Universidade Tiradentes

Fabrication of three dimensional (3D) organoids with controlled microarchitectures has been shown to enhance tissue functionality. Bioprinting can be used to precisely position cells and cell-laden materials to generate controlled tissue architecture. Therefore, it represents an exciting alternative for organ fabrication. Despite the rapid progress in the field, the development of printing processes that can be used to fabricate macroscale tissue constructs from ECM-derived hydrogels has remained a challenge. Here we report a strategy for bioprinting of photolabile cell-laden methacrylated gelatin (GelMA) hydrogels. We bioprinted cell-laden GelMA at concentrations ranging from 7 to 15% with varying cell densities and found a direct correlation between printability and the hydrogel mechanical properties. Furthermore, encapsulated HepG2 cells preserved cell viability for at least eight days following the bioprinting process. In summary, this work presents a strategy for direct-write bioprinting of a cell-laden photolabile ECM-derived hydrogel, which may find widespread application for tissue engineering, organ printing and the development of 3D drug discovery platforms.

Experience economy is the last segment in the evolution of the market, and it is characterized by the fact that consumers do not acquire goods, products or services, but experiences that they integrate in their biography, and consequently in their identity. Customer Experience, possibly the latest revolution in business thinking along with the digital transformation, seeks the design and management of truly customer-centric experiences. This revolution is spreading across different sectors, among which the health sector should necessarily be considered. This talk covers the fundamental ideas within the concept of customer experience, as well as it provides information and suggestions about how to design and deliver an optimal patient experience.

Antibiotic resistance is one of the greatest challenges in the health system nowadays, representing a serious problem for public health. Initially, antibiotic-resistant strains were restricted to the hospital environment, but now they can be found everywhere. Globalization, excessive use of antibiotics in animal husbandry and aquaculture, use of multiple broad-spectrum agents, and lack of good antimicrobial stewardship can be listed as the factors most responsible for the spread of antibiotic resistance. The increase in the prevalence of antibiotic-resistant pathogens implies having fewer antimicrobial agents to treat infections. The estimate is that by 2050, there will be no effective antibiotic available, if no new drug is developed or discovered. This raises the need to search for alternative methods of controlling antibiotic-resistant pathogens. Considering this problem, the objective of this review is to outline the most frequent antibiotic-resistant bacteria and describe the advantageous and limitations of alternative methods that have been proposed to control them.

Nanotechnology refers to the control, manipulation, study and manufacture of structures and devices at the nanometer size range. The small size, customized surface, improved solubility and multi-functionality of nanoparticles will continue to create new biomedical applications, as nanoparticles allow to dominate stability, solubility and bioavailability, as well controlled release of drugs. The type of a nanoparticle, and its related chemical, physical and morphological properties influence its interaction with living cells, as well as determine the route of clearance and possible toxic effects. This field requires cross-disciplinary research and gives opportunities to design and develop multifunctional devices, which allow the diagnosis and treatment of devastating diseases. Over the past few decades, biodegradable polymers have been studied for the fabrication of drug delivery systems. There was extensive development of biodegradable polymeric nanoparticles for drug delivery and tissue engineering, in view of their applications in controlling the release of drugs, stabilizing labile molecules from degradation and site-specific drug targeting. The primary aim is to reduce dosing frequency and prolong the therapeutic outcomes. For this purpose, inert excipients should be selected, being biopolymers, e.g. sodium alginate, commonly used in controlled drug delivery. Nanoparticles composed of alginate (known as anionic polysaccharide widely distributed in the cell walls of brown algae which, when in contact with water, forms a viscous gum) have emerged as one of the most extensively characterized biomaterials used for drug delivery and targeting a set of administration routes. Their advantages include not only the versatile physicochemical properties, which allow chemical modifications for site-specific targeting but also their biocompatibility and biodegradation profiles, as well as mucoadhesiveness. Furthermore, mechanical strength, gelation, and cell affinity can be modulated by combining alginate nanoparticles with other polymers, surface tailoring using specific targeting moieties and by chemical or physical cross-linking. However, for every physicochemical modification in the macromolecule/ nanoparticles, a new toxicological profile may be obtained. In this paper, the different aspects related to the use of alginate nanoparticles for drug delivery and targeting have been revised, as well as how their toxicological profile will determine the therapeutic outcome of the drug delivery system.

