Munich University of Applied Sciences

Gaia is a cornerstone mission in the science programme of the EuropeanSpace Agency (ESA). The spacecraft construction was approved in 2006, following a study in which the original interferometric concept was changed to a direct-imaging approach. Both the spacecraft and the payload were built by European industry. The involvement of the scientific community focusses on data processing for which the international Gaia Data Processing and Analysis Consortium (DPAC) was selected in 2007. Gaia was launched on 19 December 2013 and arrived at its operating point, the second Lagrange point of the Sun-Earth-Moon system, a few weeks later. The commissioning of the spacecraft and payload was completed on 19 July 2014. The nominal five-year mission started with four weeks of special, ecliptic-pole scanning and subsequently transferred into full-sky scanning mode. We recall the scientific goals of Gaia and give a description of the as-built spacecraft that is currently (mid-2016) being operated to achieve these goals. We pay special attention to the payload module, the performance of which is closely related to the scientific performance of the mission. We provide a summary of the commissioning activities and findings, followed by a description of the routine operational mode. We summarise scientific performance estimates on the basis of in-orbit operations. Several intermediate Gaia data releases are planned and the data can be retrieved from the Gaia Archive, which is available through the Gaia home page.

Context. At about 1000 days after the launch of Gaia we present the first Gaia data release, Gaia DR1, consisting of astrometry and photometry for over 1 billion sources brighter than magnitude 20.7.
\n
\nAims. A summary of Gaia DR1 is presented along with illustrations of the scientific quality of the data, followed by a discussion of the limitations due to the preliminary nature of this release.
\n
\nMethods. The raw data collected by Gaia during the first 14 months of the mission have been processed by the Gaia Data Processing and Analysis Consortium (DPAC) and turned into an astrometric and photometric catalogue.
\n
\nResults. Gaia DR1 consists of three components: a primary astrometric data set which contains the positions, parallaxes, and mean proper motions for about 2 million of the brightest stars in common with the Hipparcos and Tycho-2 catalogues – a realisation of the Tycho-Gaia Astrometric Solution (TGAS) – and a secondary astrometric data set containing the positions for an additional 1.1 billion sources. The second component is the photometric data set, consisting of mean G-band magnitudes for all sources. The G-band light curves and the characteristics of ~3000 Cepheid and RR Lyrae stars, observed at high cadence around the south ecliptic pole, form the third component. For the primary astrometric data set the typical uncertainty is about 0.3 mas for the positions and parallaxes, and about 1 mas yr-1 for the proper motions. A systematic component of ~0.3 mas should be added to the parallax uncertainties. For the subset of ~94 000 Hipparcos stars in the primary data set, the proper motions are much more precise at about 0.06 mas yr-1. For the secondary astrometric data set, the typical uncertainty of the positions is ~10 mas. The median uncertainties on the mean G-band magnitudes range from the mmag level to ~0.03 mag over the magnitude range 5 to 20.7.
\n
\nConclusions. Gaia DR1 is an important milestone ahead of the next Gaia data release, which will feature five-parameter astrometry for all sources. Extensive validation shows that Gaia DR1 represents a major advance in the mapping of the heavens and the availability of basic stellar data that underpin observational astrophysics. Nevertheless, the very preliminary nature of this first Gaia data release does lead to a number of important limitations to the data quality which should be carefully considered before drawing conclusions from the data.

Plate tectonic processes introduce basaltic crust (as eclogite) into the peridotitic mantle. The proportions of these two sources in mantle melts are poorly understood. Silica-rich melts formed from eclogite react with peridotite, converting it to olivine-free pyroxenite. Partial melts of this hybrid pyroxenite are higher in nickel and silicon but poorer in manganese, calcium, and magnesium than melts of peridotite. Olivine phenocrysts' compositions record these differences and were used to quantify the contributions of pyroxenite-derived melts in mid-ocean ridge basalts (10 to 30%), ocean island and continental basalts (many >60%), and komatiites (20 to 30%). These results imply involvement of 2 to 20% (up to 28%) of recycled crust in mantle melting.

