Australian Centre for Neutron Scattering

The energy costs associated with large-scale industrial separation of light hydrocarbons by cryogenic distillation could potentially be lowered through development of selective solid adsorbents that operate at higher temperatures. Here, the metal-organic framework Fe(2)(dobdc) (dobdc(4-) : 2,5-dioxido-1,4-benzenedicarboxylate) is demonstrated to exhibit excellent performance characteristics for separation of ethylene/ethane and propylene/propane mixtures at 318 kelvin. Breakthrough data obtained for these mixtures provide experimental validation of simulations, which in turn predict high selectivities and capacities of this material for the fractionation of methane/ethane/ethylene/acetylene mixtures, removal of acetylene impurities from ethylene, and membrane-based olefin/paraffin separations. Neutron powder diffraction data confirm a side-on coordination of acetylene, ethylene, and propylene at the iron(II) centers, while also providing solid-state structural characterization of the much weaker interactions of ethane and propane with the metal.

Abstract A peak fitting procedure has been implemented for calculating crystallinity in granular starches. This methodology, widely used for synthetic polymers, is proposed to better reflect the crystalline content of starches than the method normally used, in which it is assumed that relatively perfect crystalline domains are interspersed with amorphous regions. The new approach takes into account irregularities in crystals that are expected to exist in semicrystalline materials. Therefore, instead of assuming that the amorphous background extends up to the base of diffraction peaks, the whole X‐ray diffraction (XRD) profile is fitted to an amorphous halo and several discrete crystalline diffraction peaks. The crystallinity values obtained from the XRD patterns of a wide range of native starches using this fitting technique are very similar to the double helix contents as measured by 13C solid state NMR, suggesting that double helices in granular starches are present within irregular crystals. This contrasts with previous descriptions of crystalline and noncrystalline double helices that were based on the analysis of XRD profiles as perfect crystals interspersed in a noncrystalline background. Furthermore, with this fitting methodology it is possible to calculate the contribution from the different crystal polymorphs of starch to the total crystallinity. © 2008 Wiley Periodicals, Inc. Biopolymers 89: 761–768, 2008. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com

Most P2-type layered oxides exhibit Na(+)/vacancy-ordered superstructures because of strong Na(+)-Na(+) interaction in the alkali metal layer and charge ordering in the transition metal layer. These superstructures evidenced by voltage plateaus in the electrochemical curves limit the Na(+) ion transport kinetics and cycle performance in rechargeable batteries. Here we show that such Na(+)/vacancy ordering can be avoided by choosing the transition metal ions with similar ionic radii and different redox potentials, for example, Cr(3+) and Ti(4+). The designed P2-Na(0.6)[Cr(0.6)Ti(0.4)]O2 is completely Na(+)/vacancy-disordered at any sodium content and displays excellent rate capability and long cycle life. A symmetric sodium-ion battery using the same P2-Na(0.6)[Cr(0.6)Ti(0.4)]O2 electrode delivers 75% of the initial capacity at 12C rate. Our contribution demonstrates that the approach of preventing Na(+)/vacancy ordering by breaking charge ordering in the transition metal layer opens a simple way to design disordered electrode materials with high power density and long cycle life.

The air-free reaction between FeCl(2) and H(4)dobdc (dobdc(4-) = 2,5-dioxido-1,4-benzenedicarboxylate) in a mixture of N,N-dimethylformamide (DMF) and methanol affords Fe(2)(dobdc)·4DMF, a metal-organic framework adopting the MOF-74 (or CPO-27) structure type. The desolvated form of this material displays a Brunauer-Emmett-Teller (BET) surface area of 1360 m(2)/g and features a hexagonal array of one-dimensional channels lined with coordinatively unsaturated Fe(II) centers. Gas adsorption isotherms at 298 K indicate that Fe(2)(dobdc) binds O(2) preferentially over N(2), with an irreversible capacity of 9.3 wt %, corresponding to the adsorption of one O(2) molecule per two iron centers. Remarkably, at 211 K, O(2) uptake is fully reversible and the capacity increases to 18.2 wt %, corresponding to the adsorption of one O(2) molecule per iron center. Mössbauer and infrared spectra are consistent with partial charge transfer from iron(II) to O(2) at low temperature and complete charge transfer to form iron(III) and O(2)(2-) at room temperature. The results of Rietveld analyses of powder neutron diffraction data (4 K) confirm this interpretation, revealing O(2) bound to iron in a symmetric side-on mode with d(O-O) = 1.25(1) Å at low temperature and in a slipped side-on mode with d(O-O) = 1.6(1) Å when oxidized at room temperature. Application of ideal adsorbed solution theory in simulating breakthrough curves shows Fe(2)(dobdc) to be a promising material for the separation of O(2) from air at temperatures well above those currently employed in industrial settings.

