher as compared to other solvent fractions. Phytochemical screening of TLM revealed the presence of alkaloids, anthraquinones, cardiac glycosides, coumarins, flavonoids, saponins, phlobatannins, tannins and terpenoids. The EC50 values based on the DPPH (41.0±1 μg/ml), ABTS (10.0±0.9 μg/ml) and phosphomolybdate (10.7±2 μg/ml) for TLB, hydroxyl radicals (8.0±1 μg/ml) for TLC, superoxide radicals (57.0±0.3 μg/ml) for TLM and hydrogen peroxide radicals (68.0±2 μg/ml) for TLE were generally lower showing potential antioxidant properties. A significant but marginal positive correlation was found between TPC and EC50 values for DPPH, hydroxyl, phosphomolybdate and ABTS, whereas another weak and positive correlation was determined between TFC and EC50 values for superoxide anion and hydroxyl radicals. Results of in vivo experiment revealed that administration of CCl4 caused a significant increase in lipid peroxidation (TBARS) while decrease in GSH contents of liver. In contrast, TLM (200 mg/kg bw) and silymarin (50 mg/kg bw) co-treatment effectively prevented these alterations and maintained the antioxidant status. CONCLUSION: Data from present results revealed that Torilis leptophylla act as an antioxidant agent due to its free radical scavenging and cytoprotective activity.

Capping agents are of utmost importance as stabilizers that inhibit the over-growth of nanoparticles and prevent their aggregation/coagulation in colloidal synthesis. The capping ligands stabilize the interface where nanoparticles interact with their medium of preparation. Specific structural features of nanoparticles are attributed to capping on their surface. These stabilizing agents play a key role in altering the biological activities and environmental perspective. Stearic effects of capping agents adsorbed on the surface of nanoparticles are responsible for such changing physico-chemical and biological characteristics. Firstly, this novel review article introduces few frequently used capping agents in the fabrication of nanoparticles. Next, recent advancements in biomedicine and environmental remediation approaches of capped nanoparticles have been elaborated. Lastly, future directions of the huge impact of capping agents on the biological environment have been summarized.

can be exploited as potential candidates for biomedical and environmental applications.

Drought stress, which causes a decline in quality and quantity of crop yields, has become more accentuated these days due to climatic change. Serious measures need to be taken to increase the tolerance of crop plants to acute drought conditions likely to occur due to global warming. Drought stress causes many physiological and biochemical changes in plants, rendering the maintenance of osmotic adjustment highly crucial. The degree of plant resistance to drought varies with plant species and cultivars, phenological stages of the plant, and the duration of plant exposure to the stress. Osmoregulation in plants under low water potential relies on synthesis and accumulation of osmoprotectants or osmolytes such as soluble proteins, sugars, and sugar alcohols, quaternary ammonium compounds, and amino acids, like proline. This review highlights the role of osmolytes in water-stressed plants and of enzymes entailed in their metabolism. It will be useful, especially for researchers working on the development of drought-resistant crops by using the metabolic-engineering techniques.

Abstract The 15 yr pulsar timing data set collected by the North American Nanohertz Observatory for Gravitational Waves (NANOGrav) shows positive evidence for the presence of a low-frequency gravitational-wave (GW) background. In this paper, we investigate potential cosmological interpretations of this signal, specifically cosmic inflation, scalar-induced GWs, first-order phase transitions, cosmic strings, and domain walls. We find that, with the exception of stable cosmic strings of field theory origin, all these models can reproduce the observed signal. When compared to the standard interpretation in terms of inspiraling supermassive black hole binaries (SMBHBs), many cosmological models seem to provide a better fit resulting in Bayes factors in the range from 10 to 100. However, these results strongly depend on modeling assumptions about the cosmic SMBHB population and, at this stage, should not be regarded as evidence for new physics. Furthermore, we identify excluded parameter regions where the predicted GW signal from cosmological sources significantly exceeds the NANOGrav signal. These parameter constraints are independent of the origin of the NANOGrav signal and illustrate how pulsar timing data provide a new way to constrain the parameter space of these models. Finally, we search for deterministic signals produced by models of ultralight dark matter (ULDM) and dark matter substructures in the Milky Way. We find no evidence for either of these signals and thus report updated constraints on these models. In the case of ULDM, these constraints outperform torsion balance and atomic clock constraints for ULDM coupled to electrons, muons, or gluons.

