South Valley University

Organometal halide perovskite-based solar cells have recently been reported to be highly efficient, giving an overall power conversion efficiency of up to 15%. However, much of the fundamental photophysical properties underlying this performance has remained unknown. Here, we apply photoluminescence, transient absorption, time-resolved terahertz and microwave conductivity measurements to determine the time scales of generation and recombination of charge carriers as well as their transport properties in solution-processed CH3NH3PbI3 perovskite materials. We found that electron-hole pairs are generated almost instantaneously after photoexcitation and dissociate in 2 ps forming highly mobile charges (25 cm(2) V(-1) s(-1)) in the neat perovskite and in perovskite/alumina blends; almost balanced electron and hole mobilities remain very high up to the microsecond time scale. When the perovskite is introduced into a TiO2 mesoporous structure, electron injection from perovskite to the metal oxide is efficient in less than a picosecond, but the lower intrinsic electron mobility of TiO2 leads to unbalanced charge transport. Microwave conductivity measurements showed that the decay of mobile charges is very slow in CH3NH3PbI3, lasting up to tens of microseconds. These results unravel the remarkable intrinsic properties of CH3NH3PbI3 perovskite material if used as light absorber and charge transport layer. Moreover, finding a metal oxide with higher electron mobility may further increase the performance of this class of solar cells.

Abstract Dihydrogen (H 2 ), commonly named ‘hydrogen’, is increasingly recognised as a clean and reliable energy vector for decarbonisation and defossilisation by various sectors. The global hydrogen demand is projected to increase from 70 million tonnes in 2019 to 120 million tonnes by 2024. Hydrogen development should also meet the seventh goal of ‘affordable and clean energy’ of the United Nations. Here we review hydrogen production and life cycle analysis, hydrogen geological storage and hydrogen utilisation. Hydrogen is produced by water electrolysis, steam methane reforming, methane pyrolysis and coal gasification. We compare the environmental impact of hydrogen production routes by life cycle analysis. Hydrogen is used in power systems, transportation, hydrocarbon and ammonia production, and metallugical industries. Overall, combining electrolysis-generated hydrogen with hydrogen storage in underground porous media such as geological reservoirs and salt caverns is well suited for shifting excess off-peak energy to meet dispatchable on-peak demand.

A feeding trial was conducted to investigate the effects of dietary supplementations of synbiotic and probiotic on broiler performance, carcass yield, organs weights, and histomorphological measurements of small intestine. Six hundred 1-d-old broiler chicks were randomly assigned to 1 of 3 dietary treatments for 5 wk. The dietary treatments were 1) control, 2) basal diets supplemented with synbiotic (1 kg of Biomin IMBO/ ton of the starter diets and 0.5 kg/ton of the grower diets), 3) basal diets supplemented with probiotic (1 kg of a homofermentative and a heterofermentative Lacto-bacillus sp./ton of feed). The BW, average daily weight gain, carcass yield percentage, and feed conversion rate were significantly (P < 0.05) increased by the dietary inclusion of the synbiotic compared with the control and probiotic-fed broilers. Moreover, a slight improvement in performance traits was observed in broilers fed the probiotic compared with control birds. The absolute and relative weight of spleen and thymus tended to be greater (P < 0.1) for the probiotic-supplemented group compared with the synbiotic-supplemented group. The relative liver weight was greater (P < 0.05) for probiotic-fed birds compared with synbiotic-fed birds. Additionally, the weight of small intestine was greater for either probiotic- (3.17) or synbiotic-fed birds (3.11) than the controls (2.89). Furthermore, dietary treatments influenced the histomorphological measurements of small intestinal villi. The addition of either probiotic or synbiotic increased (P < 0.05) the villus height:crypt depth ratio and villus height in both duodenum and ileum. The duodenal crypt depth remained unaffected (P > 0.05). However, the ileal crypt depth was decreased by dietary supplementations compared with control. In conclusion, synbiotic or probiotic displayed a greater efficacy as growth promoters for broilers. Furthermore, the dietary supplementations resulted in an increase in the villus height and crypt depth of intestinal mucosa of broilers. The increase in the villus height and villus height:crypt depth ratio was associated with improvement of growth performance for both synbiotic and probiotic. This indicates that the synbiotic and probiotic can be used as a growth promoter in broiler diets and can improve the gut health. These products show promising effects as alternatives for antibiotics as pressure to eliminate growth-promotant antibiotic use increases.