The preparation and characterization of a series of magnesium(II) iodide complexes incorporating beta-diketiminate ligands of varying steric bulk and denticity, namely, [(ArNCMe)(2)CH](-) (Ar=phenyl, ((Ph)Nacnac), mesityl ((Mes)Nacnac), or 2,6-diisopropylphenyl (Dipp, (Dipp)Nacnac)), [(DippNCtBu)(2)CH](-) ((tBu)Nacnac), and [(DippNCMe)(Me(2)NCH(2)CH(2)NCMe)CH](-) ((Dmeda)Nacnac) are reported. The complexes [((Ph)Nacnac)MgI(OEt(2))], [((Mes)Nacnac)MgI(OEt(2))], [((Dmeda)Nacnac)MgI(OEt(2))], [((Mes)Nacnac)MgI(thf)], [((Dipp)Nacnac)MgI(thf)], [((tBu)Nacnac)MgI], and [((tBu)Nacnac)MgI(DMAP)] (DMAP=4-dimethylaminopyridine) were shown to be monomeric by X-ray crystallography. In addition, the related beta-diketiminato beryllium and calcium iodide complexes, [((Mes)Nacnac)BeI] and [{((Dipp)Nacnac)CaI(OEt(2))}(2)] were prepared and crystallographically characterized. The reductions of all metal(II) iodide complexes by using various reagents were attempted. In two cases these reactions led to the magnesium(I) dimers, [((Mes)Nacnac)MgMg((Mes)Nacnac)] and [((tBu)Nacnac)MgMg((tBu)Nacnac)]. The reduction of a 1:1 mixture of [((Dipp)Nacnac)MgI(OEt(2))] and [((Mes)Nacnac)MgI(OEt(2))] with potassium gave a low yield of the crystallographically characterized complex [((Dipp)Nacnac)Mg(mu-H)(mu-I)Mg((Mes)Nacnac)]. All attempts to form beryllium(I) or calcium(I) dimers by reductions of [((Mes)Nacnac)BeI], [{((Dipp)Nacnac)CaI(OEt(2))}(2)], or [{((tBu)Nacnac)CaI(thf)}(2)] have so far been unsuccessful. The further reactivity of the magnesium(I) complexes [((Mes)Nacnac)MgMg((Mes)Nacnac)] and [((tBu)Nacnac)MgMg((tBu)Nacnac)] towards a variety of Lewis bases and unsaturated organic substrates was explored. These studies led to the complexes [((Mes)Nacnac)Mg(L)Mg(L)((Mes)Nacnac)] (L=THF or DMAP), [((Mes)Nacnac)Mg(mu-AdN(6)Ad)Mg((Mes)Nacnac)] (Ad=1-adamantyl), [((tBu)Nacnac)Mg(mu-AdN(6)Ad)Mg((tBu)Nacnac)], and [((Mes)Nacnac)Mg(mu-tBu(2)N(2)C(2)O(2))Mg((Mes)Nacnac)] and revealed that, in general, the reactivity of the magnesium(I) dimers is inversely proportional to their steric bulk. The preparation and characterization of [((tBu)Nacnac)Mg(mu-H)(2)Mg((tBu)Nacnac)] has shown the compound to have different structural and physical properties to [((tBu)Nacnac)MgMg((tBu)Nacnac)]. Treatment of the former with DMAP has given [((tBu)Nacnac)Mg(H)(DMAP)], the X-ray crystal structure of which disclosed it to be the first structurally authenticated terminal magnesium hydride complex. Although attempts to prepare [((Mes)Nacnac)Mg(mu-H)(2)Mg((Mes)Nacnac)] were not successful, a neutron diffraction study of the corresponding magnesium(I) complex, [((Mes)Nacnac)MgMg((Mes)Nacnac)] confirmed that the compound is devoid of hydride ligands.