The main objective of this work is to investigate the effect of a set of crude oil emulsion variables, including pH and salt and water contents, upon the microwave demulsification process. A series of batch demulsification runs were carried out to evaluate the final emulsified water content of emulsion samples after the exposure to microwaves. Tests were performed at distinct heating temperatures, using water-in-heavy crude oil emulsion samples containing different salt and water contents and pH. Well-defined temperature programs were established to control the amount of energy applied to the emulsion and, ultimately, the viscosity. Higher microwave demulsification efficiencies were achieved for emulsions containing high water contents, except when high pH and salt contents were simultaneously involved.

Objetivo: realizar uma análise sobre as consequências na saúde mental advindas do período de isolamento social durante a pandemia de COVID-19 e de prenunciar estratégias de enfrentamento para minimizá-las. Metodologia: trata-se de uma revisão integrativa da literatura, realizada a partir da busca por publicações científicas indexadas nas bases de dados: MEDLINE via PubMed, Europe PMC, Lilacs e SciELO. Os seguintes descritores foram utilizados: COVID-19, isolamento social, pandemias e saúde mental. Ao final das buscas, 49 publicações atenderam aos critérios de elegibilidade e foram selecionadas para compor o estudo. Resultados: diante dos achados extraídos dos estudos selecionados, percebeu-se que os indivíduos submetidos ao isolamento social estão mais suscetíveis a apresentar transtornos de saúde mental, devido à privação e contenção social, surgindo sintomas de sofrimento psíquico, em especial, relacionado ao estresse, ansiedade e depressão. Conclusão: este estudo permitiu refletir sobre a necessidade de garantir uma comunicação clara e informativa sobre estratégias para redução desses sintomas de sofrimento psíquico, além de fornecer o suporte psicológico e social fundamental para esses indivíduos em vulnerabilidade.

Hydrogels are three-dimensional, hydrophilic networks, comprising polymeric chains linked through physical or chemical bonds. In the area of food, hydrogels have great potential to be used in food packaging systems or as carriers of bioactive components. This paper reviews the nature of hydrogels, their 3D network conformation, their functional properties, and their potential applications in food packaging systems. Regarding their potential food packaging applications, hydrogels can present a conformation which allows their use as part of a packaging system to control the humidity generated by food products with high water content. Moreover, the incorporation of nanoparticles into hydrogels may grant them antimicrobial activity. Finally, although the current research in this field is still limited, the results obtained so far are promising for innovative and potential applications in the food field, which also include their integration into intelligent food packaging systems and their direct incorporation into food matrices as a flavor carrier system.

BACKGROUND: Older adults are more likely to live alone, because they may have been predeceased by their spouse and friends. Social interaction could also be reduced in this age group due by limited mobility caused by chronic conditions. Therefore, aging is frequently accompanied by reduced social support, which might affect health status. Little is known about the role of gender in the relationship between social support and health in older adults. Hence, the present study tests the hypothesis that gender differences exist in the relationship between perceived social support, social network, and self-rated health (SRH) among older adults. METHODS: A cross-sectional study using two-stage probabilistic sampling recruited 3,649 individuals aged 60 years and above. Data were collected during the national influenza vaccination campaign in Rio de Janeiro, Brazil, in 2006. Individual interviews collected information on SRH, perceived social support, social network, and other covariates. Multivariate logistic regression analyses using nested models were conducted separately for males and females. Independent variables were organised into six blocks: (1) perceived social support and social network, (2) age group, (3) socioeconomic characteristics, (4) health-related behaviours, (5) use of health care services, (6) functional status measures and somatic health problems. RESULTS: Older men who did not participate in group activities were more likely to report poor SRH compared to those who did, (OR = 1.63; 95% CI = 1.16-2.30). Low perceived social support predicted the probability of poor SRH in women (OR = 1.64; 95% CI = 1.16-2.34). Poor SRH was associated with low age, low income, not working, poor functional capacity, and depression in both men and women. More somatic health problems were associated with poor SRH in women. CONCLUSIONS: The association between social interactions and SRH varies between genders. Low social network involvement is associated with poor SRH in older men, whereas low perceived social support is associated with poor SRH in older women. The hypothesis that the relationship of perceived social support and social networks to SRH differs according to gender has been confirmed.

