State Key Laboratory of Polymer Physics and Chemistry

A new polymer donor (PBDB-T-SF) and a new small molecule acceptor (IT-4F) for fullerene-free organic solar cells (OSCs) were designed and synthesized. The influences of fluorination on the absorption spectra, molecular energy levels, and charge mobilities of the donor and acceptor were systematically studied. The PBDB-T-SF:IT-4F-based OSC device showed a record high efficiency of 13.1%, and an efficiency of over 12% can be obtained with a thickness of 100-200 nm, suggesting the promise of fullerene-free OSCs in practical applications.

Optimizing the molecular structures of organic photovoltaic (OPV) materials is one of the most effective methods to boost power conversion efficiencies (PCEs). For an excellent molecular system with a certain conjugated skeleton, fine tuning the alky chains is of considerable significance to fully explore its photovoltaic potential. In this work, the optimization of alkyl chains is performed on a chlorinated nonfullerene acceptor (NFA) named BTP-4Cl-BO (a Y6 derivative) and very impressive photovoltaic parameters in OPV cells are obtained. To get more ordered intermolecular packing, the n-undecyl is shortened at the edge of BTP-eC11 to n-nonyl and n-heptyl. As a result, the NFAs of BTP-eC9 and BTP-eC7 are synthesized. The BTP-eC7 shows relatively poor solubility and thus limits its application in device fabrication. Fortunately, the BTP-eC9 possesses good solubility and, at the same time, enhanced electron transport property than BTP-eC11. Significantly, due to the simultaneously enhanced short-circuit current density and fill factor, the BTP-eC9-based single-junction OPV cells record a maximum PCE of 17.8% and get a certified value of 17.3%. These results demonstrate that minimizing the alkyl chains to get suitable solubility and enhanced intermolecular packing has a great potential in further improving its photovoltaic performance.

A nonfullerene-based polymer solar cell (PSC) that significantly outperforms fullerene-based PSCs with respect to the power-conversion efficiency is demonstrated for the first time. An efficiency of >11%, which is among the top values in the PSC field, and excellent thermal stability is obtained using PBDB-T and ITIC as donor and acceptor, respectively. As a service to our authors and readers, this journal provides supporting information supplied by the authors. Such materials are peer reviewed and may be re-organized for online delivery, but are not copy-edited or typeset. Technical support issues arising from supporting information (other than missing files) should be addressed to the authors. Please note: The publisher is not responsible for the content or functionality of any supporting information supplied by the authors. Any queries (other than missing content) should be directed to the corresponding author for the article.

Broadening the optical absorption of organic photovoltaic (OPV) materials by enhancing the intramolecular push-pull effect is a general and effective method to improve the power conversion efficiencies of OPV cells. However, in terms of the electron acceptors, the most common molecular design strategy of halogenation usually results in down-shifted molecular energy levels, thereby leading to decreased open-circuit voltages in the devices. Herein, we report a chlorinated non-fullerene acceptor, which exhibits an extended optical absorption and meanwhile displays a higher voltage than its fluorinated counterpart in the devices. This unexpected phenomenon can be ascribed to the reduced non-radiative energy loss (0.206 eV). Due to the simultaneously improved short-circuit current density and open-circuit voltage, a high efficiency of 16.5% is achieved. This study demonstrates that finely tuning the OPV materials to reduce the bandgap-voltage offset has great potential for boosting the efficiency.

Abstract Improving power conversion efficiency (PCE) is important for broadening the applications of organic photovoltaic (OPV) cells. Here, a maximum PCE of 19.0% (certified value of 18.7%) is achieved in single‐junction OPV cells by combining material design with a ternary blending strategy. An active layer comprising a new wide‐bandgap polymer donor named PBQx‐TF and a new low‐bandgap non‐fullerene acceptor (NFA) named eC9‐2Cl is rationally designed. With optimized light utilization, the resulting binary cell exhibits a good PCE of 17.7%. An NFA F‐BTA3 is then added to the active layer as a third component to simultaneously improve the photovoltaic parameters. The improved light unitization, cascaded energy level alignment, and enhanced intermolecular packing result in open‐circuit voltage of 0.879 V, short‐circuit current density of 26.7 mA cm −2 , and fill factor of 0.809. This study demonstrates that further improvement of PCEs of high‐performance OPV cells requires fine tuning of the electronic structures and morphologies of the active layers.