Abstract Human activities have led to a massive increase in $$\hbox {CO}_{2}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:msub> <mml:mtext>CO</mml:mtext> <mml:mn>2</mml:mn> </mml:msub> </mml:math> emissions as a primary greenhouse gas that is contributing to climate change with higher than $$1\,^{\circ }\hbox {C}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:mrow> <mml:mn>1</mml:mn> <mml:msup> <mml:mspace/> <mml:mo>∘</mml:mo> </mml:msup> <mml:mtext>C</mml:mtext> </mml:mrow> </mml:math> global warming than that of the pre-industrial level. We evaluate the three major technologies that are utilised for carbon capture: pre-combustion, post-combustion and oxyfuel combustion. We review the advances in carbon capture, storage and utilisation. We compare carbon uptake technologies with techniques of carbon dioxide separation. Monoethanolamine is the most common carbon sorbent; yet it requires a high regeneration energy of 3.5 GJ per tonne of $$\hbox {CO}_{2}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:msub> <mml:mtext>CO</mml:mtext> <mml:mn>2</mml:mn> </mml:msub> </mml:math> . Alternatively, recent advances in sorbent technology reveal novel solvents such as a modulated amine blend with lower regeneration energy of 2.17 GJ per tonne of $$\hbox {CO}_{2}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:msub> <mml:mtext>CO</mml:mtext> <mml:mn>2</mml:mn> </mml:msub> </mml:math> . Graphene-type materials show $$\hbox {CO}_{2}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:msub> <mml:mtext>CO</mml:mtext> <mml:mn>2</mml:mn> </mml:msub> </mml:math> adsorption capacity of 0.07 mol/g, which is 10 times higher than that of specific types of activated carbon, zeolites and metal–organic frameworks. $$\hbox {CO}_{2}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:msub> <mml:mtext>CO</mml:mtext> <mml:mn>2</mml:mn> </mml:msub> </mml:math> geosequestration provides an efficient and long-term strategy for storing the captured $$\hbox {CO}_{2}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:msub> <mml:mtext>CO</mml:mtext> <mml:mn>2</mml:mn> </mml:msub> </mml:math> in geological formations with a global storage capacity factor at a Gt-scale within operational timescales. Regarding the utilisation route, currently, the gross global utilisation of $$\hbox {CO}_{2}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:msub> <mml:mtext>CO</mml:mtext> <mml:mn>2</mml:mn> </mml:msub> </mml:math> is lower than 200 million tonnes per year, which is roughly negligible compared with the extent of global anthropogenic $$\hbox {CO}_{2}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:msub> <mml:mtext>CO</mml:mtext> <mml:mn>2</mml:mn> </mml:msub> </mml:math> emissions, which is higher than 32,000 million tonnes per year. Herein, we review different $$\hbox {CO}_{2}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:msub> <mml:mtext>CO</mml:mtext> <mml:mn>2</mml:mn> </mml:msub> </mml:math> utilisation methods such as direct routes, i.e. beverage carbonation, food packaging and oil recovery, chemical industries and fuels. Moreover, we investigated additional $$\hbox {CO}_{2}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:msub> <mml:mtext>CO</mml:mtext> <mml:mn>2</mml:mn> </mml:msub> </mml:math> utilisation for base-load power generation, seasonal energy storage, and district cooling and cryogenic direct air $$\hbox {CO}_{2}$$ <mml:math xmlns:mml="http://www.w3.org/1998/Math/MathML"> <mml:msub> <mml:mtext>CO</mml:mtext> <mml:mn>2</mml:mn> </mml:msub> </mml:math> capture using geothermal energy. Through bibliometric mapping, we identified the research gap in the literature within this field which requires future investigations, for instance, designing new and stable ionic liquids, pore size and selectivity of metal–organic frameworks and enhancing the adsorption capacity of novel solvents. Moreover, areas such as techno-economic evaluation of novel solvents, process design and dynamic simulation require further effort as well as research and development before pilot- and commercial-scale trials.