The variations in the chemical composition, and consequently, on the biological activity of the propolis, are associated with its type and geographic origin. Considering this fact, this study evaluated propolis extracts obtained by supercritical extraction (SCO2) and ethanolic extraction (EtOH), in eight samples of different types of propolis (red, green and brown), collected from different regions in Brazil. The content of phenolic compounds, flavonoids, in vitro antioxidant activity (DPPH and ABTS), Artepillin C, p-coumaric acid and antimicrobial activity against two bacteria were determined for all extracts. For the EtOH extracts, the anti-proliferative activity regarding the cell lines of B16F10, were also evaluated. Amongst the samples evaluated, the red propolis from the Brazilian Northeast (states of Sergipe and Alagoas) showed the higher biological potential, as well as the larger content of antioxidant compounds. The best results were shown for the extracts obtained through the conventional extraction method (EtOH). However, the highest concentrations of Artepillin C and p-coumaric acid were identified in the extracts from SCO2, indicating a higher selectivity for the extraction of these compounds. It was verified that the composition and biological activity of the Brazilian propolis vary significantly, depending on the type of sample and geographical area of collection.

Density is an important biodiesel parameter, with impact on fuel quality. Predicting density is of high relevance for a correct formulation of an adequate blend of raw materials that optimize the cost of biodiesel fuel production while allowing the produced fuel to meet the required quality standards. The aim of this work is to present new density data for different biodiesels and use the reported data to evaluate the predictive capability of models previously proposed to predict biodiesel or fatty acid methyl ester densities. Densities were measured here for 10 biodiesel samples, for which detailed composition is reported, at atmospheric pressure and temperatures from 278.15 to 373.15 K. Density dependence with temperature correlations was proposed for the biodiesels, and isobaric expansivities are presented. The new experimental data presented here were used along with other literature data to evaluate predictive density models, such as those based on Kay’s mixing rules and the GCVOL group contribution method. It is shown that Kay’s mixing rules and a revised form of the GCVOL model are able to predict biodiesel densities with average deviations of only 0.3%. A comparison between biodiesel densities produced from similar vegetable oils, by different authors, highlights the importance of knowing the detailed composition of the samples. An extension of GCVOL for high pressures is also proposed here. It is shown that it can predict the densities of biodiesel fuels with average deviations less than 0.4%.

OBJECTIVE: Anxiety as a uni- or multidimensional construct has been under discussion. The unidimensional approach assumes that there is a general trait anxiety, which predisposes the individuals to increases in state anxiety in various threatening situations. In this case, there should be a correlation between state and trait anxiety in any situation of threat. Therefore, the aim of this study was to investigate the correlation between trait and state anxiety in participants exposed to two different anxiogenic situations: interpersonal threat (Video-Monitored Stroop Test - VMST) and physical threat (third molar extraction - TME). METHODS: Participants with various levels of trait anxiety (general trait: State-Trait Anxiety Inventory - STAI, Hospital Anxiety and Depression Scale; specific trait: Social Phobia Inventory, Dental Anxiety Scale) had their anxious state evaluated (STAI, self-evaluation of tension level, heart rate, electromyogram activity) before, during and after the VMST or the TME. RESULTS: In VMST, trait anxiety correlated to state anxiety (psychological parameters) in all test phases. However, in TME, the only trait measurement that correlated to state anxiety (psychological parameters) was the Dental Anxiety Scale. CONCLUSION: Trait anxiety correlates positively to state anxiety in situations of interpersonal threat, but not of physical threat.

Propolis is known for its biological properties and its preparations have been continuously investigated in an attempt to solve the problem of their standardization, an issue that limits the use of propolis in food and pharmaceutical industries. The aim of this study was to evaluate in vitro antioxidant, antimicrobial, antiparasitic, and cytotoxic effects of extracts of red, green, and brown propolis from different regions of Brazil, obtained by ethanolic and supercritical extraction methods. We found that propolis extracts obtained by both these methods showed concentration-dependent antioxidant activity. The extracts obtained by ethanolic extraction showed higher antioxidant activity than that shown by the extracts obtained by supercritical extraction. Ethanolic extracts of red propolis exhibited up to 98% of the maximum antioxidant activity at the highest extract concentration. Red propolis extracts obtained by ethanolic and supercritical methods showed the highest levels of antimicrobial activity against several bacteria. Most extracts demonstrated antimicrobial activity against Staphylococcus aureus. None of the extracts analyzed showed activity against Escherichia coli or Candida albicans. An inhibitory effect of all tested ethanolic extracts on the growth of Trypanosoma cruzi Y strain epimastigotes was observed in the first 24 h. However, after 96 h, a persistent inhibitory effect was detected only for red propolis samples. Only ethanolic extracts of red propolis samples R01Et.B2 and R02Et.B2 showed a cytotoxic effect against all four cancer cell lines tested (HL-60, HCT-116, OVCAR-8, and SF-295), indicating that red propolis extracts have great cytotoxic potential. The biological effects of ethanolic extracts of red propolis revealed in the present study suggest that red propolis can be a potential alternative therapeutic treatment against Chagas disease and some types of cancer, although high activity of red propolis in vitro needs to be confirmed by future in vivo investigations.