Fine energy-level modulations of small-molecule acceptors (SMAs) are realized via subtle chemical modifications on strong electron-withdrawing end-groups. The two new SMAs (IT-M and IT-DM) end-capped by methyl-modified dicycanovinylindan-1-one exhibit upshifted lowest unoccupied molecular orbital (LUMO) levels, and hence higher open-circuit voltages can be observed in the corresponding devices. Finally, a top power conversion efficiency of 12.05% is achieved. As a service to our authors and readers, this journal provides supporting information supplied by the authors. Such materials are peer reviewed and may be re-organized for online delivery, but are not copy-edited or typeset. Technical support issues arising from supporting information (other than missing files) should be addressed to the authors. Please note: The publisher is not responsible for the content or functionality of any supporting information supplied by the authors. Any queries (other than missing content) should be directed to the corresponding author for the article.

We report two new heteroleptic polypyridyl ruthenium complexes, coded C101 and C102, with high molar extinction coefficients by extending the π-conjugation of spectator ligands, with a motivation to enhance the optical absorptivity of mesoporous titania film and charge collection yield in a dye-sensitized solar cell. On the basis of this C101 sensitizer, several DSC benchmarks measured under the air mass 1.5 global sunlight have been reached. Along with an acetonitrile-based electrolyte, the C101 sensitizer has already achieved a strikingly high efficiency of 11.0−11.3%, even under a preliminary testing. More importantly, based on a low volatility 3-methoxypropionitrile electrolyte and a solvent-free ionic liquid electrolyte, cells have corresponding >9.0% and ∼7.4% efficiencies retained over 95% of their initial performances after 1000 h full sunlight soaking at 60 °C. With the aid of electrical impedance measurements, we further disclose that, compared to the cell with an acetonitrile-based electrolyte, a dye-sensitized solar cell with an ionic liquid electrolyte shows a feature of much shorter effective electron diffusion lengths due to the lower electron diffusion coefficients and shorter electron lifetimes in the mesoporous titania film, explaining the photocurrent difference between these two type devices. This highlights the next necessary efforts to further improve the efficiency of cells with ionic liquid electrolytes, facilitating the large-scale production and application of flexible thin film mesoscopic solar cells.

A new copolymer PM6 based on fluorothienyl-substituted benzodithiophene is synthesized and characterized. The inverted polymer solar cells based on PM6 exhibit excellent performance with Voc of 0.98 V and power conversion efficiency (PCE) of 9.2% for a thin-film thickness of 75 nm. Furthermore, the single-junction semitransparent device shows a high PCE of 5.7%. As a service to our authors and readers, this journal provides supporting information supplied by the authors. Such materials are peer reviewed and may be re-organized for online delivery, but are not copy-edited or typeset. Technical support issues arising from supporting information (other than missing files) should be addressed to the authors. Please note: The publisher is not responsible for the content or functionality of any supporting information supplied by the authors. Any queries (other than missing content) should be directed to the corresponding author for the article.

Abstract Fluorine‐contained polymers, which have been widely used in highly efficient polymer solar cells (PSCs), are rather costly due to their complicated synthesis and low yields in the preparation of components. Here, the feasibility of replacing the critical fluorine substituents in high‐performance photovoltaic polymer donors with chlorine is demonstrated, and two polymeric donors, PBDB‐T‐2F and PBDB‐T‐2Cl, are synthesized and compared in parallel. The synthesis of PBDB‐T‐2Cl is much simpler than that of PBDB‐T‐2F. The two polymers have very similar optoelectronic and morphological properties, except the chlorinated polymer possess lower molecular energy levels than the fluorinated one. As a result, the PBDB‐T‐2Cl‐based PSCs exhibit higher open circuit voltage ( V oc ) than the PBDB‐T‐2F‐based devices, leading to an outstanding power conversion efficiency of over 14%. This work establishes a more economical design paradigm of replacing fluorine with chlorine for preparing highly efficient polymer donors.

