SUNY Polytechnic Institute

The global bandwidth shortage facing wireless carriers has motivated the exploration of the underutilized millimeter wave (mm-wave) frequency spectrum for future broadband cellular communication networks. There is, however, little knowledge about cellular mm-wave propagation in densely populated indoor and outdoor environments. Obtaining this information is vital for the design and operation of future fifth generation cellular networks that use the mm-wave spectrum. In this paper, we present the motivation for new mm-wave cellular systems, methodology, and hardware for measurements and offer a variety of measurement results that show 28 and 38 GHz frequencies can be used when employing steerable directional antennas at base stations and mobile devices.

The stability of a queueing network with interdependent servers is considered. The dependency among the servers is described by the definition of their subsets that can be activated simultaneously. Multihop radio networks provide a motivation for the consideration of this system. The problem of scheduling the server activation under the constraints imposed by the dependency among servers is studied. The performance criterion of a scheduling policy is its throughput that is characterized by its stability region, that is, the set of vectors of arrival and service rates for which the system is stable. A policy is obtained which is optimal in the sense that its stability region is a superset of the stability region of every other scheduling policy, and this stability region is characterized. The behavior of the network is studied for arrival rates that lie outside the stability region. Implications of the results in certain types of concurrent database and parallel processing systems are discussed.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">&gt;</ETX>

For pt.I see ibid., p.1927-38. This is the second of a two-part paper on a new form of spatial diversity, where diversity gains are achieved through the cooperation of mobile users. Part I described the user cooperation concept and proposed a cooperation strategy for a conventional code-division multiple-access (CDMA) system. Part II investigates the cooperation concept further and considers practical issues related to its implementation. In particular, we investigate the optimal and suboptimal receiver design, and present performance analysis for the conventional CDMA implementation proposed in Part I. We also consider a high-rate CDMA implementation and a cooperation strategy when assumptions about the channel state information at the transmitters are relaxed. We illustrate that, under all scenarios studied, cooperation is beneficial in terms of increasing system throughput and cell coverage, as well as decreasing sensitivity to channel variations.

With the severe spectrum shortage in conventional cellular bands, millimeter wave (mmW) frequencies between 30 and 300 GHz have been attracting growing attention as a possible candidate for next-generation micro- and picocellular wireless networks. The mmW bands offer orders of magnitude greater spectrum than current cellular allocations and enable very high-dimensional antenna arrays for further gains via beamforming and spatial multiplexing. This paper uses recent real-world measurements at 28 and 73 GHz in New York, NY, USA, to derive detailed spatial statistical models of the channels and uses these models to provide a realistic assessment of mmW micro- and picocellular networks in a dense urban deployment. Statistical models are derived for key channel parameters, including the path loss, number of spatial clusters, angular dispersion, and outage. It is found that, even in highly non-line-of-sight environments, strong signals can be detected 100-200 m from potential cell sites, potentially with multiple clusters to support spatial multiplexing. Moreover, a system simulation based on the models predicts that mmW systems can offer an order of magnitude increase in capacity over current state-of-the-art 4G cellular networks with no increase in cell density from current urban deployments.

Estimation of the parameters of a single-frequency complex tone from a finite number of noisy discrete-time observations is discussed. The appropriate Cramér-Rao bounds and maximum-likelihood (MI.) estimation algorithms are derived. Some properties of the ML estimators are proved. The relationship of ML estimation to the discrete Fourier transform is exploited to obtain practical algorithms. The threshold effect of one algorithm is analyzed and compared to simulation results. Other simulation results verify other aspects of the analysis.

The authors report a study of the effects of price, brand, and store information on buyers’ perceptions of product quality and value, as well as their willingness to buy. Hypotheses are derived from a conceptual model positing the effects of extrinsic cues (price, brand name, and store name) on buyers’ perceptions and purchase intentions. Moreover, the design of the experiment allows additional analyses on the relative differential effects of price, brand name, and store name on the three dependent variables. Results indicate that price had a positive effect on perceived quality, but a negative effect on perceived value and willingness to buy. Favorable brand and store information positively influenced perceptions of quality and value, and subjects’ willingness to buy. The major findings are discussed and directions for future research are suggested.