Diabetes mellitus (DM) is a metabolic disorder characterized by chronic hyperglycemia together with disturbances in the metabolism of carbohydrates, proteins and fat, which in general results from an insulin availability and need imbalance. In a great number of patients, marketed anti-glycemic agents have shown poor effectiveness in maintaining a long-term glycemic control, thus being associated with severe adverse effects and leading to an emerging interest in natural compounds (e.g., essential oils and other secondary plant metabolites, namely, flavonoid-rich compounds) as a novel approach for prevention, management and/or treatment of either non-insulin-dependent diabetes mellitus (T2DM, type 2 DM) and/or Metabolic Syndrome (MS). In this review, some of these promising glucose-lowering agents will be comprehensively discussed.

Cosmetics composed of synthetic and/or semi-synthetic polymers, associated or not with natural polymers, exhibit a dashing design, with thermal and chemo-sensitive properties. Cosmetic polymers are also used for the preparation of nanoparticles for the delivery of, e.g., fragrances, with the purpose to modify their release profile and also reducing the risk of evaporation. Besides, other cosmetically active nutrients, dermal permeation enhancers, have also been loaded into nanoparticles to improve their bioactivities on the skin. The use of natural polymers in cosmetic formulations is of particular relevance because of their biocompatible, safe, and eco-friendly character. These formulations are highly attractive and marketable to consumers, and are suitable for a plethora of applications, including make-up, skin, and hair care, and as modifiers and stabilizers. In this review, natural synthetic, semi-synthetic, and synthetic polymers are discussed considering their properties for cosmetic applications. Their uses in conventional and novel formulations are also presented.

The potential use of ionic liquids (ILs) as adjuvants in typical polymer-salt aqueous systems for the separation and purification of vital biomolecules is investigated. An innovative study involving the addition of various imidazolium-based ILs to conventional PEG/inorganic salt aqueous biphasic systems (ABS), aiming at controlling their phase behaviour and extraction capability for L-tryptophan, is carried out here. For this purpose, phase diagrams and respective tie-lines for PEG 600/Na2SO4 ABS with the addition of small quantities of IL were established. In addition, the partition coefficients of L-tryptophan were determined in those systems. The results obtained indicate that the addition of small amounts of IL to the typical PEG/inorganic salt aqueous systems could largely control the extraction efficiency for L-tryptophan, and that efficiency depends on the IL employed. Salting-in inducing ILs enhance the partition coefficient of L-tryptophan for the PEG-rich phase while salting-out inducing ILs decrease the partitioning of the amino acid. These results are an interesting advance in biotechnological separation processes regarding the extraction of biomolecules that could be used instead of the common approach of PEG functionalization.

AIM: The purpose of this study was to find out the prevalence of temporomandibular disorder (TMD) in a sample of university students and its relationship to gender, occlusion, and psychological factors. MATERIALS AND METHODS: The sample comprised 196 subjects, aged 18-25 years. The TMD degree was evaluated using an anamnestic questionnaire. Morphologic occlusion was evaluated according to Angle classification (classes I, II, and III). The Hospital Anxiety and Depression Scale (HADS), a 14-item self-administered rating scale developed specifically to identify anxiety and depression in nonpsychiatric medical outpatients, was used to assess the levels of anxiety (HADSa) and depression (HADSd). STATISTICAL ANALYSIS: The incidence of TMD level, malocclusion, anxiety, and depression in both genders was calculated as percentages. Association between TMD degree and occlusion, HADSa, and HADSd was tested using the Chi-square test. RESULTS: According to our results, 50% of the subjects had TMD, but it was of moderate or severe degree in only 9.18% of them. No statistically significant association could be found between TMD and gender or occlusion. TMD was found to have statistically significant association with HADSa but not with HADSd. CONCLUSION: A high prevalence of TMD was found in this student population; however, most of the cases could be classified as mild. Of the variables studied, only HADSa had a statistically significant association with TMD.