We present here a quantum Carnot engine in which the atoms in the heat bath are given a small bit of quantum coherence. The induced quantum coherence becomes vanishingly small in the high-temperature limit at which we operate and the heat bath is essentially thermal. However, the phase phi, associated with the atomic coherence, provides a new control parameter that can be varied to increase the temperature of the radiation field and to extract work from a single heat bath. The deep physics behind the second law of thermodynamics is not violated; nevertheless, the quantum Carnot engine has certain features that are not possible in a classical engine.

Medical imaging is the process of visual representation of different tissues and organs of the human body to monitor the normal and abnormal anatomy and physiology of the body. There are many medical imaging techniques used for this purpose such as X-ray, computed tomography (CT), positron emission tomography (PET), magnetic resonance imaging (MRI), single-photon emission computed tomography (SPECT), digital mammography, and diagnostic sonography. These advanced medical imaging techniques have many applications in the diagnosis of myocardial diseases, cancer of different tissues, neurological disorders, congenital heart disease, abdominal illnesses, complex bone fractures, and other serious medical conditions. There are benefits as well as some risks to every imaging technique. There are some steps for minimizing the radiation exposure risks from imaging techniques. Advance medical imaging modalities such as PET/CT hybrid, three-dimensional ultrasound computed tomography (3D USCT), and simultaneous PET/MRI give high resolution, better reliability, and safety to diagnose, treat, and manage complex patient abnormalities. These techniques ensure the production of new accurate imaging tools with improving resolution, sensitivity, and specificity. In the future, with mounting innovations and advancements in technology systems, the medical diagnostic field will become a field of regular measurement of various complex diseases and will provide healthcare solutions.

Combined results are reported from searches for the standard model Higgs boson in proton-proton collisions at s = 7 TeV in five Higgs boson decay modes: , bb, , WW, and ZZ. The explored Higgs boson mass range is 110-600 GeV. The analysed data correspond to an integrated luminosity of 4.6-4.8 fb -1 . The expected excluded mass range in the absence of the standard model Higgs boson is 118-543 GeV at 95% CL. The observed results exclude the standard model Higgs boson in the mass range 127-600 GeV at 95% CL, and in the mass range 129-525 GeV at 99% CL. An excess of events above the expected standard model background is observed at the low end of the explored mass range making the observed limits weaker than expected in the absence of a signal. The largest excess, with a local significance of 3.1 , is observed for a Higgs boson mass hypothesis of 124 GeV. The global significance of observing an excess with a local significance 3.1 anywhere in the search range 110-600 (110-145) GeV is estimated to be 1.5 (2.1 ). More data are required to ascertain the origin of the observed excess.

Zerovalent copper nanoparticles (Cu0) of 12 nm size were synthesized using an inert gas condensation method in which bulk copper metal was evaporated into an inert environment of argon with subsequent cooling for nucleation and growth of nanoparticles. Crystalline structure, morphology and estimation of size of nanoparticles were carried out by X-ray diffraction and transmission electron microscopy. The antibacterial activity of these nanoparticles against the Gram-negative bacterium Escherichia coli was assessed in liquid as well as solid growth media. It was observed from scanning electron microscopic analysis that the interaction of copper nanoparticles with E. coli resulted in the formation of cavities/pits in the bacterial cell wall. The antibacterial property of copper nanoparticles was attributed mainly to adhesion with bacteria because of their opposite electrical charges, resulting in a reduction reaction at the bacterial cell wall. Nanoparticles with a larger surface-to-volume ratio provide more efficient means for antibacterial activity.

