Walailak University

IMPORTANCE: The Global Burden of Diseases, Injuries, and Risk Factors Study 2019 (GBD 2019) provided systematic estimates of incidence, morbidity, and mortality to inform local and international efforts toward reducing cancer burden. OBJECTIVE: To estimate cancer burden and trends globally for 204 countries and territories and by Sociodemographic Index (SDI) quintiles from 2010 to 2019. EVIDENCE REVIEW: The GBD 2019 estimation methods were used to describe cancer incidence, mortality, years lived with disability, years of life lost, and disability-adjusted life years (DALYs) in 2019 and over the past decade. Estimates are also provided by quintiles of the SDI, a composite measure of educational attainment, income per capita, and total fertility rate for those younger than 25 years. Estimates include 95% uncertainty intervals (UIs). FINDINGS: In 2019, there were an estimated 23.6 million (95% UI, 22.2-24.9 million) new cancer cases (17.2 million when excluding nonmelanoma skin cancer) and 10.0 million (95% UI, 9.36-10.6 million) cancer deaths globally, with an estimated 250 million (235-264 million) DALYs due to cancer. Since 2010, these represented a 26.3% (95% UI, 20.3%-32.3%) increase in new cases, a 20.9% (95% UI, 14.2%-27.6%) increase in deaths, and a 16.0% (95% UI, 9.3%-22.8%) increase in DALYs. Among 22 groups of diseases and injuries in the GBD 2019 study, cancer was second only to cardiovascular diseases for the number of deaths, years of life lost, and DALYs globally in 2019. Cancer burden differed across SDI quintiles. The proportion of years lived with disability that contributed to DALYs increased with SDI, ranging from 1.4% (1.1%-1.8%) in the low SDI quintile to 5.7% (4.2%-7.1%) in the high SDI quintile. While the high SDI quintile had the highest number of new cases in 2019, the middle SDI quintile had the highest number of cancer deaths and DALYs. From 2010 to 2019, the largest percentage increase in the numbers of cases and deaths occurred in the low and low-middle SDI quintiles. CONCLUSIONS AND RELEVANCE: The results of this systematic analysis suggest that the global burden of cancer is substantial and growing, with burden differing by SDI. These results provide comprehensive and comparable estimates that can potentially inform efforts toward equitable cancer control around the world.

As the global population grows, and urbanization becomes more prevalent, cities often struggle to provide convenient, secure, and sustainable lifestyles due to the lack of necessary smart technologies. Fortunately, the Internet of Things (IoT) has emerged as a solution to this challenge by connecting physical objects using electronics, sensors, software, and communication networks. This has transformed smart city infrastructures, introducing various technologies that enhance sustainability, productivity, and comfort for urban dwellers. By leveraging Artificial Intelligence (AI) to analyze the vast amount of IoT data available, new opportunities are emerging to design and manage futuristic smart cities. In this review article, we provide an overview of smart cities, defining their characteristics and exploring the architecture of IoT. A detailed analysis of various wireless communication technologies employed in smart city applications is presented, with extensive research conducted to determine the most appropriate communication technologies for specific use cases. The article also sheds light on different AI algorithms and their suitability for smart city applications. Furthermore, the integration of IoT and AI in smart city scenarios is discussed, emphasizing the potential contributions of 5G networks coupled with AI in advancing modern urban environments. This article contributes to the existing literature by highlighting the tremendous opportunities presented by integrating IoT and AI, paving the way for the development of smart cities that significantly enhance the quality of life for urban dwellers while promoting sustainability and productivity. By exploring the potential of IoT, AI, and their integration, this review article provides valuable insights into the future of smart cities, demonstrating how these technologies can positively impact urban environments and the well-being of their inhabitants.

Recent research has suggested that consumers collectively co-create value through consumption practices. This paper provides additional insights into value creation by demonstrating how individual consumers play distinct roles in the value creation process. By focusing on microdimensions of co-consuming groups, we show how individual consumers engage in value creation processes in the context of brand culture. We bring together concepts of value creation, working consumers, and double exploitation to demonstrate the roles played by consumers and communities in value co-creation. We focus on value creation in a particular type of co-consuming group: an online football fan community. Results show that co-consuming groups are platforms for value creation. We argue that double exploitation is not necessarily a threat to consumers because it may instead enable them to play active roles in value co-creation and gain power against brand owners. This paper contributes to the existing literature on brand community and the value co-creation paradigm by: (1) demonstrating the dynamic roles played by consumers in the value co-creation; (2) revealing new forms of consumer organization; and (3) illustrating how working consumers work among themselves in managing brand communities.