ADVERTISEMENT RETURN TO ISSUEPREVArticleNEXTOrgano Lanthanide Metal Complexes for Electroluminescent MaterialsJunji Kido and Yoshi OkamotoView Author Information Graduate School of Science and Engineering, Yamagata University, 4−3−16 Johnan Yonezawa Yamagata, 992-8510, Japan Department of Chemistry and Polymer Research Institute, Polytechnic University, 6-Metrotech Center, Brooklyn, New York 11201 Cite this: Chem. Rev. 2002, 102, 6, 2357–2368Publication Date (Web):May 15, 2002Publication History Received21 November 2001Published online15 May 2002Published inissue 1 June 2002https://pubs.acs.org/doi/10.1021/cr010448yhttps://doi.org/10.1021/cr010448yresearch-articleACS PublicationsCopyright © 2002 American Chemical SocietyRequest reuse permissionsArticle Views9315Altmetric-Citations1508LEARN ABOUT THESE METRICSArticle Views are the COUNTER-compliant sum of full text article downloads since November 2008 (both PDF and HTML) across all institutions and individuals. These metrics are regularly updated to reflect usage leading up to the last few days.Citations are the number of other articles citing this article, calculated by Crossref and updated daily. Find more information about Crossref citation counts.The Altmetric Attention Score is a quantitative measure of the attention that a research article has received online. Clicking on the donut icon will load a page at altmetric.com with additional details about the score and the social media presence for the given article. Find more information on the Altmetric Attention Score and how the score is calculated. Share Add toView InAdd Full Text with ReferenceAdd Description ExportRISCitationCitation and abstractCitation and referencesMore Options Share onFacebookTwitterWechatLinked InRedditEmail Other access optionsGet e-Alertsclose SUBJECTS:Chemical structure,Diodes,Ions,Layers,Ligands Get e-Alerts

The problem of error control and concealment in video communication is becoming increasingly important because of the growing interest in video delivery over unreliable channels such as wireless networks and the Internet. This paper reviews the techniques that have been developed for error control and concealment. These techniques are described in three categories according to the roles that the encoder and decoder play in the underlying approaches. Forward error concealment includes methods that add redundancy at the source end to enhance error resilience of the coded bit streams. Error concealment by postprocessing refers to operations at the decoder to recover the damaged areas based on characteristics of image and video signals. Last, interactive error concealment covers techniques that are dependent on a dialogue between the source and destination. Both current research activities and practice in international standards are covered.

In many modern-day control problems encountered in the fluid, petroleum, power, gas and paper industries, cross coupling (interaction) between controlled and manipulated variables can be so severe that any attempt to employ single-loop controllers results in unacceptable performance. In all these situations, any workable control strategy most take into account the true multivariable nature of the plant and address itself directly to the design of a compatible multivariable controller. Any practical design technique most be able to cope with load disturbance, plant saturation, measurement noise, process lag, sensitivity and also incorporate suitable criteria delimiting transient behavior and steady-state performance. These difficulties, when compounded by the fact that many plants (such as chemical reactors) are inherently open-loop unstable have hindered the development of an inclusive frequency-domain analytic design methodology. However, a solution based on a least-square Wiener-Hopf minimization of an appropriately chosen cost functional is now available. The optimal controller obtained by this method guarantees an asymptotically stable and dynamical closed-loop configuration irrespective of whether or not the plant is proper, stable, or minimum-phase and also permits the stability margin of the optimal design to be ascertained in advance. The main purpose of this paper is to lay bare the physical assumptions underlying the choice of model and to present an explicit formula for the optimal controller.

A major challenge in the operation of wireless communications systems is the efficient use of radio resources. One important component of radio resource management is power control, which has been studied extensively in the context of voice communications. With the increasing demand for wireless data services, it is necessary to establish power control algorithms for information sources other than voice. We present a power control solution for wireless data in the analytical setting of a game theoretic framework. In this context, the quality of service (QoS) a wireless terminal receives is referred to as the utility and distributed power control is a noncooperative power control game where users maximize their utility. The outcome of the game results in a Nash (1951) equilibrium that is inefficient. We introduce pricing of transmit powers in order to obtain Pareto improvement of the noncooperative power control game, i.e., to obtain improvements in user utilities relative to the case with no pricing. Specifically, we consider a pricing function that is a linear function of the transmit power. The simplicity of the pricing function allows a distributed implementation where the price can be broadcast by the base station to all the terminals. We see that pricing is especially helpful in a heavily loaded system.