Abstract Nanomaterials have been rapidly developed during the last decades, yet many nanoparticles synthesized by classical methods are toxic and their synthesis procedure is not sustainable. Here we review the green synthesis of nanoparticles from biomass and waste with a focus on synthetic mechanisms and applications in energy production and storage, medicine, environmental remediation, and agriculture and food. Biomass use for synthesis include microorganisms, fungi, plants, and agro-industrial bio-waste. Compared to conventional synthesis, green synthesis allows a 30% reduction in energy consumption, cost savings of up to 40%, and a 50% increase in production output. Biomedical applications comprise antibacterials, anticancers, antioxidants, and drug delivery mechanisms. Carbon quantum dots and photovoltaics are discussed in the energy section. Agricultural and food applications focus on nanofertilization, pest control, and food quality. Environmental remediation includes water and soil purification.

This work was designed to evaluate whether external application of nitric oxide (NO) in the form of its donor S-nitroso-N-acetylpenicillamine (SNAP) could mitigate the deleterious effects of NaCl stress on chickpea (Cicer arietinum L.) plants. SNAP (50 μM) was applied to chickpea plants grown under non-saline and saline conditions (50 and 100 mM NaCl). Salt stress inhibited growth and biomass yield, leaf relative water content (LRWC) and chlorophyll content of chickpea plants. High salinity increased electrolyte leakage, carotenoid content and the levels of osmolytes (proline, glycine betaine, soluble proteins and soluble sugars), hydrogen peroxide (H2O2) and malondialdehyde (MDA), as well as the activities of antioxidant enzymes, such as superoxide dismutase (SOD), catalase (CAT), ascorbate peroxidase (APX), and glutathione reductase in chickpea plants. Expression of the representative SOD, CAT and APX genes examined was also up-regulated in chickpea plants by salt stress. On the other hand, exogenous application of NO to salinized plants enhanced the growth parameters, LRWC, photosynthetic pigment production and levels of osmolytes, as well as the activities of examined antioxidant enzymes which is correlated with up-regulation of the examined SOD, CAT and APX genes, in comparison with plants treated with NaCl only. Furthermore, electrolyte leakage, H2O2 and MDA contents showed decline in salt-stressed plants supplemented with NO as compared with those in NaCl-treated plants alone. Thus, the exogenous application of NO protected chickpea plants against salt stress-induced oxidative damage by enhancing the biosyntheses of antioxidant enzymes, thereby improving plant growth under saline stress. Taken together, our results demonstrate that NO has capability to mitigate the adverse effects of high salinity on chickpea plants by improving LRWC, photosynthetic pigment biosyntheses, osmolyte accumulation and antioxidative defense system.

Several Avian paramyxoviruses 1 (synonymous with Newcastle disease virus or NDV, used hereafter) classification systems have been proposed for strain identification and differentiation. These systems pioneered classification efforts; however, they were based on different approaches and lacked objective criteria for the differentiation of isolates. These differences have created discrepancies among systems, rendering discussions and comparisons across studies difficult. Although a system that used objective classification criteria was proposed by Diel and co-workers in 2012, the ample worldwide circulation and constant evolution of NDV, and utilization of only some of the criteria, led to identical naming and/or incorrect assigning of new sub/genotypes. To address these issues, an international consortium of experts was convened to undertake in-depth analyses of NDV genetic diversity. This consortium generated curated, up-to-date, complete fusion gene class I and class II datasets of all known NDV for public use, performed comprehensive phylogenetic neighbor-Joining, maximum-likelihood, Bayesian and nucleotide distance analyses, and compared these inference methods. An updated NDV classification and nomenclature system that incorporates phylogenetic topology, genetic distances, branch support, and epidemiological independence was developed. This new consensus system maintains two NDV classes and existing genotypes, identifies three new class II genotypes, and reduces the number of sub-genotypes. In order to track the ancestry of viruses, a dichotomous naming system for designating sub-genotypes was introduced. In addition, a pilot dataset and sub-trees rooting guidelines for rapid preliminary genotype identification of new isolates are provided. Guidelines for sequence dataset curation and phylogenetic inference, and a detailed comparison between the updated and previous systems are included. To increase the speed of phylogenetic inference and ensure consistency between laboratories, detailed guidelines for the use of a supercomputer are also provided. The proposed unified classification system will facilitate future studies of NDV evolution and epidemiology, and comparison of results obtained across the world.