Environmental pollution has become a concerning matter to human beings. Flint water crisis in the USA pointed out that pollution by heavy metal is getting worse day by day, predominantly by Lead, Cadmium, Mercury and Arsenic. Despite of not having any biological role in flora and fauna, they exhibit detrimental effect following exposure (acute or chronic). Even at low dose, they affect brain, kidney and heart. Oxidative stress has been termed as cause and effect in heavy metal-induced kidney toxicity. In treatment strategy, different chelating agent, vitamins and minerals are included, though chelating agents has been showed different fatal drawbacks. Interestingly, plants and plants derived compounds had shown possible effectiveness against heavy metals induced kidney toxicity. This review will provide detail information on toxicodynamics of Pb, Cd, Hg and As, treatment strategy along with the possible beneficiary role of plant derived compound to protect kidney.

Polyetherketoneketone (PEKK) is a new evolving polymeric material. The present article comprehensively reviewed an overview of various applications of PEKK in prosthodontics and oral implantology, highlighting its prospects for clinical applications. PEKK biomaterials is an elastic material with good shock absorbance and fracture resistance and present ultra-high performance among all thermoplastic composites for excellent mechanical strength, chemical resistance, and high thermal stability. Available articles on PEKK for dental applications were reviewed from January 1957 to August 2020) using MEDLINE/PubMed, Web of Science, and ScienceDirect resources. PEKK presents suitable physical, mechanical, and chemical properties for applications in prosthodontics and oral implantology. PEKK has good potential for a wide range of dental applications, including tooth restorations, crowns, bridge, endoposts, denture framework, implant-supported fixed prosthesis, and dental implants. PEKK dental implants have shown lesser stress shielding compared to titanium for dental implant applications. Further modifications and improving material properties can result in broader applications in the field of dentistry. Long term evaluations are needed as PEKK is recently applied in dentistry, and there are limited studies published on PEKK.

OctaDist is an interactive and visual program for determination of structural distortion in octahedral coordination complexes such as spin crossover complexes, single-ion magnets, perovskites or metal-organic frameworks. OctaDist computes the octahedral distortion parameters initially designed in the context of the spin-crossover phenomenon and denoted ζ, Σ, and Θ from standard structural files. The program also provides additional tools for molecular analyses and visualization. It emphasizes performance, flexibility, ease of use, application programming interface (API) consistency, and clear documentation. The modules and classes in OctaDist can be easily customized to include new algorithms or analytical tools. OctaDist is cross-platform supported for modern operating systems and is available as open-source distributed under the GNU General Public License version 3.

Type 2 diabetes mellitus is a pathology of heterogeneous etiology characterized by hyperglycemia resulting from lack of insulin action, insulin secretion, or both, and the population with diabetes mellitus is predicted to be about 439 million worldwide by 2030. Prolong diabetes has been related with microvascular complications especially diabetic nephropathy. DN is the most common complication of type 2 diabetes mellitus, and it is the leading cause of end-stage renal disease worldwide. It is crucial to diagnose patients who are more sensible to develop DN for better control of the process of disease. Several factors and mechanisms contribute to the development and outcome of diabetic nephropathy. Microalbuminuria is an early marker of DN and use it as a routine for screening, but the renal damages may be happening even without microalbuminuria. There are several significant kidney damage and disease biomarkers which helps in early detection of DN. An early biomarker may allow earlier diagnosis, treatment reduces DN prevalence and slows DN progression. Therefore, this review focuses on laboratory biomarkers that are earlier, more validation of an early and specific biomarker could potentially make it possible for early diagnosis, treatment, and retardation of progression of diabetic nephropathy.

Opioids are widely used as therapeutic agents against moderate to severe acute and chronic pain. Still, these classes of analgesic drugs have many potential limitations as they induce analgesic tolerance, addiction and numerous behavioural adverse effects that often result in patient non-compliance. As opium and opioids have been traditionally used as painkillers, the exact mechanisms of their adverse reactions over repeated use are multifactorial and not fully understood. Older adults suffer from cancer and non-cancer chronic pain more than younger adults, due to the physiological changes related to ageing and their reduced metabolic capabilities and thus show an increased number of adverse reactions to opioid drugs. All clinically used opioids are μ-opioid receptor agonists, and the major adverse effects are directly or potentially connected to this receptor. Multifunctional opioid ligands or peripherally restricted opioids may elicit fewer adverse effects, as shown in preclinical studies, but these results need reproducibility from further extensive clinical trials. The current review aims to overview various mechanisms involved in the adverse effects induced by opioids, to provide a better understanding of the underlying pathophysiology and, ultimately, to help develop an effective therapeutic strategy to better manage pain.

