Yangzhou University

autophagic responses. Here, we critically discuss current methods of assessing autophagy and the information they can, or cannot, provide. Our ultimate goal is to encourage intellectual and technical innovation in the field.

Plant traits-the morphological, anatomical, physiological, biochemical and phenological characteristics of plants-determine how plants respond to environmental factors, affect other trophic levels, and influence ecosystem properties and their benefits and detriments to people. Plant trait data thus represent the basis for a vast area of research spanning from evolutionary biology, community and functional ecology, to biodiversity conservation, ecosystem and landscape management, restoration, biogeography and earth system modelling. Since its foundation in 2007, the TRY database of plant traits has grown continuously. It now provides unprecedented data coverage under an open access data policy and is the main plant trait database used by the research community worldwide. Increasingly, the TRY database also supports new frontiers of trait-based plant research, including the identification of data gaps and the subsequent mobilization or measurement of new data. To support this development, in this article we evaluate the extent of the trait data compiled in TRY and analyse emerging patterns of data coverage and representativeness. Best species coverage is achieved for categorical traits-almost complete coverage for 'plant growth form'. However, most traits relevant for ecology and vegetation modelling are characterized by continuous intraspecific variation and trait-environmental relationships. These traits have to be measured on individual plants in their respective environment. Despite unprecedented data coverage, we observe a humbling lack of completeness and representativeness of these continuous traits in many aspects. We, therefore, conclude that reducing data gaps and biases in the TRY database remains a key challenge and requires a coordinated approach to data mobilization and trait measurements. This can only be achieved in collaboration with other initiatives.

Oxygen reduction reaction (ORR), oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) are three key reactions for the development of green and sustainable energy systems. Efficient electrocatalysts for these reactions are highly desired to lower their overpotentials and promote practical applications of related energy devices. Metal-organic frameworks (MOFs) have recently emerged as precursors to fabricate carbon-based electrocatalysts with high electrical conductivity and uniformly distributed active sites. In this review, the current progress of MOF-derived carbon-based materials for ORR/OER/HER electrocatalysis is presented. Materials design strategies of MOF-derived carbon-based materials are firstly summarized to show the rich possibilities of the morphology and composition of MOF-derived carbon-based materials. A wide range of applications based on these materials for ORR, OER, HER and multifunctional electrocatalysis are discussed, with an emphasis on the required features of MOF-derived carbon-based materials for the electrocatalysis of corresponding reactions. Finally, perspectives on the development of MOF-derived carbon-based materials for ORR, OER and HER electrocatalysis are provided.

Tribolium castaneum is a member of the most species-rich eukaryotic order, a powerful model organism for the study of generalized insect development, and an important pest of stored agricultural products. We describe its genome sequence here. This omnivorous beetle has evolved the ability to interact with a diverse chemical environment, as shown by large expansions in odorant and gustatory receptors, as well as P450 and other detoxification enzymes. Development in Tribolium is more representative of other insects than is Drosophila, a fact reflected in gene content and function. For example, Tribolium has retained more ancestral genes involved in cell–cell communication than Drosophila, some being expressed in the growth zone crucial for axial elongation in short-germ development. Systemic RNA interference in T. castaneum functions differently from that in Caenorhabditis elegans, but nevertheless offers similar power for the elucidation of gene function and identification of targets for selective insect control. The red flour beetle Tribolium castaneum is a common pest: a type of 'bran bug', it targets cereal products, including grain, flour and rice bran. It is also a commonly used laboratory model, combining the ease of systematic RNA interference experiments such as those used with the nematode worm C. elegans with a biology that is more representative of most insects than even Drosophila. This weeks sees the publication by the Tribolium Genome Sequencing Consortium of the genomic sequence of T. castaneum. This is the first beetle genome to be published, and it will be a valuable resource for insect development studies and pest biology. The beetle Tribolium castaneum is a commonly used laboratory model, combining the ease of systematic RNAi experiments like those in Caenorhabditis elegans, with biology that is more representative of most insects than Drosophila melanogaster. A large consortium has sequenced and analysed the genome of the red flour beetle, creating a resource for biologists everywhere.

Metal-organic frameworks (MOFs) are a class of distinctive porous crystalline materials constructed by metal ions/clusters and organic linkers. Owing to their structural diversity, functional adjustability, and high surface area, different types of MOF-based single metal sites are well exploited, including coordinately unsaturated metal sites from metal nodes and metallolinkers, as well as active metal species immobilized to MOFs. Furthermore, controllable thermal transformation of MOFs can upgrade them to nanomaterials functionalized with active single-atom catalysts (SACs). These unique features of MOFs and their derivatives enable them to serve as a highly versatile platform for catalysis, which has actually been becoming a rapidly developing interdisciplinary research area. In this review, we overview the recent developments of catalysis at single metal sites in MOF-based materials with emphasis on their structures and applications for thermocatalysis, electrocatalysis, and photocatalysis. We also compare the results and summarize the major insights gained from the works in this review, providing the challenges and prospects in this emerging field.