Femtocells, despite their name, pose a potentially large disruption to the carefully planned cellular networks that now connect a majority of the planet's citizens to the Internet and with each other. Femtocells - which by the end of 2010 already outnumbered traditional base stations and at the time of publication are being deployed at a rate of about five million a year - both enhance and interfere with this network in ways that are not yet well understood. Will femtocells be crucial for offloading data and video from the creaking traditional network? Or will femtocells prove more trouble than they are worth, undermining decades of careful base station deployment with unpredictable interference while delivering only limited gains? Or possibly neither: are femtocells just a "flash in the pan"; an exciting but short-lived stage of network evolution that will be rendered obsolete by improved WiFi offloading, new backhaul regulations and/or pricing, or other unforeseen technological developments? This tutorial article overviews the history of femtocells, demystifies their key aspects, and provides a preview of the next few years, which the authors believe will see a rapid acceleration towards small cell technology. In the course of the article, we also position and introduce the articles that headline this special issue.

A spatial smoothing scheme is further investigated in the context of coherent signal classification. It is shown that by making use of a set of forward and complex conjugated backward subarrays simultaneously, it is always possible to estimate any K directions of arrival using at most 3K/2 sensor elements. This is achieved by creating a smoothed array output covariance matrix that is structurally identical to a covariance matrix in some noncoherent situation. By incorporating eigenstructure-based techniques on this smoothed covariance matrix, it then becomes possible to correctly identify all directions of arrival irrespective of their correlation.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">&gt;</ETX>

We consider the estimation of a random vector observed through a linear transform followed by a componentwise probabilistic measurement channel. Although such linear mixing estimation problems are generally highly non-convex, Gaussian approximations of belief propagation (BP) have proven to be computationally attractive and highly effective in a range of applications. Recently, Bayati and Montanari have provided a rigorous and extremely general analysis of a large class of approximate message passing (AMP) algorithms that includes many Gaussian approximate BP methods. This paper extends their analysis to a larger class of algorithms to include what we call generalized AMP (G-AMP). G-AMP incorporates general (possibly non-AWGN) measurement channels. Similar to the AWGN output channel case, we show that the asymptotic behavior of the G-AMP algorithm under large i.i.d. Gaussian transform matrices is described by a simple set of state evolution (SE) equations. The general SE equations recover and extend several earlier results, including SE equations for approximate BP on general output channels by Guo and Wang.

If only a segment of a function <tex xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">f (t)</tex> is given, then its Fourier spectrum <tex xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">F(\omega)</tex> is estimated either as the transform of the product of <tex xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">f(t)</tex> with a time-limited window <tex xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">w(t)</tex> , or by certain techniques based on various a priori assumptions. In the following, a new algorithm is proposed for computing the transform of a band-limited function. The algorithm is a simple iteration involving only the fast Fourier transform (FFT). The effect of noise and the error due to aliasing are determined and it is shown that they can be controlled by early termination of the iteration. The proposed method can also be used to extrapolate bandlimited functions.

A projection operator onto a closed convex set in Hilbert space is one of the few examples of a nonlinear map that can be defined in simple abstract terms. Moreover, it minimizes distance and is nonexpansive, and therefore shares two of the more important properties of ordinary linear orthogonal projections onto closed linear manifolds. In this paper, we exploit the properties of these operators to develop several iterative algorithms for image restoration from partial data which permit any number of nonlinear constraints of a certain type to be subsumed automatically. Their common conceptual basis is as follows. Every known property of an original image f is envisaged as restricting it to lie in a well-defined closed convex set. Thus, m such properties place f in the intersection E(0) = E(i) of the corresponding closed convex sets E(1),E(2),...EE(m). Given only the projection operators PE(i) onto the individual E(i)'s, i = 1 --> m, we restore f by recursive means. Clearly, in this approach, the realization of the P(i)'s in a Hilbert space setting is one of the major synthesis problems. Section I describes the geometrical significance of the three main theorems in considerable detail, and most of the underlying ideas are illustrated with the aid of simple diagrams. Section II presents rules for the numerical implementation of 11 specific projection operators which are found to occur frequently in many signal-processing applications, and the Appendix contains proofs of all the major results.

Most simple nonlinear thresholding rules for wavelet-based denoising assume that the wavelet coefficients are independent. However, wavelet coefficients of natural images have significant dependencies. We only consider the dependencies between the coefficients and their parents in detail. For this purpose, new non-Gaussian bivariate distributions are proposed, and corresponding nonlinear threshold functions (shrinkage functions) are derived from the models using Bayesian estimation theory. The new shrinkage functions do not assume the independence of wavelet coefficients. We show three image denoising examples in order to show the performance of these new bivariate shrinkage rules. In the second example, a simple subband-dependent data-driven image denoising system is described and compared with effective data-driven techniques in the literature, namely VisuShrink, SureShrink, BayesShrink, and hidden Markov models. In the third example, the same idea is applied to the dual-tree complex wavelet coefficients.