A facile hydrothermal synthesis route to N and S, N co-doped graphene quantum dots (GQDs) was developed by using citric acid as the C source and urea or thiourea as N and S sources. Both N and S, N doped GQDs showed high quantum yield (78% and 71%), excitation independent under excitation of 340-400 nm and single exponential decay under UV excitation. A broad absorption band in the visible region appeared in S, N co-doped GQDs due to doping with sulfur, which alters the surface state of GQDs. However, S, N co-doped GQDs show different color emission under excitation of 420-520 nm due to their absorption in the visible region. The excellent photocatalytic performance of the S, N co-doped GQD/TiO2 composites was demonstrated by degradation of rhodamine B under visible light. The apparent rate of S, N:GQD/TiO2 is 3 and 10 times higher than that of N:GQD/TiO2 and P25 TiO2 under visible light irradiation, respectively.

Advances in the design and application of highly efficient conjugated polymers and small molecules over the past years have enabled the rapid progress in the development of organic photovoltaic (OPV) technology as a promising alternative to conventional solar cells. Among the numerous OPV materials, benzodithiophene (BDT)-based polymers and small molecules have come to the fore in achieving outstanding power conversion efficiency (PCE) and breaking 10% efficiency barrier in the single junction OPV devices. Remarkably, the OPV device featured by BDT-based polymer has recently demonstrated an impressive PCE of 11.21%, indicating the great potential of this class of materials in commercial photovoltaic applications. In this review, we offered an overview of the organic photovoltaic materials based on BDT from the aspects of backbones, functional groups, alkyl chains, and device performance, trying to provide a guideline about the structure-performance relationship. We believe more exciting BDT-based photovoltaic materials and devices will be developed in the near future.

Another dimension: Two newly designed two-dimensional (2D) conjugated polymers, PBDTTT-E-T (see scheme; left) and PBDTTT-C-T, were prepared and their properties compared to those of the alkoxy-substituted analogues (right). PBDTTT-E-T and PBDTTT-C-T exhibited smaller band gaps, lower-energy HOMO levels, better thermal stabilities, and much better photovoltaic properties. Therefore, the 2D structures are feasible for the design of photovoltaic polymers. Detailed facts of importance to specialist readers are published as ”Supporting Information”. Such documents are peer-reviewed, but not copy-edited or typeset. They are made available as submitted by the authors. Please note: The publisher is not responsible for the content or functionality of any supporting information supplied by the authors. Any queries (other than missing content) should be directed to the corresponding author for the article.

In view of the limited ruthenium resource, metal-free organic dyes may play a prominent role in the coming large-scale application of cost-effective dye-sensitized solar cells, if their efficiency and stability can be considerably improved. In this paper we utilized a binary π-conjugated spacer of ethylenedioxythiophene and dithienosilole to construct a high molar absorption coefficient push−pull dye, characteristic of an intramolecular charge-transfer band peaking at 584 nm measured in chloroform. In comparison with the standard ruthenium sensitizer Z907, this metal-free chromophore C219 endowed a nanocrystalline titania film with an evident light-harvesting enhancement, leading to an unprecedented 10.0−10.3% efficiency at the AM1.5G conditions for dye-sensitized solar cells with nonruthenium dyestuffs, although a highly volatile electrolyte was used. Transient absorption measurements have revealed that even if the kinetics of back-electron transfer and dye regeneration are considerably different for Z907 and C219, the branching ratios of these two charge-transfer channels are over 35 for both dyes, ensuring a high yield of net charge separation at the titania/dye/electrolyte interface. A solvent-free ionic liquid cell with C219 as the sensitizer exhibited an impressive efficiency of 8.9% under a low light intensity of 14.39 mW cm−2, making it very favorable for the indoor application of flexible dye-sensitized solar cells.