Nanomaterials with intrinsic enzyme-like activities (nanozymes), have been widely used as artificial enzymes in biomedicine. However, how to control their in vivo performance in a target cell is still challenging. Here we report a strategy to coordinate nanozymes to target tumor cells and selectively perform their activity to destruct tumors. We develop a nanozyme using nitrogen-doped porous carbon nanospheres which possess four enzyme-like activities (oxidase, peroxidase, catalase and superoxide dismutase) responsible for reactive oxygen species regulation. We then introduce ferritin to guide nitrogen-doped porous carbon nanospheres into lysosomes and boost reactive oxygen species generation in a tumor-specific manner, resulting in significant tumor regression in human tumor xenograft mice models. Together, our study provides evidence that nitrogen-doped porous carbon nanospheres are powerful nanozymes capable of regulating intracellular reactive oxygen species, and ferritinylation is a promising strategy to render nanozymes to target tumor cells for in vivo tumor catalytic therapy.

Oomycetes form a deep lineage of eukaryotic organisms that includes a large number of plant pathogens which threaten natural and managed ecosystems. We undertook a survey to query the community for their ranking of plant-pathogenic oomycete species based on scientific and economic importance. In total, we received 263 votes from 62 scientists in 15 countries for a total of 33 species. The Top 10 species and their ranking are: (1) Phytophthora infestans; (2, tied) Hyaloperonospora arabidopsidis; (2, tied) Phytophthora ramorum; (4) Phytophthora sojae; (5) Phytophthora capsici; (6) Plasmopara viticola; (7) Phytophthora cinnamomi; (8, tied) Phytophthora parasitica; (8, tied) Pythium ultimum; and (10) Albugo candida. This article provides an introduction to these 10 taxa and a snapshot of current research. We hope that the list will serve as a benchmark for future trends in oomycete research.

Designing atomically dispersed metal catalysts for oxygen reduction reaction (ORR) is a promising approach to achieve efficient energy conversion. Herein, we develop a template-assisted method to synthesize a series of single metal atoms anchored on porous N,S-codoped carbon (NSC) matrix as highly efficient ORR catalysts to investigate the correlation between the structure and their catalytic performance. The structure analysis indicates that an identical synthesis method results in distinguished structural differences between Fe-centered single-atom catalyst (Fe-SAs/NSC) and Co-centered/Ni-centered single-atom catalysts (Co-SAs/NSC and Ni-SAs/NSC) because of the different trends of each metal ion in forming a complex with the N,S-containing precursor during the initial synthesis process. The Fe-SAs/NSC mainly consists of a well-dispersed FeN4S2 center site where S atoms form bonds with the N atoms. The S atoms in Co-SAs/NSC and Ni-SAs/NSC, on the other hand, form metal–S bonds, resulting in CoN3S1 and NiN3S1 center sites. Density functional theory (DFT) reveals that the FeN4S2 center site is more active than the CoN3S1 and NiN3S1 sites, due to the higher charge density, lower energy barriers of the intermediates, and products involved. The experimental results indicate that all three single-atom catalysts could contribute high ORR electrochemical performances, while Fe-SAs/NSC exhibits the highest of all, which is even better than commercial Pt/C. Furthermore, Fe-SAs/NSC also displays high methanol tolerance as compared to commercial Pt/C and high stability up to 5000 cycles. This work provides insights into the rational design of the definitive structure of single-atom catalysts with tunable electrocatalytic activities for efficient energy conversion.

Transition‐metal (Fe, Co, Ni) based metal‐organic framework materials with controllable structures, large surface areas and adjustable pore sizes have attracted wide research interest for use in next‐generation electrochemical energy‐storage devices. This review introduces the synthesis of transition‐metal (Fe, Co, Ni) based metal‐organic frameworks and their derivatives with the focus on their application in supercapacitors and batteries.

As a new class of crystalline porous materials, metal-organic frameworks (MOFs) have received great attention owing to their unique advantages of ultrahigh surface area, large pore volume and versatile applications. Developing different strategies to control the morphology and size of MOFs is very important for their practical applications. Recently, micro/nanosized MOFs have been regarded as promising candidates for electrode materials with excellent performances, which not only bridge the gap between fundamental MOF science and forward-looking applications, but also provide an opportunity to make clear the relationship between morphologies and properties. This review focuses on the design and fabrication of one-, two- and three-dimensional MOFs at micro/nanoscale, and their direct applications in batteries, supercapacitors and electrocatalysis. A discussion on challenges and future prospects of the synthesis and electrochemical applications of micro/nanoscaled MOF materials is presented.