Marginal soils are traditional stabilised with Portland Cement (PC) when used as a pavement material. The production of PC is however an energy-intensive process and emits a large amount of greenhouse gas into the atmosphere. Geopolymer is an environmentally friendly ‘green’ binder commonly used in building applications but rarely used in pavement applications. The application of geopolymer to marginal soil stabilisation is an innovative approach given the increasing scarcity of virgin quarry materials in many countries. This research investigates the effects of alkali activator and curing time on unconfined compressive strength (UCS) and microstructural characteristics of marginal lateritic soil (LS) stabilised with high calcium fly ash (FA)-based geopolymer, which is novel in the field of pavement geotechnics. The viability of using this stabilised material as a bound pavement material was also evaluated through laboratory evaluation tests. A liquid alkali activator was a mixture of sodium silicate (Na2SiO3) solution and sodium hydroxide (NaOH) solution at various Na2SiO3:NaOH ratios. The results showed that the UCS increased with the curing time and the 7-day UCS for all Na2SiO3:NaOH ratios tested meets the local national standard as pavement bound material for both light and heavy traffic roads. The maximum early strengths at 7 days of curing were found at Na2SiO3:NaOH of 90:10, where calcium silicate hydrate (C-S-H), cementitious products from high calcium FA and Na2SiO3, was found to play a significant role. The sodium alumino silicate hydrate (N-A-S-H) products, being time-dependent, however came into play after a longer duration. The maximum 90-day UCS was found at a Na2SiO3:NaOH ratio of 50:50. This study indicated that marginal LS could be stabilised by high calcium FA-based geopolymer and used as an environmentally friendly pavement material, which would furthermore decrease the need for high-carbon PC. The economical Na2SiO3:NaOH ratio for both light and heavy traffic pavement materials was suggested to be 50:50.

Despite the success rates of dental implants, peri-implantitis presents as the most common complication in implant dentistry. This review discusses various factors associated with peri-implantitis and various available treatments, highlighting their advantages and disadvantages. Relevant articles on peri-implantitis published in English were reviewed from August 2010 to April 2020 in MEDLINE/PubMed, Scopus, and ScienceDirect. The identified risk indicators of peri-implant diseases are plaque, smoking, history of periodontitis, surface roughness, residual cement, emergence angle >30 degrees, radiation therapy, keratinized tissue width, and function time of the implant, sex, and diabetes. Peri-implantitis treatments can be divided into nonsurgical (mechanical, antiseptic, and antibiotics), surface decontamination (chemical and laser), and surgical (air powder abrasive, resective, and regenerative). However, mechanical debridement alone may fail to eliminate the causative bacteria, and this treatment should be combined with other treatments (antiseptics and surgical treatment). Surface decontamination using chemical agents may be used as an adjuvant treatment; however, the definitive clinical benefit is yet not proven. Laser treatment may result in a short-term decrease in periodontal pocket depth, while air powder abrasive is effective in cleaning a previously contaminated implant surface. Surgical elimination of a pocket, bone recontouring and plaque control are also effective for treating peri-implantitis. The current evidence indicates that regenerative approaches to treat peri-implant defects are unpredictable.

Index Fungorum, Species Fungorum and MycoBank are the key fungal nomenclature and taxonomic databases that can be sourced to find taxonomic details concerning fungi, while DNA sequence data can be sourced from the NCBI, EBI and UNITE databases. Nomenclature and ecological data on freshwater fungi can be accessed on http://fungi.life.illinois.edu/ , while http://www.marinespecies.org/provides a comprehensive list of names of marine organisms, including information on their synonymy. Previous websites however have little information on marine fungi and their ecology, beside articles that deal with marine fungi, especially those published in the nineteenth and early twentieth centuries may not be accessible to those working in third world countries. To address this problem, a new website www.marinefungi.org was set up and is introduced in this paper. This website provides a search facility to genera of marine fungi, full species descriptions, key to species and illustrations, an up to date classification of all recorded marine fungi which includes all fungal groups (Ascomycota, Basidiomycota, Blastocladiomycota, Chytridiomycota, Mucoromycota and fungus-like organisms e.g. Thraustochytriales), and listing recent publications. Currently, 1257 species are listed in the marine fungi website ( www.marinefungi.org ), in 539 genera, 74 orders, 168 families, 20 classes and five phyla, with new taxa continuing to be described. The website has curators with specialist mycological expertise who help to provide update data on the classification of marine fungi. This article also reviews knowledge of marine fungi covering a wide range of topics: their higher classification, ecology and world distribution, role in energy transfer in the oceans, origin and new chemical structures. An updated classification of marine fungi is also included. We would like to invite all mycologists to contribute to this innovative website.