Maintaining a healthy gut environment is a prerequisite for sustainable animal production. The gut plays a key role in the digestion and absorption of nutrients and constitutes an initial organ exposed to external factors influencing bird’s health. The intestinal epithelial barrier serves as the first line of defense between the host and the luminal environment. It consists of a continuous monolayer of intestinal epithelial cells connected by intercellular junctional complexes which shrink the space between adjacent cells. Consequently, free passing of solutes and water via the paracellular pathway is prevented. Tight junctions (TJs) are multi-protein complexes which are crucial for the integrity and function of the epithelial barrier as they not only link cells but also form channels allowing permeation between cells, resulting in epithelial surfaces of different tightness. Tight junction’s molecular composition, ultrastructure, and function are regulated differently with regard to physiological and pathological stimuli. Both in vivo and in vitro studies suggest that reduced tight junction integrity greatly results in a condition commonly known as “leaky gut”. A loss of barrier integrity allows the translocation of luminal antigens (microbes, toxins) via the mucosa to access the whole body which are normally excluded and subsequently destroys the gut mucosal homeostasis, coinciding with an increased susceptibility to systemic infection, chronic inflammation and malabsorption. There is considerable evidence that the intestinal barrier dysfunction is an important factor contributing to the pathogenicity of some enteric bacteria. It has been shown that some enteric pathogens can induce permeability defects in gut epithelia by altering tight junction proteins, mediated by their toxins. Resolving the strategies that microorganisms use to hijack the functions of tight junctions is important for our understanding of microbial pathogenesis, because some pathogens can utilize tight junction proteins as receptors for attachment and subsequent internalization, while others modify or destroy the tight junction proteins by different pathways and thereby provide a gateway to the underlying tissue. This review aims to deliver an overview of the tight junction structures and function, and its role in enteric bacterial pathogenesis with a special focus on chickens. A main conclusion will be that the molecular mechanisms used by enteric pathogens to disrupt epithelial barrier function in chickens needs a much better understanding, explicitly highlighted for Campylobacter jejuni, Salmonella enterica and Clostridium perfringens. This is a requirement in order to assist in discovering new strategies to avoid damages of the intestinal barrier or to minimize consequences from infections.

Abstract Soil salinity is established as one of the major environmental problems, decreasing crop productivity worldwide, thereby threatening sustainable agriculture. In the present study, we evaluated the effects of titanium dioxide nanoparticles (nTiO 2 ) for ameliorating soil salinity in broad bean, an important leguminous crop. As nTiO 2 is known to have pro‐oxidant and antioxidant properties, the effects of three different nTiO 2 concentrations (0·01%, 0·02% and 0·03%) were compared with respect to plant growth and stress responses. The 0·01% nTiO 2 application significantly increased shoot length, leaf area and root dry weight of plants under normal conditions. These growth‐promoting effects were simultaneous with increased levels of chlorophyll b, soluble sugars and proline and enhanced activities of antioxidant enzymes. Under saline soil conditions, although proline level and enzymatic antioxidant activities were increased, plant growth significantly reduced. The 0·01% nTiO 2 supplementation significantly increased the activities of enzymatic antioxidants and levels of soluble sugars, amino acids and proline in salt‐affected plants versus plants subjected to salinity alone. Thus, the increased antioxidant enzyme activities contributed to the observed reduction in hydrogen peroxide and malondialdehyde contents, while enhanced levels of proline and other metabolites contributed to osmoprotection, collectively resulting in significant plant growth improvement under salinity. Furthermore, nTiO 2 ‐mediated positive effects were concentration dependent with 0·01% nTiO 2 being the most effective, whereas 0·02% showed an intermediate response and 0·03% was almost ineffective under both control and saline soil conditions. Our findings provide a foundation for nTiO 2 application in improving growth of plants cultivated on naturally contaminated saline soils. Copyright © 2017 John Wiley &amp; Sons, Ltd.