Nitrogen is a fundamental constituent for all living creatures on the Earth and modern industrial society. The current nitrogen industry is largely powered by fossil fuels with huge energy consumption and carbon dioxide emission, and nitrogen pollution in surface water bodies induced by the indiscriminate discharge of industrial and domestic wastewater has become a worldwide environmental concern. Electrochemical techniques for nitrogen fixation and transformation under mild conditions are promising approaches to meet the challenge of efficiently managing and balancing the nitrogen cycle, where the rational design of advanced electrocatalysts from both structural and compositional aspects down to the nanoscale plays the most essential role. Herein, important nitrogen species including dinitrogen (N2), ammonia (NH3) and hydrazine (N2H4), their transformation processes between each other including the nitrogen reduction reaction (NRR), ammonia oxidation reaction (AOR) and hydrazine oxidation reaction (HzOR), and research progress on the development of related electrocatalysts are systematically summarized, aiming at establishing a general picture of the whole nitrogen cycle instead of a certain single reaction. Strategies combining theoretical computations and experimental optimizations are proposed to improve the catalytic performance including activity, efficiency, selectivity and stability, finally contributing to a self-sufficient and carbon-free "green" nitrogen economy.

Abstract Transition metal sulfides, as an important class of inorganics, can be used as excellent electrode materials for various types of electrochemical energy storage, such as lithium‐ion batteries, sodium‐ion batteries, supercapacitors, and others. Recent works have identified that mixing graphene or graphene derivatives with transition metal sulfides can result in novel composites with better electrochemical performance. This review summarizes the latest advances in transition metal sulfide composites with graphene or graphene derivatives. The synthetic strategies and morphologies of these composites are introduced. The authors then discuss their applications in lithium‐ion batteries, sodium‐ion batteries, and supercapacitors. Finally, the authors give their personal viewpoints about the challenges and opportunities for the future development about this direction.

Single-atom catalysts (SACs), as homogeneous catalysts, have been widely explored for chemical catalysis. However, few studies focus on the applications of SACs in enzymatic catalysis. Herein, we report that a zinc-based zeolitic-imidazolate-framework (ZIF-8)-derived carbon nanomaterial containing atomically dispersed zinc atoms can serve as a highly efficient single-atom peroxidase mimic. To reveal its structure-activity relationship, the structural evolution of the single-atom nanozyme (SAzyme) was systematically investigated. Furthermore, the coordinatively unsaturated active zinc sites and catalytic mechanism of the SAzyme are disclosed using density functional theory (DFT) calculations. The SAzyme, with high therapeutic effect and biosafety, shows great promises for wound antibacterial applications.

The age of big data is now coming. But the traditional data analytics may not be able to handle such large quantities of data. The question that arises now is, how to develop a high performance platform to efficiently analyze big data and how to design an appropriate mining algorithm to find the useful things from big data. To deeply discuss this issue, this paper begins with a brief introduction to data analytics, followed by the discussions of big data analytics. Some important open issues and further research directions will also be presented for the next step of big data analytics.

Lodging-resistant rice (Oryza sativa) cultivars usually show slow grain filling when nitrogen is applied in large amounts. This study investigated the possibility that a hormonal change may mediate the effect of water deficit that enhances whole plant senescence and speeds up grain filling. Two rice cultivars showing high lodging resistance and slow grain filling were field grown and applied with either normal or high amount nitrogen (HN) at heading. Well-watered and water-stressed (WS) treatments were imposed 9 days post anthesis to maturity. Results showed that WS increased partitioning of fixed (14)CO(2) into grains, accelerated the grain filling rate but shortened the grain filling period, whereas the HN did the opposite way. Cytokinin (zeatin + zeatin riboside) and indole-3-acetic acid contents in the grains transiently increased at early filling stage and WS treatments hastened their declines at the late grain filling stage. Gibberellins (GAs; GA(1) + GA(4)) in the grains were also high at early grain filling but HN enhanced, whereas WS substantially reduced, its accumulation. Opposite to GAs, abscisic acid (ABA) in the grains was low at early grain filling but WS remarkably enhanced its accumulation. The peak values of ABA were significantly correlated with the maximum grain filling rates (r = 0.92**, P < 0.01) and the partitioning of fixed (14)C into grains (r = 0.95**, P < 0.01). Exogenously applied ABA on pot-grown HN rice showed similar results as those by WS. Results suggest that an altered hormonal balance in rice grains by water stress during grain filling, especially a decrease in GAs and an increase in ABA, enhances the remobilization of prestored carbon to the grains and accelerates the grain filling rate.

