Gujarat University

In the era of nanoscience where all the devices and technologies are going to smaller and smaller in size with improved properties; catalysis is an important field of application. In this review article we are trying to summarize data reported in literature for application of nano sized catalyst in our daily life which are useful for human beings. Improvement in catalytic properties due size of catalyst reduced to nano scale is discussed here. Introductive points regarding nanoscience; their functional approaches; current research are also here. Main applications of nanocatalysts in water purification; fuel cell; energy storage; in composite solid rocket propellants; bio diesel production; in medicine; in dye; application of carbon nano tubes and several other point of application are discussed here in detail.

This review article gives information about the recent advances in the synthesis of quinoline derivatives by various eco-friendly, green and clean protocols.

Salinity is one of the major anthropogenic as well as environmental stresses that reduce plant growth. Results show that even after being adapted up to 6% sodium chloride (NaCl) concentration, all selected isolates were able to solubilize phosphate, and produce phytohormones, siderophores and 1-aminocyclopropane-1-carboxylic acid (ACC) deaminase enzyme. NT1 was found to exhibit the highest phosphate solubilization zones (25 mm), siderophore production (1000 µg ml−1) as well as ACC deaminase production (50 µMmg−1h−1) potential under laboratory conditions. On the other hand, pot studies conducted on tomato plants under 2% NaCl stress proved that C4 and T15 were the best growth promoters. C4 showed 50% enhancement in root and shoot length as compared to NaCl added untreated plants as well as in absence of NaCl. C4 also enhanced salinity tolerance in plants with the lowest uptake of NaCl thereby reducing the salt stress on plants. C5 enhanced biomass production in tomato plants with increased uptake of the salts by plants, thereby reducing the salt concentration in the soil. The study thus shows that the selected isolates can be used for the plant growth promotion of plants under salinity stress.

Adsorption can be efficiently employed for the removal of various toxic dyes from water and wastewater. In this article, the authors reviewed variety of adsorbents used by various researchers for the removal of malachite green (MG) dye from an aqueous environment. The main motto of this review article was to assemble the scattered available information of adsorbents used for the removal of MG to enlighten their wide potential. In addition to this, various optimal experimental conditions (solution pH, equilibrium contact time, amount of adsorbent and temperature) as well as adsorption isotherms, kinetics and thermodynamics data of different adsorbents towards MG were also analyzed and tabulated. Finally, it was concluded that the agricultural solid wastes and biosorbents such as biopolymers and biomass adsorbents have demonstrated outstanding adsorption capabilities for removal of MG dye.

Over the years, conventional wastewater treatment processes have achieved to some extent in treating effluents for discharge pints. Development in wastewater treatment processes is essential to make treated wastewater reusable for industrial, agricultural, and domestic purposes. Membrane technology has emerged as an ideal technology for treating wastewater from different wastewater streams. Membrane technology is one of the most up-to-date advancements discovered to be successful in fundamentally lessening impurities to desired levels. In spite of having certain impediments, membrane bioreactors (MBRs) for biological wastewater treatment provide many advantages over conventional treatment. This review article covers all the aspects of membrane technology that are widely used in wastewater treatment process such as the principle of membrane technology, the classification of membrane technology processes in accordance to pressure, concentration, electrical and thermal-driven processes, its application in different industries, advantages, disadvantages and the future prospective.

Abstract The synthesis of coumarins through Knoevenagel condensation is one of the most important processes in synthetic organic chemistry and medicinal chemistry. Compounds including a coumarin (2-oxo-2H-1-benzopyran) backbone have a wide range of application in the pharmaceutical field. Thus, many methodologies have been developed for the synthesis of this important class of compounds. However, some methods are always associated with toxic and corrosive catalysts, longer reaction time, poor yield, less purity, and by-products along with the desired product. Furthermore, some of these processes are not efficient and environmentally friendly. Therefore, mild, efficient, and environmentally friendly protocols have been developed recently by many scientists for the synthesis of coumarin derivatives via Knoevenagel condensation with good yield and purity. In this review, we have summarized various methods for the synthesis of coumarins via Knoevenagel condensation. Keywords: Coumarin derivativesefficient methodheterogeneous catalystshigh yieldionic liquidKnoevenagel condensationpiperidine ACKNOWLEDGMENTS The authors are thankful to the Department of Chemistry, Gujarat University Ahmedabad, Gujarat, India, for providing the necessary laboratory facilities. UGC-Info net and INFLIBNET Gujarat University are acknowledged for providing the e-source facilities. Notes Color versions of one or more of the figures in the article can be found online at www.tandfonline.com/lsyc.