The poultry industry contributes significantly to bridging the nutritional gap in many countries because of its meat and eggs products rich in protein and valuable nutrients at a cost less than other animal meat sources. The natural antibiotics alternatives including probiotics, prebiotics, symbiotics, organic acids, essential oils, enzymes, immunostimulants, and phytogenic (phytobiotic) including herbs, botanicals, essential oils, and oleoresins are the most common feed additives that acquire popularity in poultry industry following the ban of antibiotic growth promoters (AGPs). They are commonly used worldwide because of their unique properties and positive impact on poultry production. They can be easily mixed with other feed ingredients, have no tissue residues, improve feed intake, feed gain, feed conversion rate, improve bird immunity, improve digestion, increase nutrients availability as well as absorbability, have antimicrobial effects, do not affect carcass characters, decrease the usage of antibiotics, acts as antioxidants, anti-inflammatory, compete for stress factors and provide healthy organic products for human consumption. Therefore, the current review focuses on a comprehensive description of different natural antibiotic growth promoters' alternatives, the mode of their action, and their impacts on poultry production.

In this review we develop the argument that cholestatic liver diseases, particularly primary biliary cholangitis and primary sclerosing cholangitis (PSC), evolve over time with anatomically an ascending course of the disease process. The first and early lesions are in "downstream" bile ducts. This eventually leads to cholestasis, and this causes bile salt (BS)-mediated toxic injury of the "upstream" liver parenchyma. BS are toxic in high concentration. These concentrations are present in the canalicular network, bile ducts, and gallbladder. Leakage of bile from this network and ducts could be an important driver of toxicity. The liver has a great capacity to adapt to cholestasis, and this may contribute to a variable symptom-poor interval that is often observed. Current trials with drugs that target BS toxicity are effective in only about 50%-60% of primary biliary cholangitis patients, with no effective therapy in PSC. This motivated us to develop and propose a new view on the pathophysiology of primary biliary cholangitis and PSC in the hope that these new drugs can be used more effectively. These views may lead to better stratification of these diseases and to recommendations on a more "tailored" use of the new therapeutic agents that are currently tested in clinical trials. Apical sodium-dependent BS transporter inhibitors that reduce intestinal BS absorption lower the BS load and are best used in cholestatic patients. The effectiveness of BS synthesis-suppressing drugs, such as farnesoid X receptor agonists, is greatest when optimal adaptation is not yet established. By the time cytochrome P450 7A1 expression is reduced these drugs may be less effective. Anti-inflammatory agents are probably most effective in early disease, while drugs that antagonize BS toxicity, such as ursodeoxycholic acid and nor-ursodeoxycholic acid, may be effective at all disease stages. Endoscopic stenting in PSC should be reserved for situations of intercurrent cholestasis and cholangitis, not for cholestasis in end-stage disease. These are arguments to consider a step-wise pathophysiology for these diseases, with therapy adjusted to disease stage. An obstacle in such an approach is that disease stage-defining biomarkers are still lacking. This review is meant to serve as a call to prioritize the development of biomarkers that help to obtain a better stratification of these diseases. (Hepatology 2017;65:722-738).

