University of Siegen

The Review summarizes much of particle physics and cosmology. Using data from previous editions, plus 2,873 new measurements from 758 papers, we list, evaluate, and average measured properties of gauge bosons and the recently discovered Higgs boson, leptons, quarks, mesons, and baryons. We summarize searches for hypothetical particles such as supersymmetric particles, heavy bosons, axions, dark photons, etc. Particle properties and search limits are listed in Summary Tables. We give numerous tables, figures, formulae, and reviews of topics such as Higgs Boson Physics, Supersymmetry, Grand Unified Theories, Neutrino Mixing, Dark Energy, Dark Matter, Cosmology, Particle Detectors, Colliders, Probability and Statistics. Among the 118 reviews are many that are new or heavily revised, including a new review on Neutrinos in Cosmology.Starting with this edition, the Review is divided into two volumes. Volume 1 includes the Summary Tables and all review articles. Volume 2 consists of the Particle Listings. Review articles that were previously part of the Listings are now included in volume 1.The complete Review (both volumes) is published online on the website of the Particle Data Group (http://pdg.lbl.gov) and in a journal. Volume 1 is available in print as the PDG Book. A Particle Physics Booklet with the Summary Tables and essential tables, figures, and equations from selected review articles is also available.The 2018 edition of the Review of Particle Physics should be cited as: M. Tanabashi et al. (Particle Data Group), Phys. Rev. D 98, 030001 (2018).

Abstract The Review summarizes much of particle physics and cosmology. Using data from previous editions, plus 2,143 new measurements from 709 papers, we list, evaluate, and average measured properties of gauge bosons and the recently discovered Higgs boson, leptons, quarks, mesons, and baryons. We summarize searches for hypothetical particles such as supersymmetric particles, heavy bosons, axions, dark photons, etc. Particle properties and search limits are listed in Summary Tables. We give numerous tables, figures, formulae, and reviews of topics such as Higgs Boson Physics, Supersymmetry, Grand Unified Theories, Neutrino Mixing, Dark Energy, Dark Matter, Cosmology, Particle Detectors, Colliders, Probability and Statistics. Among the 120 reviews are many that are new or heavily revised, including a new review on Machine Learning, and one on Spectroscopy of Light Meson Resonances. The Review is divided into two volumes. Volume 1 includes the Summary Tables and 97 review articles. Volume 2 consists of the Particle Listings and contains also 23 reviews that address specific aspects of the data presented in the Listings. The complete Review (both volumes) is published online on the website of the Particle Data Group (pdg.lbl.gov) and in a journal. Volume 1 is available in print as the PDG Book. A Particle Physics Booklet with the Summary Tables and essential tables, figures, and equations from selected review articles is available in print, as a web version optimized for use on phones, and as an Android app.

This biennial Review summarizes much of particle physics. Using data from previous editions, plus 2658 new measurements from 644 papers, we list, evaluate, and average measured properties of gauge bosons, leptons, quarks, mesons, and baryons. We summarize searches for hypothetical particles such as Higgs bosons, heavy neutrinos, and supersymmetric particles. All the particle properties and search limits are listed in Summary Tables. We also give numerous tables, figures, formulae, and reviews of topics such as the Standard Model, particle detectors, probability, and statistics. Among the 112 reviews are many that are new or heavily revised including those on Heavy-Quark and Soft-Collinear Effective Theory, Neutrino Cross Section Measurements, Monte Carlo Event Generators, Lattice QCD, Heavy Quarkonium Spectroscopy, Top Quark, Dark Matter, ${V}_{\mathit{cb}}$ ${V}_{\mathit{ub}}$, Quantum Chromodynamics, High-Energy Collider Parameters, Astrophysical Constants, Cosmological Parameters, and Dark Matter.A booklet is available containing the Summary Tables and abbreviated versions of some of the other sections of this full Review. All tables, listings, and reviews (and errata) are also available on the Particle Data Group website: http://pdg.lbl.gov/.The 2012 edition of Review of Particle Physics is published for the Particle Data Group as article 010001 in volume 86 of Physical Review D.This edition should be cited as: J. Beringer et al. (Particle Data Group), Phys. Rev. D 86, 010001 (2012).