Analysis of the CO2 adsorption properties of a well-known series of metal–organic frameworks M2(dobdc) (dobdc4− = 2,5-dioxido-1,4-benzenedicarboxylate; M = Mg, Mn, Fe, Co, Ni, Cu, and Zn) is carried out in tandem with in situ structural studies to identify the host–guest interactions that lead to significant differences in isosteric heats of CO2 adsorption. Neutron and X-ray powder diffraction and single crystal X-ray diffraction experiments are used to unveil the site-specific binding properties of CO2 within many of these materials while systematically varying both the amount of CO2 and the temperature. Unlike previous studies, we show that CO2 adsorbed at the metal cations exhibits intramolecular angles with minimal deviations from 180°, a finding that indicates a strongly electrostatic and physisorptive interaction with the framework surface and sheds more light on the ongoing discussion regarding whether CO2 adsorbs in a linear or nonlinear geometry. This has important implications for proposals that have been made to utilize these materials for the activation and chemical conversion of CO2. For the weaker CO2 adsorbents, significant elongation of the metal–O(CO2) distances are observed and diffraction experiments additionally reveal that secondary CO2 adsorption sites, while likely stabilized by the population of the primary adsorption sites, significantly contribute to adsorption behavior at ambient temperature. Density functional theory calculations including van der Waals dispersion quantitatively corroborate and rationalize observations regarding intramolecular CO2 angles and trends in relative geometric properties and heats of adsorption in the M2(dobdc)–CO2 adducts.

Monodisperse mesoporous anatase titania beads with high surface areas and tunable pore size and grain diameter have been prepared through a combined sol-gel and solvothermal process in the presence of hexadecylamine (HDA) as a structure-directing agent. The monodispersity of the resultant titania beads, along with the spherical shape, can be controlled by varying the amount of structure-directing agent involved in the sol-gel process. The diameter of the titania beads is tunable from approximately 320 to 1150 nm by altering the hydrolysis and condensation rates of the titanium alkoxide. The crystallite size, specific surface area (from 89 to 120 m(2)/g), and pore size distribution (from 14 to 23 nm) of the resultant materials can be varied through a mild solvothermal treatment in the presence of varied amounts of ammonia. On the basis of the results of small-angle XRD, high-resolution SEM/TEM, and gas sorption characterization, a mechanism for the formation of the monodisperse precursor beads has been proposed to illustrate the role of HDA in determining the morphology and monodispersity during the sol-gel synthesis. The approach presented in this study demonstrates that simultaneous control of the physical properties, including specific surface area, mesoporosity, crystallinity, morphology, and monodispersity, of the titania materials can be achieved by a facile sol-gel synthesis and solvothermal process.

Low-pressure adsorption of carbon dioxide and nitrogen was studied in both acidic and copper-exchanged forms of SSZ-13, a zeolite containing an 8-ring window. Under ideal conditions for industrial separations of CO(2) from N(2), the ideal adsorbed solution theory selectivity is >70 in each compound. For low gas coverage, the isosteric heat of adsorption for CO(2) was found to be 33.1 and 34.0 kJ/mol for Cu- and H-SSZ-13, respectively. From in situ neutron powder diffraction measurements, we ascribe the CO(2) over N(2) selectivity to differences in binding sites for the two gases, where the primary CO(2) binding site is located in the center of the 8-membered-ring pore window. This CO(2) binding mode, which has important implications for use of zeolites in separations, has not been observed before and is rationalized and discussed relative to the high selectivity for CO(2) over N(2) in SSZ-13 and other zeolites containing 8-ring windows.

Vying for newer sodium-ion chemistry for rechargeable batteries, Na 2 FeP 2 O 7 pyrophosphate has been recently unveiled as a 3 V high-rate cathode. In addition to its low cost and promising electrochemical performance, here we demonstrate Na 2 FeP 2 O 7 as a safe cathode with high thermal stability. Chemical/electrochemical desodiation of this insertion compound has led to the discovery of a new polymorph of NaFeP 2 O 7 . High-temperature analyses of the desodiated state NaFeP 2 O 7 show an irreversible phase transition from triclinic ( P 1̅) to the ground state monoclinic ( P 2 1 / c ) polymorph above 560 °C. It demonstrates high thermal stability, with no thermal decomposition and/or oxygen evolution until 600 °C, the upper limit of the present investigation. This high operational stability is rooted in the stable pyrophosphate (P 2 O 7 ) 4– anion, which offers better safety than other phosphate-based cathodes. It establishes Na 2 FeP 2 O 7 as a safe cathode candidate for large-scale economic sodium-ion battery applications.