Photoluminescent graphene quantum dots (GQDs) have received enormous attention because of their unique chemical, electronic and optical properties. Here a series of GQDs were synthesized under hydrothermal processes in order to investigate the formation process and optical properties of N-doped GQDs. Citric acid (CA) was used as a carbon precursor and self-assembled into sheet structure in a basic condition and formed N-free GQD graphite framework through intermolecular dehydrolysis reaction. N-doped GQDs were prepared using a series of N-containing bases such as urea. Detailed structural and property studies demonstrated the formation mechanism of N-doped GQDs for tunable optical emissions. Hydrothermal conditions promote formation of amide between -NH₂ and -COOH with the presence of amine in the reaction. The intramoleculur dehydrolysis between neighbour amide and COOH groups led to formation of pyrrolic N in the graphene framework. Further, the pyrrolic N transformed to graphite N under hydrothermal conditions. N-doping results in a great improvement of PL quantum yield (QY) of GQDs. By optimized reaction conditions, the highest PL QY (94%) of N-doped GQDs was obtained using CA as a carbon source and ethylene diamine as a N source. The obtained N-doped GQDs exhibit an excitation-independent blue emission with single exponential lifetime decay.

Abstract Analysis of the nonisothermal melt and cold crystallization kinetics of poly(aryl ether ether ketone ketone) (PEEKK) was performed by using differential scanning calorimetry (DSC). The Avrami equation modified by Jeziorny could describe only the primary stage of nonisothermal crystallization of PEEKK. And, the Ozawa analysis, when applied to this polymer system, failed to describe its nonisothermal crystallization behavior. A new and convenient approach for the nonisothermal crystallization was proposed by combining the Avrami equation with the Ozawa equation. By evaluating the kinetic parameters in this approach, the crystallization behavior of PEEKK was analyzed. According to the Kissinger method, the activation energies were determined to be 189 and 328 kJ/mol for nonisothermal melt and cold crystallization, respectively.

Abstract In an organic electroluminescent (EL) device, the recombination of injected holes and electrons produces what appears to be an ion‐pair or charge‐transfer (CT) exciton, and this CT exciton decays to produce one photon directly, or relaxes to a low‐lying local exciton (LE). Thus the full utilization of both the energy of the CT exciton and the LE should be a pathway for obtaining high‐efficiency EL. Here, a twisting donor‐acceptor (D‐A) triphenylamine‐imidazol molecule, TPA‐PPI, is reported: its synthesis, photophysics, and EL performance. Prepared by a manageable, one‐pot cyclizing reaction, TPA‐PPI exhibits deep‐blue emission with high quantum yields (90%) both in solution and in the solid state. Fluorescent solvatochromic experiments for TPA‐PPI solutions show a red‐shift of 57 nm (3032 cm −1 ) from low‐polarity hexane (406 nm) to high‐polarity acetonitrile (463 nm), accompanied by the gradual disappearance of the vibrational band in the spectra with increased solvent polarity. The photophysical investigation and DFT analysis suggest an intercrossed CT and LE excited state of the TPA‐PPI, originating from its twisting D‐A configuration. This is a rare instance that a CT‐state material shows highly efficient deep‐blue emission. EL characterization demonstrates that, as a deep‐blue emitter with CIE coordinates of (0.15, 0.11), the performance of a TPA‐PPI‐based device is rather excellent, displaying a maximum current efficiency of >5.0 cd A −1 , and a maximum external quantum efficiency of >5.0%, corresponding to a maximum internal quantum efficiency of >25%. The effective utilization of the excitation energy arising from materials with intercrossed‐excited‐state (LE and CT) characters is thought to be beneficial for the improved efficiency of EL devices.

Abstract The design of narrow band gap (NBG) donors or acceptors and their application in organic solar cells (OSCs) are of great importance in the conversion of solar photons to electrons. Limited by the inevitable energy loss from the optical band gap of the photovoltaic material to the open‐circuit voltage of the OSC device, the improvement of the power conversion efficiency (PCE) of NBG‐based OSCs faces great challenges. A novel acceptor–donor–acceptor structured non‐fullerene acceptor is reported with an ultra‐narrow band gap of 1.24 eV, which was achieved by an enhanced intramolecular charge transfer (ICT) effect. In the OSC device, despite a low energy loss of 0.509 eV, an impressive short‐circuit current density of 25.3 mA cm −2 is still recorded, which is the highest value for all OSC devices. The high 10.9 % PCE of the NBG‐based OSC demonstrates that the design and application of ultra‐narrow materials have the potential to further improve the PCE of OSC devices.