Abstract The Review summarizes much of particle physics and cosmology. Using data from previous editions, plus 3,324 new measurements from 878 papers, we list, evaluate, and average measured properties of gauge bosons and the recently discovered Higgs boson, leptons, quarks, mesons, and baryons. We summarize searches for hypothetical particles such as supersymmetric particles, heavy bosons, axions, dark photons, etc. Particle properties and search limits are listed in Summary Tables. We give numerous tables, figures, formulae, and reviews of topics such as Higgs Boson Physics, Supersymmetry, Grand Unified Theories, Neutrino Mixing, Dark Energy, Dark Matter, Cosmology, Particle Detectors, Colliders, Probability and Statistics. Among the 120 reviews are many that are new or heavily revised, including a new review on High Energy Soft QCD and Diffraction and one on the Determination of CKM Angles from B Hadrons. The Review is divided into two volumes. Volume 1 includes the Summary Tables and 98 review articles. Volume 2 consists of the Particle Listings and contains also 22 reviews that address specific aspects of the data presented in the Listings. The complete Review (both volumes) is published online on the website of the Particle Data Group (pdg.lbl.gov) and in a journal. Volume 1 is available in print as the PDG Book. A Particle Physics Booklet with the Summary Tables and essential tables, figures, and equations from selected review articles is available in print and as a web version optimized for use on phones as well as an Android app.

Author(s): Collaboration, The ATLAS; Aad, G; Abat, E; Abdallah, J; Abdelalim, AA; Abdesselam, A; Abdinov, O; Abi, BA; Abolins, M; Abramowicz, H; Acerbi, E; Acharya, BS; Achenbach, R; Ackers, M; Adams, DL; Adamyan, F; Addy, TN; Aderholz, M; Adorisio, C; Adragna, P; Aharrouche, M; Ahlen, SP; Ahles, F; Ahmad, A; Ahmed, H; Aielli, G; Åkesson, PF; Åkesson, TPA; Akimov, AV; Alam, SM; Albert, J; Albrand, S; Aleksa, M; Aleksandrov, IN; Aleppo, M; Alessandria, F; Alexa, C; Alexander, G; Alexopoulos, T; Alimonti, G; Aliyev, M; Allport, PP; Allwood-Spiers, SE; Aloisio, A; Alonso, J; Alves, R; Alviggi, MG; Amako, K; Amaral, P; Amaral, SP; Ambrosini, G; Ambrosio, G; Amelung, C; Ammosov, VV; Amorim, A; Amram, N; Anastopoulos, C; Anderson, B; Anderson, KJ; Anderssen, EC; Andreazza, A; Andrei, V; Andricek, L; Andrieux, M-L; Anduaga, XS; Anghinolfi, F; Antonaki, A; Antonelli, M; Antonelli, S; Apsimon, R; Arabidze, G; Aracena, I; Arai, Y; Arce, ATH; Archambault, JP; Arguin, J-F; Arik, E; Arik, M; Arms, KE; Armstrong, SR; Arnaud, M; Arnault, C; Artamonov, A; Asai, S; Ask, S

The summarizes much of particle physics and cosmology. Using data from previous editions, plus 2,717 new measurements from 869 papers, we list, evaluate, and average measured properties of gauge bosons and the recently discovered Higgs boson, leptons, quarks, mesons, and baryons. We summarize searches for hypothetical particles such as supersymmetric particles, heavy bosons, axions, dark photons, etc. Particle properties and search limits are listed in Summary Tables. We give numerous tables, figures, formulae, and reviews of topics such as Higgs Boson Physics, Supersymmetry, Grand Unified Theories, Neutrino Mixing, Dark Energy, Dark Matter, Cosmology, Particle Detectors, Colliders, Probability and Statistics. Most of the 120 reviews are updated, including many that are heavily revised. The is divided into two volumes. Volume 1 includes the Summary Tables and 97 review articles. Volume 2 consists of the Particle Listings and contains also 23 reviews that address specific aspects of the data presented in the Listings. The complete (both volumes) is published online on the website of the Particle Data Group () and in a journal. Volume 1 is available in print as the . A with the Summary Tables and essential tables, figures, and equations from selected review articles is available in print, as a web version optimized for use on phones, and as an Android app. The 2024 edition of the Review of Particle Physics should be cited as: S. Navas et al. (Particle Data Group), Phys. Rev. D 110, 030001 (2024) © 2024 2024

This report describes the 2005 version of the Fluka particle transport code. The first part introduces the basic notions, describes the modular structure of the system, and contains an installation and beginner's guide. The second part complements this initial information with details about the various components of Fluka and how to use them. It concludes with a detailed history and bibliography.