In recent years, attention has been drawn to battery thermal safety issues due to the importance of personal safety and vehicle service security. The latest advancements in battery thermal management (BTM) are conducted to face the expected challenges to ensure battery safety. The BTM technology enhances battery safety with a heat transfer intensifying method, which guarantees the battery operation performance based on the battery's thermokinetic, electrochemical, and mechanical characteristics at normal and abnormal operating conditions. Preventing overheating and providing an ideal working temperature for safe operation are also important. Therefore, developing a BTM system that is both safe and reliable has a vital research goal. A comprehensive review of BTM with enhanced safety is presented in this article. The present study introduces the advances in the applications of BTM with cyclic stability served, high energy density, and electrification of automobiles. A summary of relevant research is also provided to improve thermo-safe design innovation and cooperative optimization to meet the needs of green-energy vehicle commercialization. The current work discusses the applications of air, liquid, nanofluids, phase change material, heat pipe, and combinations of these technics for BTM. Finally, the current study describes the challenges and prospects for utilizing different types of BTM to distribute its technology for diverse applications. The present study shows that proper thermal management system (TMS) is required to increase the batteries' efficiency and lifetime. However, each TMS has its characteristics that differ from one to one. Therefore, the proposed TMS's configuration and optimum performance must be examined before real application.

Abstract The ever-increasing world energy demand drives the need for new and sustainable renewable fuel to mitigate problems associated with greenhouse gas emissions such as climate change. This helps in the development toward decarbonisation. Thus, in recent years, hydrogen has been seen as a promising candidate in global renewable energy agendas, where the production of biohydrogen gains more attention compared with fossil-based hydrogen. In this review, biohydrogen production using organic waste materials through fermentation, biophotolysis, microbial electrolysis cell and gasification are discussed and analysed from a technological perspective. The main focus herein is to summarise and criticise through bibliometric analysis and put forward the guidelines for the potential future routes of biohydrogen production from biomass and especially organic waste materials. This research review claims that substantial efforts currently and, in the future, should focus on biohydrogen production from integrated technology of processes of (i) dark and photofermentation, (ii) microbial electrolysis cell (MEC) and (iii) gasification of combined different biowastes. Furthermore, bibliometric mapping shows that hydrogen production from biomethanol and the modelling process are growing areas in the biohydrogen research that lead to zero-carbon energy soon.

Silicon (Si) has been known to augment plant defense against biotic and abiotic pressures. Maize (Zea maize L.) is classified as a Si accumulator and is relatively susceptible to alkaline stress. In this study, seeds of maize were grown in pots and exposed to various concentrations of Na2CO3 (0, 25, 50, and 75 mM) with or without 1.5 mM Si in the form of sodium metasilicate Na2O3Si.5H2O for 25 days. Alkaline-stressed plants showed a decrease in growth parameters, leaf relative water content (LRWC), and the contents of photosynthetic pigments, soluble sugars, total phenols and potassium ion (K(+)), as well as potassium/sodium ion (K(+)/Na(+)) ratio. By contrast, alkaline stress increased the contents of soluble proteins, total free amino acids, proline, Na(+) and malondialdehyde (MDA), as well as the activities of superoxide dismutase (SOD), catalase (CAT), and peroxidase (POD) in stressed plants. On the other hand, application of Si by seed-priming improved growth of stressed plants, which was accompanied by the enhancement in LRWC, and levels of photosynthetic pigments, soluble sugars, soluble proteins, total free amino acids and K(+), as well as activities of SOD, CAT, and POD enzymes. Furthermore, Si supplement resulted in a decrease in the contents of proline, MDA and Na(+), which together with enhanced K(+) level led to a favorable adjustment of K(+)/Na(+) ratio, in stressed plants relative to plants treated with alkaline stress alone. Taken together, these results indicate that Si plays a pivotal role in alleviating the negative effects of alkaline stress on maize growth by improving water status, enhancing photosynthetic pigments, accumulating osmoprotectants rather than proline, activating the antioxidant machinery, and maintaining the balance of K(+)/Na(+) ratio. Thus, our findings demonstrate that seed-priming with Si is an efficient strategy that can be used to boost tolerance of maize plants to alkaline stress.