Martin Beyer received his diploma in physics in 1996 and a Ph.D. in physical chemistry in 1999 from TU Munich. With a Feodor Lynen fellowship from the Alexander von Humboldt foundation, he conducted postdoctoral research at UC Berkeley. In 2003, he received the Heinz Maier Leibnitz award jointly given by the Deutsche Forschungsgemeinschaft and the Bundesministerium für Bildung und Forschung. He finished his habilitation in 2004 and obtained the venia legendi in physical chemistry from TU Munich in the same year. Martin Beyer's research focuses on gas-phase ion chemistry of molecular and metal clusters, computational chemistry, and fundamental concepts in mechanochemistry.\n\t\n\t\tHauke Clausen-Schaumann studied physics at the Technical University of Munich. In 1995, he joined the group of Prof. Hermann Gaub, for his diploma research about the adsorption of DNA to nano-structured cationic lipid membranes. In 1996, he moved to the Ludwig Maximilians University in Munich, where he started his Ph.D. research in the area of single-molecule force spectroscopy. During this time, he also served as scientific coordinator of the national competence center for nanoanalytics. In 2000, he obtained his Ph.D. from the Ludwig Maximilians University, for his work on DNA mechanics. After several years as a scientist and R&D manager for private companies and public research organizations, he joined the Munich University for Applied Sciences as a Professor for nanobiotechnology, in October 2004. His research interests concern the mechanical properties of biomolecules and chemical bonds, the development of force-based biochip technologies, as well as biomembranes and single-enzyme activity.\n\n\n\t 

Data from the Global Oscillation Network Group (GONG) project and other helioseismic experiments provide a test for models of stellar interiors and for the thermodynamic and radiative properties, on which the models depend, of matter under the extreme conditions found in the sun. Current models are in agreement with the helioseismic inferences, which suggests, for example, that the disagreement between the predicted and observed fluxes of neutrinos from the sun is not caused by errors in the models. However, the GONG data reveal subtle errors in the models, such as an excess in sound speed just beneath the convection zone. These discrepancies indicate effects that have so far not been correctly accounted for; for example, it is plausible that the sound-speed differences reflect weak mixing in stellar interiors, of potential importance to the overall evolution of stars and ultimately to estimates of the age of the galaxy based on stellar evolution calculations.

The neurodegeneration observed in Alzheimer's disease has been associated with synaptic dismantling and progressive decrease in neuronal activity. We tested this hypothesis in vivo by using two-photon Ca2+ imaging in a mouse model of Alzheimer's disease. Although a decrease in neuronal activity was seen in 29% of layer 2/3 cortical neurons, 21% of neurons displayed an unexpected increase in the frequency of spontaneous Ca2+ transients. These "hyperactive" neurons were found exclusively near the plaques of amyloid beta-depositing mice. The hyperactivity appeared to be due to a relative decrease in synaptic inhibition. Thus, we suggest that a redistribution of synaptic drive between silent and hyperactive neurons, rather than an overall decrease in synaptic activity, provides a mechanism for the disturbed cortical function in Alzheimer's disease.

The recent progress in ferroelectricity and antiferroelectricity in HfO2-based thin films is reported. Most ferroelectric thin film research focuses on perovskite structure materials, such as Pb(Zr,Ti)O3, BaTiO3, and SrBi2Ta2O9, which are considered to be feasible candidate materials for non-volatile semiconductor memory devices. However, these conventional ferroelectrics suffer from various problems including poor Si-compatibility, environmental issues related to Pb, large physical thickness, low resistance to hydrogen, and small bandgap. In 2011, ferroelectricity in Si-doped HfO2 thin films was first reported. Various dopants, such as Si, Zr, Al, Y, Gd, Sr, and La can induce ferro-electricity or antiferroelectricity in thin HfO2 films. They have large remanent polarization of up to 45 μC cm(-2), and their coercive field (≈1-2 MV cm(-1)) is larger than conventional ferroelectric films by approximately one order of magnitude. Furthermore, they can be extremely thin (<10 nm) and have a large bandgap (>5 eV). These differences are believed to overcome the barriers of conventional ferroelectrics in memory applications, including ferroelectric field-effect-transistors and three-dimensional capacitors. Moreover, the coupling of electric and thermal properties of the antiferroelectric thin films is expected to be useful for various applications, including energy harvesting/storage, solid-state-cooling, and infrared sensors.