Fruits produce a range of volatile compounds that make up their characteristic aromas and contribute to their flavor. Fruit volatile compounds are mainly comprised of esters, alcohols, aldehydes, ketones, lactones, terpenoids and apocarotenoids. Many factors affect volatile composition, including the genetic makeup, degree of maturity, environmental conditions, postharvest handling and storage. There are several pathways involved in volatile biosynthesis starting from lipids, amino acids, terpenoids and carotenoids. Once the basic skeletons are produced via these pathways, the diversity of volatiles is achieved via additional modification reactions such as acylation, methylation, oxidation/reduction and cyclic ring closure. In this paper, we review the composition of fruit aroma, the characteristic aroma compounds of several representative fruits, the factors affecting aroma volatile, and the biosynthetic pathways of volatile aroma compounds. We anticipate that this review would provide some critical information for profound research on fruit aroma components and their manipulation during development and storage.

Pigs have substantial potential as biomedical models for studying human developmental processes, congenital diseases, and pathogen response mechanisms in addition to utility as xenotransplant organ donors and tools for vaccine and drug design. The similarity of pigs to humans in anatomical size and structure, physiology, immunology, and genome enhances their potential as models for humans. Hence, it is imperative that research is relevant and reproducible in animal models that more closely resemble humans, such as the pig. This review summarizes the current status of pigs as an investigative model for humans and highlights their future applications.

This review addresses important issues of porcine reproductive and respiratory syndrome virus (PRRSV) infection, immunity, pathogenesis, and control. Worldwide, PRRS is the most economically important infectious disease of pigs. We highlight the latest information on viral genome structure, pathogenic mechanisms, and host immunity, with a special focus on immune factors that modulate PRRSV infections during the acute and chronic/persistent disease phases. We address genetic control of host resistance and probe effects of PRRSV infection on reproductive traits. A major goal is to identify cellular/viral targets and pathways for designing more effective vaccines and therapeutics. Based on progress in viral reverse genetics, host transcriptomics and genomics, and vaccinology and adjuvant technologies, we have identified new areas for PRRS control and prevention. Finally, we highlight the gaps in our knowledge base and the need for advanced molecular and immune tools to stimulate PRRS research and field applications.

Summary Monocarpic plants require the initiation of whole‐plant senescence to remobilize and transfer assimilates pre‐stored in vegetative tissues to grains. Delayed whole‐plant senescence caused by either heavy use of nitrogen fertilizer or adoption of lodging‐resistant cultivars/hybrids that remain green when the grains are due to ripen results in a low harvest index with much nonstructural carbohydrate (NSC) left in the straw. Usually, water stress during the grain‐filling period induces early senescence, reduces photosynthesis, and shortens the grain‐filling period; however, it increases the remobilization of NSC from the vegetative tissues to the grain. If mild soil drying is properly controlled during the later grain‐filling period in rice ( Oryza sativa ) and wheat ( Triticum aestivum ), it can enhance whole‐plant senescence, lead to faster and better remobilization of carbon from vegetative tissues to grains, and accelerate the grain‐filling rate. In cases where plant senescence is unfavorably delayed, such as by heavy use of nitrogen and the introduction of hybrids with strong heterosis, the gain from the enhanced remobilization and accelerated grain‐filling rate can outweigh the loss of reduced photosynthesis and the shortened grain‐filling period, leading to an increased grain yield, better harvest index and higher water‐use efficiency. Contents Summary 223 I. Introduction 224 II. Problems in grain filling: unfavorably delayed whole‐plant senescence 224 III. Controlled soil drying improves carbon remobilization and grain filling as a result of enhanced whole‐plant senescence 225 IV. Hormonal regulation of whole‐plant senescence and grain filling 229 V. Activities of key enzymes involved in carbon remobilization and grain filling 230 VI. Conclusions 232 Acknowledgements 232 References 232

Abstract Crumpled nitrogen‐doped MXene nanosheets with strong physical and chemical coadsorption of polysulfides are synthesized by a novel one‐step approach and then utilized as a new sulfur host for lithium–sulfur batteries. The nitrogen‐doping strategy enables introduction of heteroatoms into MXene nanosheets and simultaneously induces a well‐defined porous structure, high surface area, and large pore volume. The as‐prepared nitrogen‐doped MXene nanosheets have a strong capability of physical and chemical dual‐adsorption for polysulfides and achieve a high areal sulfur loading of 5.1 mg cm –2 . Lithium–sulfur batteries, based on crumpled nitrogen‐doped MXene nanosheets/sulfur composites, demonstrate outstanding electrochemical performances, including a high reversible capacity (1144 mA h g –1 at 0.2C rate) and an extended cycling stability (610 mA h g –1 at 2C after 1000 cycles).