Many universities and colleges worldwide suspended classroom teaching due to the novel coronavirus pandemic and switched to online teaching. The current cross-sectional study was carried out to analyze the impact of COVID-19 lockdown on the academic performance of veterinary medical students and researchers. Veterinary medical students and researchers were invited to answer an online google form questionnaire. A total of 1,392 participants were from 92 different countries answered the questionnaire with response rate of 94.1%. The data showed that COVID-19 pandemic lockdown affected the academic performance of most participants (96.7%) with varying degrees. The mean evaluation score for the online education in general was 5.1 ± 2.4 while that for the practical parts was 3.6 ± 2.6. Although online education provides an opportunity for self-study, the main challenge that online education faces in veterinary medical science is how to give practical lessons. Since most of the subjects are practical; therefore, it is not easy to learn it online. Students think that it is difficult to fulfill the veterinary competencies only with online education system. Online education could be improved by making it more interactive, showing medical procedures in real situations, giving concise information, and providing 3D virtual tools to mimic the real situation.

Vehicle detection and tracking play an important role in autonomous vehicles and intelligent transportation systems. Adverse weather conditions such as the presence of heavy snow, fog, rain, dust or sandstorm situations are dangerous restrictions on camera’s function by reducing visibility, affecting driving safety. Indeed, these restrictions impact the performance of detection and tracking algorithms utilized in the traffic surveillance systems and autonomous driving applications. In this article, we start by proposing a visibility enhancement scheme consisting of three stages: illumination enhancement, reflection component enhancement, and linear weighted fusion to improve the performance. Then, we introduce a robust vehicle detection and tracking approach using a multi-scale deep convolution neural network. The conventional Gaussian mixture probability hypothesis density filter based tracker is utilized jointly with hierarchical data associations (HDA), which splits into detection-to-track and track-to-track associations. Herein, the cost matrix of each phase is solved using the Hungarian algorithm to compensate for the lost tracks caused by missed detection. Only detection information (i.e., bounding boxes with detection scores) is used in HDA without visual features information for rapid execution. We have also introduced a novel benchmarking dataset designed for research in applications of autonomous vehicles under adverse weather conditions called DAWN. It consists of real-world images collected with different types of adverse weather conditions. The proposed method is tested on DAWN, KITTI, and MS-COCO datasets and compared with 21 vehicle detectors. Experimental results have validated effectiveness of the proposed method which outperforms state-of-the-art vehicle detection and tracking approaches under adverse weather conditions.

Characteristics of nanoscale materials are often different from the corresponding bulk properties providing new, sometimes unexpected, opportunities for applications. Here we investigate the properties of 8 nm colloidal nanoparticles of MAPbBr3 perovskites and contrast them to the ones of large microcrystallites representing a bulk. X-ray spectroscopies provide an exciton binding energy of 0.32 ± 0.10 eV in the nanoparticles. This is 5 times higher than the value of bulk crystals (0.084 ± 0.010 eV), and readily explains the high fluorescence quantum yield in nanoparticles. In the bulk, at high excitation concentrations, the fluorescence intensity has quadratic behavior following the Saha-Langmuir model due to the nongeminate recombination of charges forming the emissive exciton states. In the nanoparticles, a linear dependence is observed since the excitation concentration per particle is significantly less than one. Even the bulk shows linear emission intensity dependence at lower excitation concentrations. In this case, the average excitation spacing becomes larger than the carrier diffusion length suppressing the nongeminate recombination. From these considerations we obtain the charge carrier diffusion length in MAPbBr3 of 100 nm.