The purple membrane of Halobacterium halobium contains only one protein, bacteriorhodopsin, which closely resembles the visual pigments of animals. Light flashes cause a rapid transient shift of its absorption maximum from 560 to 415 nm. This shift is accompanied by release and uptake of protons. Respiring cells acidify the medium in the dark; if they contain purple membrane their O(2) consumption is reduced in the light. Starved or anaerobic cells containing purple membrane, in the absence of any apparent source of energy, generate and maintain a proton gradient across the cell membrane as long as they are exposed to light. We postulate that the light-generated proton gradient arises from a vectorial release and uptake of protons by bacteriorhodopsin, which is suitably oriented in the cell membrane and under continuous illumination oscillates rapidly between the long- and short-wavelength form. Preliminary results indicate that the gradient in H. halobium plays the central role in energy coupling attributed to such electrochemical gradients by Mitchell's chemiosmotic theory.

Electrical conductivity measurements were performed with thin (50 μ) single crystals of p-terphenyl, p-quaterphenyl, and anthracene supplied with aqueous electrodes, one of which was an iodine-iodide solution (acceptor electrode), and the other an iodide solution. The results strongly indicate that the acceptor electrode can form ohmic contact for hole injection into these crystals and that space-charge-limited currents can be drawn through them. The crystals were found to contain hole-trapping states the location-in-energy of which can be approximated by a decreasing exponential distribution above the valence band. The measurements showed that the hole mobility in p-terphenyl is about 3×10−2 cm2/v sec, is independent of the field at least up to about 4×104 v/cm, and that the hole-trap concentration is at least 1013 cm−3. The acceptor electrode used does not form ohmic contact to crystals of naphthalene and diphenyl; an explanation for this is proposed. Some theoretical aspects of ohmic contact formation to organic crystals and space-charge-limited current flow in insulators are also discussed.

Abstract Di‐ und Tripyrrylmethene bilden mit Bortrifluorid in Gegenwart von tert. Basen stabile, gelbe bis rote Difluorboryl‐Komplexe 1–9 , die bei Anwesenheit negativer Substituenten Alkalisalze ( z. B. 12–14) bilden können. Alle Dipyrrylmethen/Bor‐Komplexe sind durch intensive Fluoreszenz ausgezeichnet. Ebenso wie die Salzbildung ist der Verlauf der katalytischen Hydrierung (3 → 16, 7 → 17) von der Substitution der Pyrrol‐Kerne abhängig. – Auch Aluminium bildet stark fluoreszierende Komplexe mit Dipyrrylmethenen, die aber wegen ihrer extremen Wasserempfindlichkeit noch nicht näher untersucht wurden. – Das Tripyrrylmethen 11 wurde durch Reaktion eines Pyrrol‐Derivates mit Oxalylchlorid erhalten.

The structural, thermal, and dielectric properties of the ferroelectric phase of HfO2, ZrO2, and Hf0.5Zr0.5O2 (HZO) are investigated with carefully validated density functional computations. We find that the free bulk energy of the ferroelectric orthorhombic Pca21 phase is unfavorable compared to the monoclinic P21/c and the orthorhombic Pbca phase for all investigated stoichiometries in the Hf1−xZrxO2 system. To explain the existence of the ferroelectric phase in nanoscale thin films, we explore the Gibbs/Helmholtz free energies as a function of stress and film strain and find them unlikely to become minimal in HZO films for technological relevant conditions. To assess the contribution of surface energy to the phase stability, we parameterize a model, interpolating between existing data, and find the Helmholtz free energy of ferroelectric grains minimal for a range of size and stoichiometry. From the model, we predict undoped HfO2 to be ferroelectric for a grain size of about 4 nm and epitaxial HZO below 5 nm. Furthermore, we calculate the strength of an applied electric field necessary to cause the antiferroelectric phase transformation in ZrO2 from the P42/nmc phase as 1 MV/cm in agreement with experimental data, explaining the mechanism of field induced phase transformation.