The production and consumption of beer plays a significant role in the social, political, and economic activities of many societies. During brewing fermentation step, many volatile and phenolic compounds are produced. They bring several organoleptic characteristics to beer and also provide an identity for regional producers. In this review, the beer compounds synthesis, and their role in the chemical and sensory properties of craft beers, and potential health benefits are described. This review also describes the importance of fermentation for the brewing process, since alcohol and many volatile esters are produced and metabolized in this step, thus requiring strict control. Phenolic compounds are also present in beer and are important for human health since it was proved that many of them have antitumor and antioxidant activities, which provides valuable data for moderate dietary beer inclusion studies.

Eukaryotic chromosomes are confined to the nucleus, which is separated from the rest of the cell by two concentric membranes known as the nuclear envelope (NE). The NE is punctuated by holes known as nuclear pore complexes (NPCs), which provide the main pathway for transport of cellular material across the nuclear-cytoplasmic boundary. The single NPC is a complicated octameric structure containing more than 100 proteins called nucleoporins. NPCs function as transport machineries for inorganic ions and macromolecules. The most prominent feature of an individual NPC is a large central channel, ~7 nm in width and 50 nm in length. NPCs exhibit high morphological and functional plasticity, adjusting shape to function. Macromolecules ranging from 1 to >100 kDa travel through the central channel into (and out of) the nucleoplasm. Inorganic ions have additional pathways for communication between cytosol and nucleus. NE can turn from a simple sieve that separates two compartments by a given pore size to a smart barrier that adjusts its permeabiltiy to the metabolic demands of the cell. Early microelectrode work characterizes the NE as a membrane barrier of highly variable permeability, indicating that NPCs are under regulatory control. Electrical voltage across the NE is explained as the result of electrical charge separation due to selective barrier permeability and unequal distribution of charged macromolecules across the NE. Patch-clamp work discovers NE ion channel activity associated with NPC function. From comparison of early microelectrode work with patch-clamp data and late results obtained by the nuclear hourglass technique, it is concluded that NPCs are well-controlled supramolecular structures that mediate transport of macromolecules and small ions by separate physical pathways, the large central channel and the small peripheral channels, respectively. Electrical properties of the two pathways are still unclear but could have great impact on the understanding of signal transfer across NE and gene expression.

Surfactants are amphiphilic compounds having hydrophilic and hydrophobic moieties in their structure. They can be of synthetic or of microbial origin, obtained respectively from chemical synthesis or from microorganisms' activity. A new generation of ecofriendly surfactant molecules or biobased surfactants is increasingly growing, attributed to their versatility of applications. Surfactants can be used as drug delivery systems for a range of molecules given their capacity to create micelles which can promote the encapsulation of bioactives of pharmaceutical interest; besides, these assemblies can also show antimicrobial properties. The advantages of biosurfactants include their high biodegradability profile, low risk of toxicity, production from renewable sources, functionality under extreme pH and temperature conditions, and long-term physicochemical stability. The application potential of these types of polymers is related to their properties enabling them to be processed by emulsification, separation, solubilization, surface (interfacial) tension, and adsorption for the production of a range of drug delivery systems. Biosurfactants have been employed as a drug delivery system to improve the bioavailability of a good number of drugs that exhibit low aqueous solubility. The great potential of these molecules is related to their auto assembly and emulsification capacity. Biosurfactants produced from bacteria are of particular interest due to their antibacterial, antifungal, and antiviral properties with therapeutic and biomedical potential. In this review, we discuss recent advances and perspectives of biosurfactants with antimicrobial properties and how they can be used as structures to develop semisolid hydrogels for drug delivery, in environmental bioremediation, in biotechnology for the reduction of production costs and also their ecotoxicological impact as pesticide alternative.

Research in the pathogenesis of inflammatory skin diseases, such as skin dermatitis and psoriasis, has experienced some relevant breakthroughs in recent years. The understanding of age-related factors, gender, and genetic predisposition of these multifactorial diseases has been instrumental for the development of new pharmacological and technological treatment approaches. In this review, we discuss the molecular mechanisms behind the pathological features of psoriasis, also addressing the currently available treatments and novel therapies that are under clinical trials. Innovative therapies developed over the last 10 years have been researched. In this area, advantages of nanotechnological approaches to provide an effective drug concentration in the disease site are highlighted, together with microneedles as innovative candidates for drug delivery systems in psoriasis and other inflammatory chronic skin diseases.