Cancer is a frightful disease and represents one of the biggest health-care issues for the human race and demands a proactive strategy for cure. Plants are reservoirs for novel chemical entities and provide a promising line for research on cancer. Hitherto, being effective, chemotherapy is accompanied by certain unbearable side effects. Nevertheless, plants and plant derived products is a revolutionizing field as these are Simple, safer, eco-friendly, low-cost, fast, and less toxic as compared with conventional treatment methods. Phytochemicals are selective in their functions and acts specifically on tumor cells without affecting normal cells. Carcinogenesis is complex phenomena that involves many signaling cascades. Phytochemicals are considered suitable candidates for anticancer drug development due to their pleiotropic actions on target events with multiple manners. The research is in progress for developing potential candidates (those can block or slow down the growth of cancer cells without any side effects) from these phytochemicals. Many phytochemicals and their derived analogs have been identified as potential candidates for anticancer therapy. Effort has been made through this comprehensive review to highlight the recent developments and milestones achieved in cancer therapies using phytomolecules with their mechanism of action on nuclear and cellular factors. Furthermore, drugs for cancer treatment and their limitations have also been discussed.

There is a continuing need for the development of effective, cheap and environmentally friendly processes for the disinfection and degradation of organic pollutants from water. Ozonation processes are now replacing conventional chlorination processes because ozone is a stronger oxidizing agent and a more effective disinfectant without any side effects. However, the fact that the cost of ozonation processes is higher than chlorination processes is their main disadvantage. In this paper recent developments targeted to make ozonation processes cheaper by improving the efficiency of ozone generation, for example, by incorporation of catalytic packing in the ozone generator, better dispersion of ozone in water and faster conversion of dissolved ozone to free radicals are described. The synthesis of ozone in electrical discharges is discussed. Furthermore, the generation and plasma chemical reactions of several chemically active species, such as H2O2, O•, OH•, HO2•, O3*, N2*, e-, O2-, O-, O2+, etc, which are produced in the electrical discharges are described. Most of these species are stronger oxidizers than ozone. Therefore, water treatment by direct electrical discharges may provide a means to utilize these species in addition to ozone. Much research and development activity has been devoted to achieve these targets in the recent past. An overview of these techniques and important developments that have taken place in this area are discussed. In particular, pulsed corona discharge, dielectric barrier discharge and contact glow discharge electrolysis techniques are being studied for the purpose of cleaning water. The units based on electrical discharges in water or close to the water level are being tested at industrial-scale water treatment plants.}

Nanofluids are of great importance to researchers as they have significant uses industrially due to their high heat transfer rates. Recently, a new class of nanofluid, “hybrid nanofluid” is being used to further enhance the heat transfer rate. This new model in 3D is employed to examine the impact of thermal radiation, heat generation and chemical reaction over stretching sheet in the presence of rotation. It is concluded from the current research that even in the presence of radiation, heat generation and chemical reaction the heat transfer rate of Hybrid nanofluid is higher than the simple nanofluid.

Though much progress has been made in drug delivery systems, the design of a suitable carrier for the delivery of hydrophobic drugs is still a major challenge for researchers.

Nanoparticles typically have dimensions of less than 100 nm. Scientists around the world have recently become interested in nanotechnology because of its potential applications in a wide range of fields, including catalysis, gas sensing, renewable energy, electronics, medicine, diagnostics, medication delivery, cosmetics, the construction industry, and the food industry. The sizes and forms of nanoparticles (NPs) are the primary determinants of their properties. Nanoparticles’ unique characteristics may be explored for use in electronics (transistors, LEDs, reusable catalysts), energy (oil recovery), medicine (imaging, tumor detection, drug administration), and more. For the aforementioned applications, the synthesis of nanoparticles with an appropriate size, structure, monodispersity, and morphology is essential. New procedures have been developed in nanotechnology that are safe for the environment and can be used to reliably create nanoparticles and nanomaterials. This research aims to illustrate top-down and bottom-up strategies for nanomaterial production, and numerous characterization methodologies, nanoparticle features, and sector-specific applications of nanotechnology.