This article presents an overview of interest research and describes the theoretical and methodological background for the assessment of interest in science in large‐scale assessments like the ‘Programme for International Student Assessment’ (PISA). The paper starts with a short retrospective on the history of interest, bringing out theoretical roots that help to understand recent discussions on interest in science education. As interest is a widely used concept with manifold facets, it is essential to discuss different ways of modelling the relationship between a person and a comprehensive object like science with all of its different aspects, including wide ranges of content as well as contexts. Models that can be used for describing the content structure of science interest and the process of interest development are presented. Based on an overview of typical methods for assessing interests, exemplary findings on students’ interest in science are presented, which play an important role in the current scientific debate. Finally, challenges for future research on interest in science education are discussed.

Comparison of recent psychoacoustic data on consonance with those on roughness reveals that “psychoacoustic consonance” merely corresponds to the absence of roughness and is only slightly and indirectly correlated with musical intervals. Thus, psychoacoustic consonance cannot be considered as the basis of the sense of musical intervals. The basis of that sense seems to be provided by the concept of virtual pitch. This concept is introduced with a model. The concept accounts for many psychoacoustic and musical phenomena as, e.g., the ambiguity of pitch of complex tones, the “residue,” the pitch of inharmonic signals, the dominance of certain harmonics, pitch shifts, the sense for musical intervals, octave periodicity, octave enlargement, “stretching” of musical scales, and the “tonal meaning” of chords in music.

This paper reviews current knowledge on the role of the long-chain polyunsaturated fatty acids (LC-PUFA), docosahexaenoic acid (DHA, C22:6n-3) and arachidonic acid (AA, 20:4n-6), in maternal and term infant nutrition as well as infant development. Consensus recommendations and practice guidelines for health-care providers supported by the World Association of Perinatal Medicine, the Early Nutrition Academy, and the Child Health Foundation are provided. The fetus and neonate should receive LC-PUFA in amounts sufficient to support optimal visual and cognitive development. Moreover, the consumption of oils rich in n-3 LC-PUFA during pregnancy reduces the risk for early premature birth. Pregnant and lactating women should aim to achieve an average daily intake of at least 200 mg DHA. For healthy term infants, we recommend and fully endorse breastfeeding, which supplies preformed LC-PUFA, as the preferred method of feeding. When breastfeeding is not possible, we recommend use of an infant formula providing DHA at levels between 0.2 and 0.5 weight percent of total fat, and with the minimum amount of AA equivalent to the contents of DHA. Dietary LC-PUFA supply should continue after the first six months of life, but currently there is not sufficient information for quantitative recommendations.

We discuss numerical modeling attacks on several proposed strong physical unclonable functions (PUFs). Given a set of challenge-response pairs (CRPs) of a Strong PUF, the goal of our attacks is to construct a computer algorithm which behaves indistinguishably from the original PUF on almost all CRPs. If successful, this algorithm can subsequently impersonate the Strong PUF, and can be cloned and distributed arbitrarily. It breaks the security of any applications that rest on the Strong PUF's unpredictability and physical unclonability. Our method is less relevant for other PUF types such as Weak PUFs. The Strong PUFs that we could attack successfully include standard Arbiter PUFs of essentially arbitrary sizes, and XOR Arbiter PUFs, Lightweight Secure PUFs, and Feed-Forward Arbiter PUFs up to certain sizes and complexities. We also investigate the hardness of certain Ring Oscillator PUF architectures in typical Strong PUF applications. Our attacks are based upon various machine learning techniques, including a specially tailored variant of logistic regression and evolution strategies. Our results are mostly obtained on CRPs from numerical simulations that use established digital models of the respective PUFs. For a subset of the considered PUFs-namely standard Arbiter PUFs and XOR Arbiter PUFs-we also lead proofs of concept on silicon data from both FPGAs and ASICs. Over four million silicon CRPs are used in this process. The performance on silicon CRPs is very close to simulated CRPs, confirming a conjecture from earlier versions of this work. Our findings lead to new design requirements for secure electrical Strong PUFs, and will be useful to PUF designers and attackers alike.