Bamboo is the most important non-wood species which is abundantly grows in most of the tropical and subtropical zone. It has developed as a specially valuable and superior alternate for wood composite manufactured, such as for pulp and paper, stripboards, matboards, veneer, plywood, particleboard and fiberboard. Moreover, several researches have used it as raw material for structural composites such as Oriented Strand Board (OSB), Glue Laminated Timber (GLT), Parallel Strip Lumber (PSL) and Oriented Strand Lumber (OSL). Nowadays, there are many kinds of bamboo composite are produced and traded in the world. However, there are several differences between bamboo and wood for example macroscopic and microscopic characteristics, chemical composition, physical and mechanical properties. For this reason, the methods, technology and equipment for wood processing cannot be directly applied in bamboo utilization. Further research is noticeably required on the information on bamboo properties, cost-effective technologies and managements. With modern techniques and adapted technologies, bamboo can be processed into a wide range of products which successfully compete with wood and other raw materials in the future.

BACKGROUND: Malaria is a major mosquito-borne public health problem in Thailand with varied haematological consequences. The study sought to elucidate the haematological changes in people who suspected malaria infection and their possible predictive values of malaria infection. METHODS: Haematological parameters of 4,985 patients, including 703 malaria-infected and 4,282 non-malaria infected, who admitted at Phop Phra Hospital, Tak Province, an area of malaria endemic transmission in Thailand during 2009 were evaluated. RESULTS: The following parameters were significantly lower in malaria-infected patients; red blood cells (RBCs) count, haemoglobin (Hb), platelets count, white blood cells (WBCs) count, neutrophil, monocyte, lymphocyte and eosinophil counts, while mean corpuscular volume (MCV), mean corpuscular haemoglobin (MCH), Mean corpuscular haemoglobin concentration (MCHC), neutrophil-lymphocyte ratio (NLR), and monocyte-lymphocyte ratio (MLR) were higher in comparison to non-malaria infected patients. Patients with platelet counts < 150,000/uL were 31.8 times (odds ratio) more likely to have a malaria infection. Thrombocytopenia was present in 84.9% of malaria-infected patients and was independent of age, gender and nationality (P value < 0.0001). CONCLUSION: Patients infected with malaria exhibited important changes in most of haematological parameters with low platelet, WBCs, and lymphocyte counts being the most important predictors of malaria infection. When used in combination with other clinical and microscopy methods, these parameters could improve malaria diagnosis and treatment.

Changes in blood cell parameters are already a well-known feature of malarial infections. To add to this information, the objective of this study was to investigate the varying effects that different levels of parasite density have on blood cell parameters. Patients diagnosed with malaria at Phobphra Hospital, Tak Province, Thailand between January 1st 2009 and January 1st 2012 were recruited as subjects for data collection. Blood cell parameters of 2,024 malaria-infected patients were evaluated and statistically analyzed. Neutrophil and platelet counts were significantly higher, however, RBC count was significantly lower in patients with P. falciparum infection compared to those with P. vivax infection (p<0.0001). Leukocyte counts were also significantly higher in patients with high parasitemia compared to those with low and moderate parasitemia. In terms of differential leukocyte count, neutrophil count was significantly higher in patients with high parasitemia compared to those with low and moderate parasitemia (p<0.0001). On the other hand, both lymphocyte and monocyte counts were significantly lower in patients with high parasitemia (p<0.0001). RBC count and Hb concentration, as well as platelet count were also significantly reduced (p<0.05) and (p<0.0001), respectively. To summarize, patients infected with different malaria parasites exhibited important distinctive hematological parameters, with neutrophil and eosinophil counts being the two hematological parameters most affected. In addition, patients infected with different malarial densities also exhibited important changes in leukocyte count, platelet count and hemoglobin concentration during the infection. These findings offer the opportunity to recognize and diagnose malaria related anemia, help support the treatment thereof, as well as relieve symptoms of severe malaria in endemic regions.