Summary When n distinguishable directions in p dimensions are required to describe each orientation, Downs (1972) has extended the von Mises–Fisher distribution. We obtain the normalizing constant which leads to the investigation of various basic properties of the distribution. In particular, an explicit expression for the first population moment as well as the asymptotic distribution of the basic statistics are provided. The estimation problem, important testing problems, and exact sampling distributions are dealt with, and some techniques are applied to a set of vectorcardiogram data. An extension of the distribution is also proposed.

The rapidly enlarging COVID-19 pandemic caused by the novel SARS-corona virus-2 is a global public health emergency of an unprecedented level. Unfortunately no treatment therapy or vaccine is yet available to counter the SARS-CoV-2 infection, which substantiates the need to expand research efforts in this direction. The indispensable function of the main protease in virus replication makes this enzyme a promising target for inhibitors screening and drug discovery to treat novel coronavirus infection. The recently concluded α-ketoamide ligand-bound X-ray crystal structure of SARS-CoV-2 Mpro (PDB ID: 6Y2F) from Zhang et al. has revealed the potential inhibitor binding mechanism and the molecular determinants responsible for substrate binding. For the study, we have targeted the SARS-CoV-2 Mpro for the screening of FDA approved antiviral drugs and carried out molecular docking based virtual screening. Further molecular dynamic simulation studies of the top three selected drugs carried out to investigated for their binding affinity and stability in the SARS-CoV-2 Mpro active site. The phylogenetic analysis was also performed to know the relatedness between the SARS-CoV-2 genomes isolated from different countries. The phylogenetic analysis of the SARS-CoV-2 genome reveals that the virus is closely related to the Bat-SL-CoV and does not exhibit any divergence at the genomic level. Molecular docking studies revealed that among the 77 drugs, screened top ten drugs shows good binding affinities, whereas the top three drugs: Lopinavir–Ritonavir, Tipranavir, and Raltegravir were undergone for molecular dynamics simulation studies for their conformational stability in the active site of the SARS-CoV-2 Mpro protein. In the present study among the library of FDA approved antiviral drugs, the top three inhibitors Lopinavir–Ritonavir, Tipranavir, and Raltegravir show the best molecular interaction with the main protease of SARS-CoV-2. However, the in-vitro efficacy of the drug molecules screened in this study further needs to be corroborated by carrying out a biochemical and structural investigation.

Many rhizobacteria isolated from plant rhizosphere produce various phytohormones in the form of secondary metabolites, the most common of which is Indole-3-acetic acid (IAA). Here, we detail analytical protocols of IAA detection and quantification, in vitro and in situ, as recently applied to Klebsiella SGM 81, a rhizobacterium isolated from the rhizosphere of Dianthus caryophyllus (a commercially important flower across the globe). Specifically, we describe a detailed protocol for a colorimetric assay using the Salkowski reagent method, which can be used to screen for the presence of Indole compounds. To further detect and quantify IAA, a highly accurate analytical approach of LC-MS/MS is used. To detect the presence of IAA around the root system of Dianthus caryophyllus, in situ staining of plant roots is done using Salkowski reagent.

A pure ferrite and epoxy samples as well as the epoxy/ferrite composites with different 20 wt.%, 30 wt.%, 40 wt.%, and 50 wt.% weight ferrite contents have been prepared by the chemical co-precipitation method. AC-conductivity and dielectric properties such as the dielectric constant and dielectric loss of the prepared samples have been studied. The obtained results showed that the samples had a semiconductor behavior. The dielectric constant of the composites has been calculated theoretically using several models. For the composite sample that contains 20 wt.% of ferrites, these models give satisfactory compliance, while for the composite samples with a higher percentage of nanofillers, more than 30 wt.% theoretical results do not coincide with experimental data. The investigated polymer has very low conductivity, so this type of polymer can be useful for high-frequency applications, which can reduce the losses caused by eddy current. Thus, the prepared samples are promising materials for practical use as elements of microwave devices.