Chromium(VI) [Cr(VI)] is considered as a severe environmental pollutant, due to its highly toxic and carcinogenic properties. Therefore, low cost, highly sensitive sensors for the determination of Cr(VI) are highly demanded. It is well-known that highly luminescent carbon dots (CDs) have been successfully applied as fluorescent nanosensors for pH, ions, and molecular substances. In the present work, we have demonstrated an on-off fluorescent CD probe for detecting Cr(VI) based on the inner filter effect (IFE) because the absorption bands of Cr(IV) fully covered the emission and excitation bands of CDs. This CD-based nanosensor provides obvious advantages of simplicity, convenience, rapid response, high selectivity, and sensitivity, which have potential application for the detection of Cr(VI) in the environmental industry. In addition, because Cr(VI) can be reduced to low valent chromium species easily by reductant, resulting in the elimination of the IFE and recovery of CD fluorescence, the CD-Cr(VI) mixture could behave as an off-on type fluorescent probe for reductant. We employed ascorbic acid (AA) as an example molecule to demonstrate this off-on type fluorescent probe.

Graphene has attracted increasing attention in different scientific fields including catalysis. Via modification with foreign metal-free elements such as nitrogen, its unique electronic and spin structure can be changed and these doped graphene sheets have been successfully employed in some catalytic reactions recently, showing them to be promising catalysts for a wide range of reactions. In this review, we summarize the recent advancements of these new and interesting catalysts, with an emphasis on the universal origin of their catalytic mechanisms. We are full of hope for future developments, such as more precisely controlled doping methods, atom-scale surface characterization technology, generating more active catalysts via doping, and finding wide applications in many different fields.

ADVERTISEMENT RETURN TO ISSUEPREVReviewNEXTTitanium Dioxide Nanomaterials for Photovoltaic ApplicationsYu Bai†‡, Iván Mora-Seró§, Filippo De Angelis∥, Juan Bisquert§, and Peng Wang*†View Author Information† State Key Laboratory of Polymer Physics and Chemistry, Changchun Institute of Applied Chemistry, Chinese Academy of Sciences, Changchun 130022, China‡ Institute of Chemistry and Energy Material Innovation, Academy of Fundamental Interdisciplinary Sciences, Harbin Institute of Technology, Harbin 150080, China§ Photovoltaic and Optoelectronic Devices Group, Departament de Física, Universitat Jaume I, 12071 Castelló, Spain∥ Istituto CNR di Scienze e Tecnologie Molecolari, c/o Dipartimento di Chimica, Università di Perugia, via Elce di Sotto 8, I-06123 Perugia, Italy*E-mail: [email protected]Cite this: Chem. Rev. 2014, 114, 19, 10095–10130Publication Date (Web):March 25, 2014Publication History Received25 October 2013Published online25 March 2014Published inissue 8 October 2014https://pubs.acs.org/doi/10.1021/cr400606nhttps://doi.org/10.1021/cr400606nreview-articleACS PublicationsCopyright © 2014 American Chemical SocietyRequest reuse permissionsArticle Views15882Altmetric-Citations657LEARN ABOUT THESE METRICSArticle Views are the COUNTER-compliant sum of full text article downloads since November 2008 (both PDF and HTML) across all institutions and individuals. These metrics are regularly updated to reflect usage leading up to the last few days.Citations are the number of other articles citing this article, calculated by Crossref and updated daily. Find more information about Crossref citation counts.The Altmetric Attention Score is a quantitative measure of the attention that a research article has received online. Clicking on the donut icon will load a page at altmetric.com with additional details about the score and the social media presence for the given article. Find more information on the Altmetric Attention Score and how the score is calculated. Share Add toView InAdd Full Text with ReferenceAdd Description ExportRISCitationCitation and abstractCitation and referencesMore Options Share onFacebookTwitterWechatLinked InRedditEmail Other access optionsGet e-Alertsclose SUBJECTS:Differential scanning calorimetry,Dyes and pigments,Oxides,Recombination,Solar cells Get e-Alerts