This work examined the role of exogenously applied calcium (Ca; 50 mM) and potassium (K; 10 mM) (alone and in combination) in alleviating the negative effects of cadmium (Cd; 200 μM) on growth, biochemical attributes, secondary metabolites and yield of chickpea (Cicer arietinum L.). Cd stress significantly decreased the length and weight (fresh and dry) of shoot and root and yield attributes in terms of number of pods and seed yield (vs. control). Exhibition of decreases in chlorophyll (Chl) a, Chl b, and total Chl was also observed with Cd-exposure when compared to control. However, Cd-exposure led to an increase in the content of carotenoids. In contrast, the exogenous application of Ca and K individually as well as in combination minimized the extent of Cd-impact on previous traits. C. arietinum seedlings subjected to Cd treatment exhibited increased contents of organic solute (proline, Pro) and total protein; whereas, Ca and K-supplementation further enhanced the Pro and total protein content. Additionally, compared to control, Cd-exposure also caused elevation in the contents of oxidative stress markers (hydrogen peroxidase, H2O2; malondialdehyde, MDA) and in the activity of antioxidant defense enzymes (superoxide dismutase, SOD; catalase, CAT; ascorbate peroxidase, APX; glutathione reductase, GR). Ca, K, and Ca + K supplementation caused further enhancements in the activity of these enzymes but significantly decreased contents of H2O2 and MDA, also that of Cd accumulation in shoot and root. The contents of total phenol, flavonoid and mineral elements (S, Mn, Mg, Ca and K) that were also suppressed in Cd stressed plants in both shoot and root were restored to appreciable levels with Ca- and K-supplementation. However, the combination of Ca + K supplementation was more effective in bringing the positive response as compared to individual effect of Ca and K on Cd-exposed C. arietinum. Overall, this investigation suggests that application of Ca and/or K can efficiently minimize Cd-toxicity and eventually improve health and yield in C. arietinum by the cumulative outcome of the enhanced contents of organic solute, secondary metabolites, mineral elements, and activity of antioxidant defense enzymes.

The recent advancements in Internet of Things (IoT), cloud computing, and Artificial Intelligence (AI) transformed the conventional healthcare system into smart healthcare. By incorporating key technologies such as IoT and AI, medical services can be improved. The convergence of IoT and AI offers different opportunities in healthcare sector. In this view, the current research article presents a new AI and IoT convergence-based disease diagnosis model for smart healthcare system. The major goal of this article is to design a disease diagnosis model for heart disease and diabetes using AI and IoT convergence techniques. The presented model encompasses different stages namely, data acquisition, preprocessing, classification, and parameter tuning. IoT devices such as wearables and sensors permit seamless data collection while AI techniques utilize the data in disease diagnosis. The proposed method uses Crow Search Optimization algorithm-based Cascaded Long Short Term Memory (CSO-CLSTM) model for disease diagnosis. In order to achieve better classification of the medical data, CSO is applied to tune both `weights' and `bias' parameters of CLSTM model. Besides, isolation Forest (iForest) technique is employed in this research work to remove the outliers. The application of CSO helps in considerable improvement in the diagnostic outcomes of CLSTM model. The performance of CSO-LSTM model was validated using healthcare data. During the experimentation, the presented CSO-LSTM model accomplished the maximum accuracies of 96.16% and 97.26% in diagnosing heart disease and diabetes respectively. Therefore, the proposed CSO-LSTM model can be employed as an appropriate disease diagnosis tool for smart healthcare systems.

Fusarium species threaten wheat crops around the world and cause global losses. The global trend is toward using biological materials such as selenium (Se) in nano form to control these fungi. Bulk selenium is toxic and harmful at high doses; however, selenium nanoparticles are safe; therefore, the aim of this study to employ the biological selenium nanoparticles (BioSeNPs) synthesized by Lactobacillus acidophilus ML14 in controlling wheat crown and root rot diseases (CRDs) induced by Fusarium spp., especially Fusarium culmorum and Fusarium graminearum, and their reflection on the growth and productivity of wheat. The ability of BioSeNPs to suppress the development and propagation of F. culmorum and F. graminearum and the CRDs incidence were also investigated. The obtained BioSeNPs were spherical with a size of 46 nm and a net charge of –23.48. The BioSeNPs significantly scavenged 88 and 92% of DPPḢ and ABTṠ radicals and successfully inhibited the fungal growth in the range of 20–40 µg/mL; these biological activities were related to the small size of BioSeNPs and the phenolic content in their suspension. Under greenhouse conditions, the wheat supplemented with BioSeNPs (100 µg/mL) was significantly reduced the incidence of CRDs by 75% and considerably enhanced plant growth, grain quantity and quality by 5–40%. Also, photosynthetic pigments and gas exchange parameters were significantly increased as compared to chemical selenium nanoparticles (Che-SeNPs) and control. This study results could be recommended the use of BioSeNPs (100 µg/mL) in reducing CRDs incidence and severity in wheat plants, enhancing their tolerance with drought and heat stress, and increasing their growth and productivity as compared to control and Che-SeNPs.