BACKGROUND: Normalization of hyperglycemia, hyperlipidemia, and oxidative stress is an important objective in preventing diabetes-induced cardiac dysfunction. OBJECTIVE: This study was undertaken to examine the effects of gallic acid in myocardial dysfunctions associated with type-1 diabetes. MATERIALS AND METHODS: Diabetes was induced by single intravenous injection of streptozotocin (STZ, 50 mg/kg i.v.). Gallic acid was administered daily at three different doses (100, 50, and 25 mg/kg p.o.) for 8 weeks at the end of which blood samples were collected and analyzed for various biochemical parameters. RESULTS: Injection of STZ produced significant loss of body weight (BW), polyphagia, polydypsia, hyperglycemia, hypoinsulinemia, hyperlipidemia, hypertension, bradycardia, and myocardial functional alterations. Treatment with gallic acid significantly lowered fasting glucose, the AUC(glucose) level in a dose-dependent manner; however, the insulin level was not increased significantly at same the dose and prevented loss of BW, polyphagia, and polydypsia in diabetic rats. It also prevented STZ-induced hyperlipidemia, hypertension, bradycardia, structural alterations in cardiac tissue such as increase in force of contraction, left ventricular weight to body weight ratio, collagen content, protein content, serum lactate dehydrogenase, and creatinine kinase levels in a dose-dependent manner. Further, treatment also produced reduction in lipid peroxidation and increase in antioxidant parameters in heart of diabetic rats. CONCLUSION: The results of this study suggest that gallic acid to be beneficial for the treatment of myocardial damage associated with type-1 diabetes.

The field of nanotechnology has revolutionised global attempts to prevent, treat, and eradicate infectious diseases in the foreseen future. Nanovaccines have proven to be a valuable pawn in this novel technology. Nanovaccines are made up of nanoparticles that are associated with or prepared with components that can stimulate the host's immune system. In addition to their delivery capabilities, the nanocarriers have been demonstrated to possess intrinsic adjuvant properties, working as immune cell stimulators. Thus, nanovaccines have the potential to promote rapid as well as long-lasting humoral and cellular immunity. The nanovaccines have several possible benefits, including site-specific antigen delivery, increased antigen bioavailability, and a diminished adverse effect profile. To avail these benefits, several nanoparticle-based vaccines are being developed, including virus-like particles, liposomes, polymeric nanoparticles, nanogels, lipid nanoparticles, emulsion vaccines, exomes, and inorganic nanoparticles. Inspired by their distinctive properties, researchers are working on the development of nanovaccines for a variety of applications, such as cancer immunotherapy and infectious diseases. Although a few challenges still need to be overcome, such as modulation of the nanoparticle pharmacokinetics to avoid rapid elimination from the bloodstream by the reticuloendothelial system, The future prospects of this technology are also assuring, with multiple options such as personalised vaccines, needle-free formulations, and combination nanovaccines with several promising candidates.

Recent advances in various synthetic protocols of 2-substituted benzothiazole derivatives.

Andrographis paniculata (AP) treatment prevents BHC induced increase in the activities of enzymes y-Glutamyl transpeptidase, glutathione-S-transferase and lipid peroxidation. The activities of antioxidant enzymes like superoxide dismutase, catalase, glutathione peroxidase and the levels of glutathione were decreased following BHC effect. Administration of AP showed protective effects in the activity of superoxide dismutase, catalase, glutathione peroxidase, glutathione reductase as well the level of glutathione. The activity of lipid peroxidase was also decreased. The result indicate antioxidant and hepatoprotective action of A. paniculata.

Carotenoids are the phytochemicals known for their biological activities. They are found in nature in the form of plants, algae, fungi and in microorganisms. This is the major group having two different structure one with oxygen and without oxygen. The Present article aims to present these molecules as a new therapeutic agent, as it has unrealized efficiency to prevent and reduce the symptoms of many diseases like cancer, neurodegenerative diseases such as Alzheimer, cerebral ischemia, diabetes associated with obesity and hypertension, ophthalmic diseases and many more. It can be utilized in the form of dietary supplement as nutraceutical and pharmaceutical compounds. Yet more research and developing test knowledge is needed to make it available to the humans. In this article its sources, biosynthesis, properties, applicability and commercialization of pigments from naturally produced sources are discussed.