Head and neck squamous cell carcinoma (HNSCC) is the sixth most common cancer worldwide. Tobacco use is the main risk factor for HNSCC, and tobacco-associated HNSCCs have poor prognosis and response to available treatments. Recently approved anti-PD-1 immune checkpoint inhibitors showed limited activity (≤20%) in HNSCC, highlighting the need to identify new therapeutic options. For this, mouse models that accurately mimic the complexity of the HNSCC mutational landscape and tumor immune environment are urgently needed. Here, we report a mouse HNSCC model system that recapitulates the human tobacco-related HNSCC mutanome, in which tumors grow when implanted in the tongue of immunocompetent mice. These HNSCC lesions have similar immune infiltration and response rates to anti-PD-1 (≤20%) immunotherapy as human HNSCCs. Remarkably, we find that >70% of HNSCC lesions respond to intratumoral anti-CTLA-4. This syngeneic HNSCC mouse model provides a platform to accelerate the development of immunotherapeutic options for HNSCC.

Abstract Introduction Patients with COVID‐19 may present different viral loads levels. However, the relationship between viral load and disease severity in COVID‐19 is still unknown. Therefore, this study aimed to systematically review the association between SARS‐CoV‐2 viral load and COVID‐19 severity. Methods The relevant studies using the keywords of “COVID‐19” and “viral load” were searched in the databases of PubMed, Scopus, Google Scholar, and Web of Science. A two‐step title/abstract screening process was carried out and the eligible studies were included in the study. Results Thirty‐four studies were included from the initial 1015 records. The vast majority of studies have utilized real‐time reverse transcription‐polymerase chain reaction of the nasopharyngeal/respiratory swabs to report viral load. Viral loads were commonly reported either as cycle threshold ( C t ) or log 10 RNA copies/ml. Conclusion The results were inconclusive about the relationship between COVID‐19 severity and viral load, as a similar number of studies either approved or opposed this hypothesis. However, the studies denote the direct relationship between older age and higher SARS‐CoV‐2 viral load, which is a known risk factor for COVID‐19 mortality. The higher viral load in older patients may serve as a mechanism for any possible relationships between COVID‐19 viral load and disease severity. There was a positive correlation between SARS‐CoV‐2 viral load and its transmissibility. Nonetheless, further studies are recommended to precisely characterize this matter.

There have been various developments in intraoral 3D scanning technology. This study is aimed at investigating the accuracy of 10 scanners developed from 2015 to 2020. A maxillary dental model with reference points was printed from Form 2 (FormLabs, Somerville, MA, USA). The model was scanned 5 times with each intraoral scanner (IOS); Trios 3 (normal and high‐resolution mode); Trios 4 (normal and high‐resolution mode) (3Shape Trios A/S, Copenhagen, Denmark); iTero Element, iTero 2, and iTero 5D Element (Align Technologies, San Jose, California, USA); Dental Wings (Dental Wings, Montreal QC, Canada); Panda 2 (Pengtum Technologies, Shanghai, China); Medit i500 (Medit Corp. Seoul, South Korea); Planmeca Emerald™ (Planmeca, Helsinki, Finland); and Aoralscan (Shining 3D Tech. Co., Ltd., Hangzhou, China). After the scan, the 3D scanned stereolithography files were created. The various distances were measured five times in X , Y , Z , and X Y axes of various scans and with a vernier caliper (control) and from the Rhinoceros software. The data were analyzed using SPSS 18. Test for the normality of the various measurement data were done using Kolmogorov‐Smirnov test. The trueness and precision of the measurements were compared among the various scans using the Kruskal‐Wallis test. The significance was considered at P &lt; 0.05. The trueness of the intraoral scans was analyzed by comparing the measurements from the control. Precision was tested through the measurements of repeated scans. It showed that more the distance is less the accuracy for all scanners. In all studied scanners, the trueness varied but precision was favorably similar. Diagonal scanning showed less accuracy for all the scanners. Hence, when scanning the full arch, the dentist needs to take more caution and good scan pattern. Trios series showed the best scan results compared to other scanners.