Individual graphene oxide sheets subjected to chemical reduction were electrically characterized as a function of temperature and external electric fields. The fully reduced monolayers exhibited conductivities ranging between 0.05 and 2 S/cm and field effect mobilities of 2-200 cm2/Vs at room temperature. Temperature-dependent electrical measurements and Raman spectroscopic investigations suggest that charge transport occurs via variable range hopping between intact graphene islands with sizes on the order of several nanometers. Furthermore, the comparative study of multilayered sheets revealed that the conductivity of the undermost layer is reduced by a factor of more than 2 as a consequence of the interaction with the Si/SiO2 substrate.

This paper presents a predictive current control method and its application to a voltage source inverter. The method uses a discrete-time model of the system to predict the future value of the load current for all possible voltage vectors generated by the inverter. The voltage vector which minimizes a quality function is selected. The quality function used in this work evaluates the current error at the next sampling time. The performance of the proposed predictive control method is compared with hysteresis and pulsewidth modulation control. The results show that the predictive method controls very effectively the load current and performs very well compared with the classical solutions

Whereas standard transmission electron microscopy studies are unable to preserve the native state of chemically reactive and beam-sensitive battery materials after operation, such materials remain pristine at cryogenic conditions. It is then possible to atomically resolve individual lithium metal atoms and their interface with the solid electrolyte interphase (SEI). We observe that dendrites in carbonate-based electrolytes grow along the <111> (preferred), <110>, or <211> directions as faceted, single-crystalline nanowires. These growth directions can change at kinks with no observable crystallographic defect. Furthermore, we reveal distinct SEI nanostructures formed in different electrolytes.

A measurement of the Higgs boson mass is presented based on the combined data samples of the ATLAS and CMS experiments at the CERN LHC in the H→γγ and H→ZZ→4ℓ decay channels. The results are obtained from a simultaneous fit to the reconstructed invariant mass peaks in the two channels and for the two experiments. The measured masses from the individual channels and the two experiments are found to be consistent among themselves. The combined measured mass of the Higgs boson is m_{H}=125.09±0.21 (stat)±0.11 (syst) GeV.

The physics model implemented inside the FLUKA code are briefly described, with emphasis on hadronic interactions. Examples of the capabilities of the code are presented including basic (thin target) and complex benchmarks.

Like most of the materials used by humans, polymeric materials are proposed in the literature and occasionally exploited clinically, as such, as devices or as part of devices, by surgeons, dentists, and pharmacists to treat traumata and diseases. Applications have in common the fact that polymers function in contact with animal and human cells, tissues, and/or organs. More recently, people have realized that polymers that are used as plastics in packaging, as colloidal suspension in paints, and under many other forms in the environment, are also in contact with living systems and raise problems related to sustainability, delivery of chemicals or pollutants, and elimination of wastes. These problems are basically comparable to those found in therapy. Last but not least, biotechnology and renewable resources are regarded as attractive sources of polymers. In all cases, water, ions, biopolymers, cells, and tissues are involved. Polymer scientists, therapists, biologists, and ecologists should thus use the same terminology to reflect similar properties, phenomena, and mechanisms. Of particular interest is the domain of the so-called “degradable or biodegradable polymers” that are aimed at providing materials with specific time-limited applications in medicine and in the environment where the respect of living systems, the elimination, and/or the bio-recycling are mandatory, at least ideally.

Affect recognition aims to detect a person's affective state based on observables, with the goal to e.g. improve human-computer interaction. Long-term stress is known to have severe implications on wellbeing, which call for continuous and automated stress monitoring systems. However, the affective computing community lacks commonly used standard datasets for wearable stress detection which a) provide multimodal high-quality data, and b) include multiple affective states. Therefore, we introduce WESAD, a new publicly available dataset for wearable stress and affect detection. This multimodal dataset features physiological and motion data, recorded from both a wrist- and a chest-worn device, of 15 subjects during a lab study. The following sensor modalities are included: blood volume pulse, electrocardiogram, electrodermal activity, electromyogram, respiration, body temperature, and three-axis acceleration. Moreover, the dataset bridges the gap between previous lab studies on stress and emotions, by containing three different affective states (neutral, stress, amusement). In addition, self-reports of the subjects, which were obtained using several established questionnaires, are contained in the dataset. Furthermore, a benchmark is created on the dataset, using well-known features and standard machine learning methods. Considering the three-class classification problem ( baseline vs. stress vs. amusement ), we achieved classification accuracies of up to 80%,. In the binary case ( stress vs. non-stress ), accuracies of up to 93%, were reached. Finally, we provide a detailed analysis and comparison of the two device locations ( chest vs. wrist ) as well as the different sensor modalities.