Abstract A deterministic inventory model is developed for deteriorating items for a system that allows backlogging under the condition of immediate replenishments. The model is developed for any well-oehaved probability distribution for the time to deterioration of an item. From the model developed, the earlier models developed by Ghare and Schrader and Covert and Philip can be obtained as particular cases by taking a suitable probability distribution for the time to deterioration of an item when shortage cost becomes large.

In the last 2-3 decades, the broad research in the application of benzimidazole derivatives made it important for mankind. Many scientists have worked on benzimidazole derivatives and they found that this compound has a diverse role in the field of medicinal chemistry. Few benzimidazole derivatives are currently in the market as a drug candidate against various diseases. Moreover, the benzimidazole derivatives exhibit pharmacological activities such as anti-tuberculosis, anti-malarial, antihistamine, antimicrobial, antiviral, antidiabetic, anticancer, anti-fungal, anti-inflammatory, analgesic, anti-HIV, etc. In this review, we have summarized various derivatives of benzimidazole which have been prepared by many researchers to understand the chemistry as well as diverse pharmacological activities. These findings may lead the scientists who are working in the field of medicinal chemistry to the development of benzimidazole based drug candidates in the future.

Polymeric materials obtained from petroleum resources are nonbiodegradable. Defying degradation, they damage the environment as a result of their ending up in the landfills. Synthesized biodegradable polymeric materials (BPMs) have received increasing interest owing to the difficulty in procuring reproducibility when using natural polymeric materials. Through the modification of natural polymeric materials or materials via chemical, microbiological, enzyme-mediated, and chemo-enzymatic synthesis, a comprehensive range of variegated BPMs can be reaped. Amended natural polymeric materials such as starch, cellulose, and chitin have enhanced properties, while synthetic BPMs such as PLA, PGA, PCL, PDS, and PLGA are explicitly designed to pursue coveted applications in multifarious domains such as whole diagnostics and therapeutics. Synthesized BPMs can be embedded with tailored characteristics to justify the neoteric entails of mankind.

Abstract In view of increasing applications of electro‐conductive polymers in various fields such as electronics, smart textiles, sensors, energy storage, and medical. Researchers & Scientists from all over the world have continuously investigating the intrinsic conductive polymers (CPs) and its doping process to gain appreciable electrical conductivity suitable for particular applications. Its unique features such as superior stability, processability, workability, light weight, corrosion resistant, tailoribility, flexibility, and gaining wide range of electrical conductivity on doping drives CPs as a possible substitute for metals and semiconductors. An effort has been made to bring various aspects of CPs viz. different methods of synthesis, its applications, doping techniques, characterization techniques, and current trends of its utility. This review article clearly specifies about the different techniques available for the synthesis of CPs such as Polyacetylene, Polyaniline, Polypyrrole, Polyphenylene, Polythiophene, Polyphenyl vinylene, and Poly(3,4‐ethylenedioxythiophene) via polymerization using chemical, plasma, electro‐chemical, photo‐chemical, metathesis methods, and so on, and their electrical conductivity values achieved with and without dopants.

Phytoremediation i.e. the use of plants to adsorb, accumulate or detoxify contaminants is an emerging area of interest. A viable technology needs optimum biomass production in metal contaminated soil. Five strains of microbes were selected after testing their potential as plant growth promoters, on the basis of their phosphate solubilization ability, IAA, siderophore and HCN production and biocontrol potentials. They were examined for growth in synthetic medium supplemented with nickel and their MIC (2 mM) was determined. These isolates were also able to grow and produce siderophores in presence of heavy metals like Ni, Zn and Cd. A positive response of bacterial inoculants was observed in chickpea plants towards toxic effect of nickel present in soil at different concentration (0, 1 and 2 mM). Bacterial inoculants enhanced fresh and dry weight of plants even at 2 mM nickel concentration. Pot experiments indicated that presence of nickel at upto 1 mM enhanced plant growth compared to uninoculated nickel free plants. The accumulation of nickel/plant was just 50% in Pseudomonas inoculated plants as compared to uninoculated plants with 2 mM nickel concentration along with increased biomass. The results suggest the use of these PGPR to enhance plant growth in nickel-spiked land and remediate nickel from contaminated sites.