Abstract In the presence of cyanide ions as catalyst, aromatic and heterocyclic aldehydes can be smoothly added to α,β‐unsaturated ketones, esters, and nitriles in aprotic solvents to form γ‐diketones, 4‐oxo carboxylic esters, and 4‐oxo nitriles. Thiazolium salts in the presence of bases are also suitable catalysts; they permit not only addition of aromatic and heterocyclic aldehydes but also the addition of aliphatic aldehydes.

Abstract Integrins, a diverse class of heterodimeric cell surface receptors, are key regulators of cell structure and behaviour, affecting cell morphology, proliferation, survival and differentiation. Consequently, mutations in specific integrins, or their deregulated expression, are associated with a variety of diseases. In the last decades, many integrin-specific ligands have been developed and used for modulation of integrin function in medical as well as biophysical studies. The IC 50 -values reported for these ligands strongly vary and are measured using different cell-based and cell-free systems. A systematic comparison of these values is of high importance for selecting the optimal ligands for given applications. In this study, we evaluate a wide range of ligands for their binding affinity towards the RGD-binding integrins αvβ3, αvβ5, αvβ6, αvβ8, α5β1, αIIbβ3, using homogenous ELISA-like solid phase binding assay.

Rheumatic diseases are among the oldest diseases recognized. The classification of rheumatic diseases is sometimes difficult due to unknown aetiology and heterogeneity in their clinical presentation. Osteoarthritis (OA) and rheumatoid arthritis (RA) are the two most common rheumatic diseases, accounting for a large percentage of disability worldwide. The economic and social burden of these diseases is great. Their impact on both individuals and society results from a decreased quality of life, lost productivity and increased costs of health care. Without appropriate approaches to patient management and control of these diseases, this impact can be expected to increase as the population ages. One of the challenges in studying OA and RA, and rheumatic diseases in general, is deriving epidemiological data that can be used to understand better the factors that contribute to the initiation and progression of these diseases. Only with such an understanding can significant progress be made in the diagnosis, treatment and management of patients.

The hemodynamics of heart valve prostheses can be reproducibly investigated in vitro within circulatory mock loops. By measuring the downstream velocity and shear stress fields the shear stresses which are clinically responsible for damage to platelets and red blood cells can be determined. The mechanisms of damage and the effects of shear stresses on blood corpuscles were investigated by Wurzinger et al. at the Aerodynamics Institute of the RWTH Aachen. In the present study, the above data are incorporated into a mathematical correlation, which serves as a basic model for the estimation of blood damage. This mathematical model was applied to in vitro investigations of 25 different aortic valve prostheses. The results were compared to clinical findings. In most cases agreement was good, indicating that this model may be directly applied to the clinical situation. This new method facilitates the estimation of clinically expected blood damage from in vitro measurements. It may be useful for the development and evaluation of new valve prostheses. By comparative evaluation of different valve types it also provides additional information to help the implanting surgeon select the optimum valve for his patient.

The ferroelectric properties and crystal structure of doped HfO2 thin films were investigated for different thicknesses, electrode materials, and annealing conditions. Metal-ferroelectric-metal capacitors containing Gd:HfO2 showed no reduction of the polarization within the studied thickness range, in contrast to hafnia films with other dopants. A qualitative model describing the influence of basic process parameters on the crystal structure of HfO2 was proposed. The influence of different structural parameters on the field cycling behavior was examined. This revealed the wake-up effect in doped HfO2 to be dominated by interface induced effects, rather than a field induced phase transition. TaN electrodes were shown to considerably enhance the stabilization of the ferroelectric phase in HfO2 compared to TiN electrodes, yielding a Pr of up to 35 μC/cm2. This effect was attributed to the interface oxidation of the electrodes during annealing, resulting in a different density of oxygen vacancies in the Gd:HfO2 films. Ab initio simulations confirmed the influence of oxygen vacancies on the phase stability of ferroelectric HfO2.