Models and results are presented that assess the performance of statistical multiplexing of independent video sources. Presented results indicate that the probability of buffering (or delaying) video data beyond an acceptable limit drops dramatically as the number of multiplexed sources increases beyond one. This demonstrates that statistical or asynchronous time-division multiplexing (TDM) can efficiently absorb temporal variations of the bit rate of individual sources without the significant variations in reception quality exhibited by multimode videocoders for synchronous TDM or circuit-switched transmission. Two source models are presented. The first model is an autoregressive continuous-state, discrete-time Markov process, which was used to generate source data in simulation experiments. The second model is a discrete-state, continuous-time Markov process that was used in deriving a fluid-flow queuing analysis. The presented study shows that both models generated consistent numerical results in terms of queuing performance.< <ETX xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">&gt;</ETX>

The spectrum crunch currently experienced by mobile cellular carriers makes the underutilized millimeter-wave frequency spectrum a sensible choice for next-generation cellular communications, particularly when considering the recent advances in low cost sub-terahertz/millimeter-wave complementary metal-oxide semiconductor circuitry. To date, however, little is known on how to design or deploy practical millimeter-wave cellular systems. In this paper, measurements for outdoor cellular channels at 38 GHz were made in an urban environment with a broadband (800-MHz RF passband bandwidth) sliding correlator channel sounder. Extensive angle of arrival, path loss, and multipath time delay spread measurements were conducted for steerable beam antennas of differing gains and beamwidths for a wide variety of transmitter and receiver locations. Coverage outages and the likelihood of outage with steerable antennas were also measured to determine how random receiver locations with differing antenna gains and link budgets could perform in future cellular systems. This paper provides measurements and models that may be used to design future fifth-generation millimeter-wave cellular networks and gives insight into antenna beam steering algorithms for these systems.

ADVERTISEMENT RETURN TO ISSUEPREVArticleNEXTPlastic Optical Fiber Lasers and Amplifiers Containing Lanthanide ComplexesKen Kuriki, Yasuhiro Koike, and Yoshi OkamotoView Author Information Faculty of Science and Technology, Keio University, Yokohama, Kanagawa 223-8522, Japan, JST ERATO, Koike Photonics Polymer Project, K2 TOWN CAMPUS, 144-8 Ogura, Saiwai-ku, Kawasaki, Kanagawa, 212-0054, Japan Department of Chemistry and Polymer Research Institute, Polytechnic University, 6-Metrotech Center, Brooklyn, New York 11201 Cite this: Chem. Rev. 2002, 102, 6, 2347–2356Publication Date (Web):May 7, 2002Publication History Received8 November 2001Published online7 May 2002Published inissue 1 June 2002https://pubs.acs.org/doi/10.1021/cr010309ghttps://doi.org/10.1021/cr010309gresearch-articleACS PublicationsCopyright © 2002 American Chemical SocietyRequest reuse permissionsArticle Views4181Altmetric-Citations781LEARN ABOUT THESE METRICSArticle Views are the COUNTER-compliant sum of full text article downloads since November 2008 (both PDF and HTML) across all institutions and individuals. These metrics are regularly updated to reflect usage leading up to the last few days.Citations are the number of other articles citing this article, calculated by Crossref and updated daily. Find more information about Crossref citation counts.The Altmetric Attention Score is a quantitative measure of the attention that a research article has received online. Clicking on the donut icon will load a page at altmetric.com with additional details about the score and the social media presence for the given article. Find more information on the Altmetric Attention Score and how the score is calculated. Share Add toView InAdd Full Text with ReferenceAdd Description ExportRISCitationCitation and abstractCitation and referencesMore Options Share onFacebookTwitterWechatLinked InRedditEmail Other access optionsGet e-Alertsclose SUBJECTS:Coordination compounds,Fibers,Fluorescence,Lasers,Plastics Get e-Alerts

This paper summarizes recent contributions in the broad area of energy harvesting wireless communications. In particular, we provide the current state of the art for wireless networks composed of energy harvesting nodes, starting from the information-theoretic performance limits to transmission scheduling policies and resource allocation, medium access, and networking issues. The emerging related area of energy transfer for self-sustaining energy harvesting wireless networks is considered in detail covering both energy cooperation aspects and simultaneous energy and information transfer. Various potential models with energy harvesting nodes at different network scales are reviewed, as well as models for energy consumption at the nodes.