Owing to their high conductivity, crystalline Li 7–3 x Ga x La 3 Zr 2 O 12 garnets are promising electrolytes for all-solid-state lithium-ion batteries. Herein, the influence of Ga doping on the phase, lithium-ion distribution, and conductivity of Li 7–3 x Ga x La 3 Zr 2 O 12 garnets is investigated, with the determined concentration and mobility of lithium ions shedding light on the origin of the high conductivity of Li 7–3 x Ga x La 3 Zr 2 O 12 . When the Ga concentration exceeds 0.20 Ga per formula unit, the garnet-type material is found to assume a cubic structure, but lower Ga concentrations result in the coexistence of cubic and tetragonal phases. Most lithium within Li 7–3 x Ga x La 3 Zr 2 O 12 is found to reside at the octahedral 96 h site, away from the central octahedral 48 g site, while the remaining lithium resides at the tetrahedral 24 d site. Such kind of lithium distribution leads to high lithium-ion mobility, which is the origin of the high conductivity; the highest lithium-ion conductivity of 1.46 mS/cm at 25 °C is found to be achieved for Li 7–3 x Ga x La 3 Zr 2 O 12 at x = 0.25. Additionally, there are two lithium-ion migration pathways in the Li 7–3 x Ga x La 3 Zr 2 O 12 garnets: 96 h -96 h and 24 d -96 h -24 d, but the lithium ions transporting through the 96 h -96 h pathway determine the overall conductivity.

This paper highlights current research progress and future prospects of high-voltage spinel LiNi 0.5 Mn 1.5 O 4 cathode for next-generation high-enegy-density lithium-ion batteries.

Phytantriol (3,7,11,15-tetramethylhexadecane-1,2,3-triol, PHYT) is a cosmetic ingredient that exhibits similar lyotropic phase behavior to monoolein (GMO), forming bicontinuous cubic liquid crystalline structures (Q(II)) at low temperatures and reversed hexagonal phase (H(II)) at higher temperatures in excess water. Despite these similarities, phytantriol has received little attention in the scientific community. In this study, the thermal phase behavior of the binary PHYT-water and ternary PHYT-vitamin E acetate (VitEA)-water systems have been studied and compared with the behavior of the dispersed cubosomes and hexosomes formed with the aid of a stabilizer (Pluronic F127). The phase behavior and nanostructure were studied using crossed polarized light microscopy (CPLM), differential scanning calorimetry (DSC), and small-angle X-ray scattering (SAXS) techniques. The presence of lipophilic VitEA in the PHYT-water system suppressed the temperature of the Q(II)-to-H(II)-to-L2 transitions, indicating that lipophilic compounds, in relatively small amounts, may have a significant impact on the phase behavior. Increasing the F127 concentration in the phytantriol-based cubosome system did not induce the Q(II)(Pn3m) to Q(II)(Im3m) transition known for the GMO-water system. This indicates a different mode of interaction between F127 and the lipid domains of phytantriol-water systems. Taken together, these results indicate that phytantriol may not only provide an alternative lipid for preparation of liquid crystalline systems in excess water but may also provide access to properties not available when using GMO.

This article describes a variable temperature solid-state NMR and single crystal X-ray/neutron diffraction study of the hybrid perovskites (CH 3 NH 3 )PbX 3 (X = I, Br and Cl).

High energy density was achieved in lead-free La-doped AgNbO 3 antiferroelectric ceramics.

The action behind contraction: The metal–organic framework [Cu3(btc)2] displays negative thermal expansion (NTE) over a broad temperature range. This property arises from two coincident mechanisms, each of which are unique for NTE systems: the concerted transverse vibration of triangular organic linkers, and the local dynamic distortion of dinuclear metal centers within the framework lattice.

Enzymatic digestion of six starches of different botanical origin was studied in real time by in situ time-resolved small-angle neutron scattering (SANS) and complemented by the analysis of native and digested material by X-ray diffraction, differential scanning calorimetry, small-angle X-ray scattering, and scanning electron microscopy with the aim of following changes in starch granule nanostructure during enzymatic digestion. This range of techniques enables coverage over five orders of length-scale, as is necessary for this hierarchically structured material. Starches studied varied in their digestibility and displayed structural differences in the course of enzymatic digestion. The use of time-resolved SANS showed that solvent-drying of digested residues does not induce any structural artifacts on the length scale followed by small-angle scattering. In the course of digestion, the lamellar peak intensity gradually decreased and low-q scattering increased. These trends were more substantial for A-type than for B-type starches. These observations were explained by preferential digestion of the amorphous growth rings. Hydrolysis of the semicrystalline growth rings was explained on the basis of a liquid-crystalline model for starch considering differences between A-type and B-type starches in the length and rigidity of amylopectin spacers and branches. As evidenced by differing morphologies of enzymatic attack among varieties, the existence of granular pores and channels and physical penetrability of the amorphous growth ring affect the accessibility of the enzyme to the substrate. The combined effects of the granule microstructure and the nanostructure of the growth rings influence the opportunity of the enzyme to access its substrate; as a consequence, these structures determine the enzymatic digestibility of granular starches more than the absolute physical densities of the amorphous growth rings and amorphous and crystalline regions of the semicrystalline growth rings.