Combined ATLAS and CMS measurements of the Higgs boson production and decay rates, as well as constraints on its couplings to vector bosons and fermions, are presented. The combination is based on the analysis of five production processes, namely gluon fusion, vector boson fusion, and associated production with a W or a Z boson or a pair of top quarks, and of the six decay modes H → ZZ, W W , γγ, ττ, bb, and μμ. All results are reported assuming a value of 125.09 GeV for the Higgs boson mass, the result of the combined measurement by the ATLAS and CMS experiments. The analysis uses the CERN LHC proton-proton collision data recorded by the ATLAS and CMS experiments in 2011 and 2012, corresponding to integrated luminosities per experiment of approximately 5 fb$^{−1}$ at $\sqrt{s}$=7 TeV and 20 fb−1 at $\sqrt{s}$=8 TeV. The Higgs boson production and decay rates measured by the two experiments are combined within the context of three generic parameterisations: two based on cross sections and branching fractions, and one on ratios of coupling modifiers. Several interpretations of the measurements with more model-dependent parameterisations are also given. The combined signal yield relative to the Standard Model prediction is measured to be 1.09 ± 0.11. The combined measurements lead to observed significances for the vector boson fusion production process and for the H → ττ decay of 5.4 and 5.5 standard deviations, respectively. The data are consistent with the Standard Model predictions for all parameterisations considered.

It is of great importance for the development of new products to find the best possible topology or layout for given design objectives and constraints at a very early stage of the design process (the conceptual and project definition phase). Thus, over the last decade, substantial efforts of fundamental research have been devoted to the development of efficient and reliable procedures for solution of such problems. During this period, the researchers have been mainly occupied with two different kinds of topology design processes; the Material or Microstructure Technique and the Geometrical or Macrostructure Technique. It is the objective of this review paper to present an overview of the developments within these two types of techniques with special emphasis on optimum topology and layout design of linearly elastic 2D and 3D continuum structures. Starting from the mathematical-physical concepts of topology and layout optimization, several methods are presented and the applicability is illustrated by a number of examples. New areas of application of topology optimization are discussed at the end of the article. This review article includes 425 references.

Mobile metal ions: Halide-substituted lithium argyrodites form a new class of Li-rich solids with an unusually high Li mobility. Single-crystal X-ray studies (see picture; Li black, S yellow, I red) at room temperature and MAS-NMR measurements in a wide temperature range provide insights into the Li+ ion dynamics.

Unmanned aerial vehicles (UAVs), or aerial drones, are an emerging technology with significant market potential. UAVs may lead to substantial cost savings in, for instance, monitoring of difficult‐to‐access infrastructure, spraying fields and performing surveillance in precision agriculture, as well as in deliveries of packages. In some applications, like disaster management, transport of medical supplies, or environmental monitoring, aerial drones may even help save lives. In this article, we provide a literature survey on optimization approaches to civil applications of UAVs. Our goal is to provide a fast point of entry into the topic for interested researchers and operations planning specialists. We describe the most promising aerial drone applications and outline characteristics of aerial drones relevant to operations planning. In this review of more than 200 articles, we provide insights into widespread and emerging modeling approaches. We conclude by suggesting promising directions for future research.

In response to the 2013 Update of the European Strategy for Particle Physics, the Future Circular Collider (FCC) study was launched, as an international collaboration hosted by CERN. This study covers a highest-luminosity high-energy lepton collider (FCC-ee) and an energy-frontier hadron collider (FCC-hh), which could, successively, be installed in the same 100 km tunnel. The scientific capabilities of the integrated FCC programme would serve the worldwide community throughout the 21st century. The FCC study also investigates an LHC energy upgrade, using FCC-hh technology. This document constitutes the second volume of the FCC Conceptual Design Report, devoted to the electron-positron collider FCC-ee. After summarizing the physics discovery opportunities, it presents the accelerator design, performance reach, a staged operation scenario, the underlying technologies, civil engineering, technical infrastructure, and an implementation plan. FCC-ee can be built with today's technology. Most of the FCC-ee infrastructure could be reused for FCC-hh. Combining concepts from past and present lepton colliders and adding a few novel elements, the FCC-ee design promises outstandingly high luminosity. This will make the FCC-ee a unique precision instrument to study the heaviest known particles (Z, W and H bosons and the top quark), offering great direct and indirect sensitivity to new physics.

This paper is a summary of the "Best Practice Guideline" (BPG) document (Franke et al., 2007) produced in the framework of the European COST Action 732 "Quality assurance and improvement of micro-scale meteorological models", available from the site given in the reference section. The full document provides guidelines for undertaking simulations that are used to evaluate micro-scale obstacle-accommodating meteorological models. This paper provides an overview of the topics covered in the full document without reproducing the specific recommendations.