In a society highly conscious of esthetics, prosthetic rehabilitation of lost teeth with tissue-integrated implants has gained wide acceptance and demand by patients and clinicians. The backbone of these tissue-integrated implants is the biotechnical process of osseointegration. Although the concept has been introduced and discussed for ages, the deepening knowledge about its cellular and molecular mechanisms has led the researchers to borrow further into the factors influencing the process of osseointegration. This has aided in the hastening and improving the process of osseointegration by exploiting several, even the minutest, details and events taking place in this natural process. Recently, due to the high esthetic expectations of the patients, the implants are being loaded immediately, which demands a high degree of implant stability. Implant stability, especially secondary stability, largely depends on bone formation and integration of implants to the osseous tissues. Various factors that influence the rate and success of osseointegration can either be categorized as those related to implant characteristics like the physical and chemical macro- and microdesign of implants or the bone characteristics like the amount and quality of bone and the local and systemic host conditions, or the time or protocol followed for the functional loading of the dental implant. To address the shortcomings in osseointegration due to any of the factors, it is mandatory that continuous and reliable monitoring of the status of osseointegration is done. This review attempts to encompass the mechanisms, factors affecting, and methods to assess osseointegration, followed by a discussion on the recent advances and future perspectives in dental implantology to enhance the process of osseointegration. The review was aimed at igniting the inquisitive minds to usher further the development of technology that enhances osseointegration.

Natural product is one of the sources of drugs in pharmaceutical industry, and one of the notable origin of natural product is the medicinal plants. Medicinal plants tend to cure some certain diseases and could be a source for potential drugs. The Department of Health of the Philippines approved 10 medicinal plants namely Allium sativum (Garlic/Bawang), Blumea balsamifera (Nagal camphor/sambong), Cassia alata (Ringworm bush/akapulko), Clinopodium douglasii (Mint/yerba Buena), Ehretia microphylla (Scorpion bush/Tsaang Gubat), Momordica charantia (Bitter Melon/Ampalaya), Peperomia pellucida (Silver bush/ulasimang Bato), Psidium guajava (Guava/Bayabas), Quisqualis indica (Rangoon creeper/niyug-niyogan), and Vitex negundo (Five-leaved Chaste Tree/lagundi). The review was conducted to show that these medicinal plants are capable in treating infections and some diseases. It was found that Allium sativum for the treatmet of wounds, hypertension and tootache; Blumea balsimifera is effective in diuretic treatment for hypertension; Cassia alata for the treatment of scabies, fungal infection, athlete’s foot, tinea flava, ringworm; Clinopodium douglasii for the treatment of muscle pain, arthritis, rheumatism, cough, headache; Ehretia microphylla for the treatment of diarrhea and stomachache; Momordica charantia for the treatment of diabetes mellitus; Peperomia pellucida for the treatment of gout and rheumatism; Psidium guajava for the treatment of wounds and diarrhea; Quisqualis indica for anti-helmintic medicine; and Vitex negundo for the treatment of cough, asthma, and fever. In conclusion, these 10 medicinal plants have natural products that can be used as source for potential drugs. However, there are still many species of ethnobotanical plants that are not yet investigated thoroughly and might be a source for potential drugs. Therefore, more investigations should be done in other species of plant, most especially for the plants with practical used.

The cementation of indirect restoration is one of the most important steps in prosthetic and restorative dentistry. Cementation aims to bond the prosthetic restoration to the prepared enamel or enamel and dentine. Successful cementation protocols prevent biofilm formation at the margin between tooth and restoration and minimize mechanical and biological complications. With the advancements in dental cements, they have been modified to be versatile in terms of handling, curing, and bond strengths. This review presents updates on dental cements, focusing on the composition, properties, advantages, limitations, and indications of the various cements available. Currently, dental restorations are made from various biomaterials, and depending on each clinical case, an appropriate luting material will be selected. There is no luting material that can be universally used. Therefore, it is important to distinguish the physical, mechanical, and biological properties of luting materials in order to identify the best options for each case. Nowadays, the most commonly used dental cements are glass-ionomer and resin cement. The type, shade, thickness of resin cement and the shade of the ceramic, all together, have a tangible influence on the final restoration color. Surface treatments of the restoration increase the microtensile bond strength. Hence, the proper surface treatment protocol of both the substrate and restoration surfaces is needed before cementation. Additionally, the manufacturer’s instructions for the thin cement-layer thickness are important for the long-term success of the restoration.