Portable near-infrared (NIR) light sources are in high demand for applications in spectroscopy, night vision, bioimaging, and many others. Typical phosphor designs feature isolated Cr 3+ ion centers, and it is challenging to design broadband NIR phosphors based on Cr 3+ –Cr 3+ pairs. Here, we explore the solid-solution series SrAl 11.88– x Ga x O 19:0.12Cr 3+ ( x = 0, 2, 4, 6, 8, 10, and 12) as phosphors featuring Cr 3+ –Cr 3+ pairs and evaluate structure–property relations within the series. We establish the incorporation of Ga within the magentoplumbite-type structure at five distinct crystallographic sites and evaluate the effect of this incorporation on the Cr 3+ –Cr 3+ ion pair proximity. Electron paramagnetic measurements reveal the presence of both isolated Cr 3+ and Cr 3+ –Cr 3+ pairs, resulting in NIR luminescence at approximately 650–1050 nm. Unexpectedly, the origin of broadband NIR luminescence with a peak within the range 740–820 nm is related to the Cr 3+ –Cr 3+ ion pair. We demonstrate the application of the SrAl 5.88 Ga 6 O 19:0.12Cr 3+ phosphor, which possesses an internal quantum efficiency of ∼85%, a radiant flux of ∼95 mW, and zero thermal quenching up to 500 K. This work provides a further understanding of spectral shifts in phosphor solid solutions and in particular the application of the magentoplumbites as promising next-generation NIR phosphor host systems.

Determining the structures of nanoparticles at atomic resolution is vital to understand their structure-property correlations. Large metal nanoparticles with core diameter beyond 2 nm have, to date, eluded characterization by single-crystal X-ray analysis. Here we report the chemical syntheses and structures of two giant thiolated Ag nanoparticles containing 136 and 374 Ag atoms (that is, up to 3 nm core diameter). As the largest thiolated metal nanoparticles crystallographically determined so far, these Ag nanoparticles enter the truly metallic regime with the emergence of surface plasmon resonance. As miniatures of fivefold twinned nanostructures, these structures demonstrate a subtle distortion within fivefold twinned nanostructures of face-centred cubic metals. The Ag nanoparticles reported in this work serve as excellent models to understand the detailed structure distortion within twinned metal nanostructures and also how silver nanoparticles can span from the molecular to the metallic regime.

In this article, we report the functionalization of alkyne-terminated alkyl monolayers on Si(100) using "click" chemistry, specifically, the Cu(I)-catalyzed Huisgen 1,3-dipolar cycloaddition reaction of azides with surface-bound alkynes. Covalently immobilized, structurally well-defined acetylene-terminated organic monolayers were prepared from a commercially available terminal diyne species using a one-step hydrosilylation procedure. Subsequent derivatization of the alkyne-terminated monolayers in aqueous environments with representative azide species via a selective, reliable, robust cycloaddition process afforded disubstituted surface-bound [1,2,3]-triazole species. Neither activation procedures nor protection/deprotection steps were required, as is the case with more established grafting approaches for silicon surfaces. Detailed characterization using X-ray photoelectron spectroscopy and X-ray reflectometry demonstrated that the surface acetylenes had reacted in moderate to high yield to give surfaces exposing alkyl chains, oligoether anti-fouling moieties, and functionalized aromatic structures. These results demonstrate that click immobilization offers a versatile, experimentally simple, chemically unambiguous modular approach to producing modified silicon surfaces with organic functionality for applications as diverse as biosensors and molecular electronics.

Layered α-Ni(OH) 2 and its derivative bimetallic hydroxides (e.g., α-(Ni/Co)(OH) 2 ) have attracted much attention due to their high specific capacitance, although their insufficient cycling stability has blocked their wide application in various technologies. In this work, we demonstrate that the cycling performance of α-(Ni/Co)(OH) 2 can be obviously enhanced via the intrinsic pillar effect of metaborate. Combining the high porosity feature of the metaborate stabilized α-(Ni/Co)(OH) 2 and the improved electronic conductivity offered by graphene substrate, the average capacitance fading rate of the metaborate stabilized α-(Ni/Co)(OH) 2 is only ∼0.0017% per cycle within 10 000 cycles at the current density of 5 A g –1 . The rate performance is excellent over a wide temperature range from −20 to 40 °C. We believe that the enhancements should mainly be ascribed to the excellent structural stability offered by the metaborate pillars, and the detailed mechanism is discussed.